• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.34-37
• /
• 2000

The effect of novel N-crotyl-N,N-dimethyl-4-methylanilinium hexafluroantimonate (CMH) curing agent on cure behavior and thermal properties of DGEBA epoxy cationic system was investigated. From DSC measurements of DGEBA/CMH system, it was shown that this system exhibits an excellent thermal latent characteristic in a given temperature and reveals complex cure behavior as indicated by multiple exotherms. The conversion and conversion rate of DGEBA/CMH system increased with increasing the concentration of initiator due to high activity of CMH. Viscoelastic properties during gel formation of DGEBA with CMH were investigated by rheological techniques under isothermal condition. The gel time obtained from the modulus crossover. point t(G')=G", was affected by high curing temperature and concentration of CMH, resulting in high degree of network formation in cationic polymerization. The thermal stabilities were discussed in terms of the activation energy for decomposition and thermal factors determined from TGA measurements.ents.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.378-384
• /
• 2010

Regenerated cellulose was prepared from Buckeye wood pulp V60 via dissolution in N-methylmorpholin N-oxide (NMMO) solvent system. The effect of antioxidants such as, n-propylgallate (PG), tris(nonylphenyl) phosphite (TRIS), ethylenediamine tetraacetic acid disodium salt (EDTA), and magnesium sulfate on the properties of regenerated cellulose was studied using X-ray diffraction, copper index calculation, and viscometry. Only addition of more than 0.01% of PG into NMMO solvent was effective to avoid the reduction of the degree of polymerization(DP) of regenerated cellulose during dissolution at $110^{\circ}C$. However, the early stage(within 0.5h of dissolution process) degradation of cellulose was not prevented eventhough up to 0.5% PG was appled to hot NMMO system. In addition, to recover the expensive NMMO after cellulose regenerating process, the washing filtrate was studied using simple techniques, such as refractive index, pH, and conductivity measurements. Through conductivity measurement result, 4-time of washing was enough to remove the NMMO completely from regenerated cellulose.

• 대한화장품학회지
• /
• 제28권1호
• /
• pp.214-224
• /
• 2002

High concentrated $TiO_2$ nano colloids were synthesized by sol-gel method. Reactions were performed in $TiCl_4$/HCl/$H_2O$ aqueous solution and the conditions of particles such as shape, size and aggregation, etc. were controlled by polymerization and adsorption of acrylamide in surface of $TiO_2$ nano particles. And also, aminopropyltriethoxysilane was added instead of acrylamide and compared each other. The prepared colloids were well dispersed and showed the strong absorption peaks at 350nm-370nm which is blue shifted to 20-30nm, compared to macro particles. The obtained techniques from $TiO_2$ nato colloids synthesis were utilized in coating on boron nitride powders which are nonpolar and isoelectronic materials of carbon. Their surface morphology, structure, thermal stability and U. V absorption chracteristics were examined by SEM(Scanning Electron Microscopy), XRD(X-ray diffraction), TG/DTA(Thermogravimetric and Differential Thermal Analysis), UV-VIS(Ultraviolet-Visible Spectroscopy).

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 춘계학술대회
• /
• pp.235-237
• /
• 2001

;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.

• 폴리머
• /
• 제30권2호
• /
• pp.146-151
• /
• 2006

폴리(에틸렌 글리콜)(PEG)과 생분해성 폴리에스터 그룹의 폴리카프로락톤(PCL)으로 이루어진 선형 및 분지 구조의 공중합체를 합성하고 분자 구조에 따른 다양한 특성을 비교하였다. 선형 및 분지 구조의 1-arm-PEG-PCL, 2-arm-PEG-PCL, 4-arm-PEG-PCL 및 8-arm-PEG-PCL 공중합체는 단량체 활성화제로서 Hcl $Et_2O$의 존재 하에 상온에서 카프로락톤$({\varepsilon}-CL)$의 개환중합에 의해 합성하였다. 합성된 선형 및 분지 구조의 공중합체는 $^{1}H-NMR$, GPC, DSC 및 XRD의 측정을 통해 특성을 분석하였다. 그 결과 공중합체의 가지 수에 따라 열적 특성 및 결정성이 다르게 나타나는 것을 확인하였다. 그리고 각 공중합체의 수용액상에서의 미셀 특성은 $^{1}H-NMR$, 광산란기, 원자 현미경 및 형광 측정기를 이용하여 확인하였다. 공중합체의 가지 수가 증가할수록 임계 미셀 농도 값과 미셀의 직경이 증가하는 것을 알 수 있었다. 또한 원자 현미경을 통해 관찰된 미셀의 형태는 선형 및 분지 구조의 공중합체 모두 구형으로 존재함을 확인할 수 있었다. 따라서 본 연구에서는 분자 설계를 통해 선형 및 분지 구조의 공중합체를 합성하여 각 공중합체의 분자 구조에 따른 다양한 특성을 비교하였으며 수용액상에서 형성된 미셀의 거동을 검토하여 소수성 약물 전달체로서의 가능성을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제33권5호
• /
• pp.428-434
• /
• 2008

본 연구는 1급 복합레진 수복물에서 할로겐 광조사기를 이용한 4가지 중합방법이 상아질의 결합강도에 미치는 효과를 알아보기 위하여 시행하였다. 발거된 상 하악 대구치 20개의 교합면측 법랑질을 Diamond Wheel Saw를 이용하여 제거한 후 1급 와동을 형성하였다. 중합방법에 따라 파동지연 중합방법 (PD) 군, 연성 중합방법 (SS) 군, 파동 중합방법 (PC) 군, 지속 중합방법 (CC) 군의 4개 군으로 분류하고, Z250 복합레진을 각 군의 와동에 충전한 후 광조사하였다. 각 군의 시편을 주수하에 접착계면의 단면적이 $1mm^2$가 되도록 절단하여 막대모양의 시편을 제작하였고, 각 군당 20개의 시편을 사용하여 미세인장 결합강도를 측정하여 다음과 같은 결과를 얻었다. 1. PD 군은 PC 군과 CC 군보다 통계학적으로 더 높은 미세인장 결합강도를 나타내었다. 2. SS군의 미세인장 결합강도는 PC 군과 CC 군보다 높게 나타났으나, 통계학적으로 유의한 차이를 나타내지 않았다. 결론적으로, 1급 복합레진 수복물을 중합할 때 파동지연 중합방법과 연성 중합방법을 사용하여 중합속도를 조절함으로써 상아질과 복합레진의 결합강도를 개선할 수 있을 것으로 사료된다.

