• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.194-197
• /
• 2004

In this paper, compressive characteristics of carbon fabric skin with polymeric foam core sandwich structure were investigated by FE analyses and compressive tests of polyurethane foam were also conducted with respect to temperature changes, which were determined by curing processes of epoxy or polyester resin to obtain mechanical behaviour of polyurethane foam. FE analyses indicated variation of parameters with respect to manufacturing pressure, which have comparatively massive effect upon mechanical properties of sandwich structures, i.e. wavelength as well as crimp angle of carbon fabric

• Journal of the Korean Wood Science and Technology
• /
• 제38권5호
• /
• pp.414-420
• /
• 2010

The effect of polymeric diphenyl methane-4,4-diisocyanate (pMDI) or 1,6-hexamethylene diisocyanate (HDI) in the UMF resin was discussed for improvement of the dry and wet shear strengths of plywood manufactured from high moisture content veneers. The curing behavior of UMF resin by pMDI or HDI content was examined by DSC and TGA, and its adhesion performance was evaluated by dry and wet shear strength tests of plywood. With the increase of pMDI content in the UMF resin, the curing temperature, reaction enthalpy (${\Delta}H$), and thermal stability consistently increased. With the increase of HDI content in the UMF resin, however, the curing temperature and reaction enthalpy (${\Delta}H$) decreased consistently and the thermal stability slightly increased in the range of 200 to $400^{\circ}C$ but decreased beyond $400^{\circ}C$. Also, the dry tensile shear strength increased up to the pMDI content of 5% and then decreased with its further addition but the wet tensile shear strength showed slight tendency to increase with the increase of pMDI content in the UMF resin. As the HDI content increased, however, the dry and wet tensile shear strengths of plywood consistently increased.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1247-1250
• /
• 2008

This presentation highlights work from the authors' laboratories on the various kinds of oxide optical materials, mainly luminescence and pigment materials with different forms (powder, core-shell structures, thin film and patterning) prepared by the Pechini-type sol-gel (PSG) process. The PSG process which uses the common metal salts (nitrates, acetates, chlorides etc) as precursors and citric acid (CA) as chelating ligands of metal ions and polyhydroxy alcohol (such as ethylene glycol or poly ethylene glycol) as cross-linking agent to form a polymeric resin on molecular level, allowing the preparation of many forms of luminescent materials.

• Composites Research
• /
• 제20권4호
• /
• pp.1-8
• /
• 2007

본 연구에서는 에폭시 수지조합에 따른 탄소섬유강화 복합재 프리프레그 제작 및 극저온 인장시험을 통해 극저온에서 우수한 기계적 물성을 갖는 복합재 수지조합을 제시하였다. 환경챔버를 이용하여 상온으로부터 $-150^{\circ}C$ 까지 6회의 열-하중 사이클을 수행한 일방향 복합재 시편에 대하여 $-150^{\circ}C$에서 복합재의 인장강도와 강성을 측정하였다. 또한, $-150^{\circ}C$에서 복합재의 섬유수직방향 인장물성 및 면내 전단물성과 같은 모재 지배적인 물성 측정을 통해 수지조성변화가 섬유와 모재의 계면에 미치는 영향을 고찰하였다. 그 결과, bisphenol-A 형의 에폭시와 CTBN 고무 변성 형 필러를 비교적 다량으로 함유한 수지조성을 갖는 복합재 시편이 극저온에서 우수한 기계적 물성을 보임을 확인하였다.

• 한국광학회지
• /
• 제28권2호
• /
• pp.53-58
• /
• 2017

본 논문은 집적화된 소형의 분광모듈 구현을 위한 나노회절격자의 설계 및 제작에 관한 연구이다. 제안된 평면 구조의 나노회절격자는 회절격자로부터 반사된 빛을 집광하기 위하여 비등간격의 구조로 설계되었으며, 400 nm에서 650 nm까지의 파장 대역폭에서 균등한 분해능을 가지도록 비대칭 V 홈 구조를 가지도록 설계되었다. 최적 설계된 나노회절격자를 저가, 대량 생산에 적합한 UV-NIL 공정을 통해 제작하기 위하여 FT-IR 흡수스펙트럼을 분석하였으며, 이를 통해 5 nm 이내의 치수 정밀도를 가진 고분자 나노회절격자를 제작 할 수 있었다. 제작된 고분자 기반 나노회절격자를 이용한 집적형 분광모듈은 250 nm의 파장 대역폭에서 각 첨두파장의 기준으로 5 nm의 균등한 파장 분해능을 확인하였으며, 이는 다양한 분광모듈의 적용분야에 적용될 것으로 기대된다.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.976-980
• /
• 2010

A series of arylacetylene resins with siloxane units were synthesized by the condensation reactions of m-diethynylbenzene magnesium reagents with various $\alpha,\omega$-bis(chloro)dimethylsiloxanes. These resins are liquids and are miscible with common organic solvents at room temperature. The structures of the resins were characterized by FT-IR, $^1H$ NMR, $^{13}C$ NMR, $^{29}Si$ NMR, and gel permeation chromatography (GPC). The thermal behaviors of the resins were examined with differential scanning calorimetry (DSC). These resins have good processability. They can be thermally cross-linked through the ethynyl groups to produce cured resins. The thermal and thermooxidative stabilities of the cured resins were studied by thermogravimetric analysis (TGA). The cured resins possess high thermal and thermooxidative stability. Their decomposition occurs at above $500^{\circ}C$ in both $N_2$ and air. With increasing the length of siloxane units in the resins, the thermal stability of the cured resins decreases in $N_2$. When the cured resins were sintered above $1450^{\circ}C$ under argon, hard and glassy SiOC ceramics were obtained. These SiOC ceramics have the decomposition temperatures at 5% weight loss above $800^{\circ}C$ in air.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.125-131
• /
• 2005