• 공업화학
• /
• 제17권2호
• /
• pp.132-137
• /
• 2006

Methyl methacrylate (MMA), 2-hydroxy ethylmethacrylate (2-HEMA), n-butyl acrylate (n-BA) acrylic acid (AAc)를 아크릴레이트 단량체로 사용하고 친수성기인 카르복실 말단기를 갖는 수분산성 폴리우레탄을 시드로 하여 시드중합 방법을 이용한 폴리우레탄 아크릴레이트 하이브리드 에멀젼을 합성하였다. 합성된 혼성 에멀젼의 입자경과 폴리우레탄 수분산체의 입자경과 단독 아크릴레이트 에멀젼의 입자경 그리고 수분산 폴리우레탄과 아크릴레이트 에멀젼을 기계적으로 브랜드한 혼합물의 입자경을 입도 분석기를 이용하여 입자의 크기 및 분포를 측정하였고 하이브리드한 에멀젼은 기계적으로 브랜드한 에멀젼보다 평균입자경이 큰 것을 알 수 있었다 그리고 수분기 용매에 대한 팽윤을 비교 분석하였다. 또한 물리 화학적 물성을 개선하기 위하여 폴리우레탄 아크릴레이트 하이브리드 에멀젼에 멜라민 포름알데히드 경화제의 첨가에 따른 효과를 비교하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.96-104
• /
• 2015

Fischer Tropsch reaction is one of the interesting topic for renewable and clean energy. Polymerization of carbon monoxide or carbon dioxide with hydrogen over metal supported catalyst can produce long chain hydrocarbons. Synthetic liquid hydrocarbons are promising alternative to fossil fuels. This research work has been focused on the synthesis of Fe based catalyst for Fischer Tropsch reaction. Mesoporous silica (MS) support prepared by a precipitation method using two different washing solution, distilled water (DW) and acid in ethanol solution (ET), and different calcination temperature. Then, Fe/MS was prepared by an incipient wetness impregnation method. All of samples were systematically characterized using various physical and chemical techniques. TEM and XRD analysis were used to ensure that the cubic Ia3d mesostructure is stable after calcination. FTIR spectra are useful to ascertain the existence of template in the support. TPR studies were also used to understand the nature of Fe species and their reducibility. The results reveal that washing the support with distilled water and calcination at $550^{\circ}C$ can efficiently remove the triblock copolymer templates. The existence of template in the support affects the textural properties of all catalyst investigated.

• 한국의류산업학회지
• /
• 제20권4호
• /
• pp.439-448
• /
• 2018

This thesis intends to suggest a new wedding dress pattern through researches on history and changes of wedding dress, researches on silhouette and details and analyses of existing basic patterns. In this study, to develop torso patterns of top dresses selected as preferred designs through literature reviews and company surveys, dress form sizes suitable for standard sizes were selected and study basic patterns were made using draping techniques. The study finds characteristics of body type dimension that is changed when wearing brassiere (hereinafter, 'bra') for wedding dress through customer surveys for development of basic patterns of wedding dress. That is, wearing wedding bra was used for the purpose of increasing the bust size and we will evaluate later whether this increase helps completeness of aesthetic impression through wearing evaluation. As the result, it was found out that top torso pattern wearing wedding bra made wearers feel more comfortable and in the aspect of aesthetic impression, it provided impacts on women's beautiful silhouettes. The effects of whether a bra is used or not on changes in patterns were reviewed through the degree of polymerization of finished patterns. When a bra for dresses was worn, the waist front length increased by1.7cm, the bust circumference increased by 2.1cm, and the amount of dart increased by 1.5cm in the patterns. A new torso pattern for top dresses, which will solve problems evaluated in each of the above from the aspect of composition of pattern by a method through analysis of existing basic patterns and multi-dimensional cut patterns wearing wedding bra, will be suggested.

• 대한치과의사협회지
• /
• 제57권12호
• /
• pp.747-756
• /
• 2019

This paper reviews the adaptation accuracy and mechanical properties of currently used denture processing systems with base resin materials and introduces the latest research on the development of antimicrobial denture base resins. Poly(methyl methacrylate) has been successfully used as a dental denture base resin material by the compress-molding method and heat polymerization for a long time, but recently, new processing techniques, injection molding-methods or fluid-resin technique are also used for fabricating denture base. However, studies indicated that there was no difference between the injectionmolding and the conventional compression-molding method in terms of adaption accuracy of denture base. The fluid-resin fabrication and one injection-molding systems exhibited better adaptation accuracy than the other processing methods. Resin denture bases in the oral cavity may undergo midline fractures due to flexural fatigue from repeated masticatory loading. For those patients, impact resistant denture base resins are recommended to prevent denture fracture during service. Thermoplastic denture base resins can be helpful for patients suffering from allergic reaction to resin monomers with a soft-fit, however, thermoplastic resins with low stiffness can irritate gum tissues and accelerate abnormal alveolar ridge resorption. Moreover, due to low chemical durability in oral cavity, those should be used for a limited period of time.