Recently, to improve condition car park, using surface finishing material for variety color and property epoxy resin, urethane, cement mixed resin mortar or polymeric resin, and so on. However, it is frequent noise and wear out of tier and waterproofing materials, when the car slip or stop in car park, To minimize these cases, It is necessary that reduction of repair cost through performance long term durability of surface finishing material, improvement inside condition such as reduce dirty and car accident and ensurance the expected life of concrete slab in car park. Especially, we have not any tech for quality control, construction tech, production technology for car park surface materials, that's why park slab is not safety and suffer a loss. For this problems, this paper is to test surface finishing materials and as that result, suggest quality standard in the car park.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.364-367
• /
• 2007

In nano-imprint lithography (NIL) process, which has shown to be a good method to fabricate polymeric patterns, several kinds of pattern defects due to thermal effects during polymer flow and mold release operation have been reported. A typical defect in NIL process with high aspect ratio and low resist thickness pattern is a resist fracture during the mold release operation. It seems due to interfacial adhesion between polymer and mold. However, in the present investigation, FEM simulation of NIL molding process was carried out to predict the defects of the polymer pattern and to optimize the process by FEA. The embossing operation in NIL process was investigated in detail by FEM. From the analytical results, it was found that the lateral flow of polymer resin and the applied pressure in the embossing operation induce the weld line and the drastic lateral strain at the edge of pattern. It was also shown that the low polymer-thickness result in the delamination of polymer from the substrate. It seems that the above phenomena cause the defects of the final polymer pattern. To reduce the defect, it is important to check the initial resin thickness.

• 대한치과보철학회지
• /
• 제24권1호
• /
• pp.33-43
• /
• 1986

The purpose of this study was to compare the wear resistance of heat pressure-cured microcomposite(SR-Isosit-N), photo-cured microcomposite(Dentalcolor), unfilled heat-cured resin(Thermojel) and that of human enmel. Specimens were made with specially designed die and finally polished with #3,000 diamond paste. After 100,000 strokes of tooth brushing at electric tooth-brushing machine, mean thickness loss of each specimen was measured by using surface profile and integration. The results were as follows 1. Mean thickness loss were $84.3{\pm}27.3{\mu}m$ in unfiled heat-cured resin, $9.4{\pm}2.5{\mu}m$ in photocured microcomposite, $7.6{\pm}2.1{\mu}m$ in heat.pressure-cured microcomposite and $0.97{\pm}0.42{\mu}m$ in enamel. 2. Heat.pressure-cured microcomposite and photo-cured microcomposite had no difference in mean thickness loss(p>0.05). 3. Unfilled resin and microcomposite had much differences in mean thickness loss (p<0.005). 4. ha resins used in this experiment had too much mean thickness loss as compared with enamel (p<0.005).

• Journal of the Korean Wood Science and Technology
• /
• 제35권6호
• /
• pp.108-117
• /
• 2007

생장 기간이 매우 빠르고 섬유방향의 강도적 성질이 우수한 대나무를 합판의 원료로 이용하기 위하여 케루잉단판-솜대 zephyr 복합 패널(WBCB)의 제조 조건(수지접착제의 종류, 도포량, 도포방법)이 패널의 성능에 미치는 영향을 검토하였다. 수지의 종류에 따른 5-ply WBCB의 성능은 폴리메릭 이소시아네이트수지(PMDI)가 가장 좋은 결과를 나타내었으며, 이어 페놀수지(PF), 페놀 멜라민수지, 요소 멜라민수지 및 요소수지의 순이었다. 사용한 수지 중 강도적 측면과 작업성을 고려할 때 PF 수지에 의한 복합 패널 제조가 가장 적절한 것으로 생각된다. PF수지를 사용하여 제조한 12 mm 두께의 5-ply WBCB의 경우, 수지의 도포량이 증가하면 패널의 성능도 향상되는 경향이었다. 또한 박리강도 측정 후의 파괴양상은 도포량이 증가함에 따라 대나무 외층-대나무 내층 경계층의 파괴가 증가한 데 반하여 대나무 제퍼 내부층의 파괴는 상대적으로 감소하였다. 따라서 WBCB 제조시 수지가 다소 zephyr 내부까지 침투할 정도의 수지 도포량이 적절한 것으로 생각되며, 표면 단판의 오염성과 경제성 등을 고려할 때 $320g/m^2$이 가장 적합한 것으로 판단된다. 동일한 PF수지 도포량에서 수지의 도포방법을 달리하여 제조한 5-ply 복합 패널의 성능은 양면과 편면 스프레이 도포 간과 스프레이와 롤러에 의한 도포방법 간에 현저한 차이가 나타나지 않아 주어진 환경에서 작업성이 좋은 도포방법을 채택하면 될 것으로 생각된다.