• Tribology and Lubricants
• /
• v.11 no.5
• /
• pp.177-183
• /
• 1995

Recent work with phosphate esters has shown that a lubricious polymeric film can formed from the vapor phase on interacting during and sliding. This lubrication technique has led to methods to reduce friction and wear to very low values at high temperatures up to 700$^{\circ}$C. Preliminary with synthetic tri aryl phosphates are very promising. The vaporized lubricant forms a polymeric film on the sliding and rolling surfaces reducing the coefficient of friction below 0.05. In-situ formation of the polymeric films shows that the polymer that is formed on the surface exists in different states depending on surface temperature.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05a
• /
• pp.167-170
• /
• 2005

This paper summarizes the results of a series of numerical evaluations (Lee et al., 2004, 2005) on the performance of pre-cracked reinforced concrete (RC) beams coated with polymeric composites. It was intended to numerically show the superior characteristics of the polymeric composites for enhancing the strength and ductility of existing concrete structures. Further, the predicted load-carrying and energy absorbing capacities of the beams were compared with previous experiments to verify the predictive capability of implemented computational model.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.3
• /
• pp.189-193
• /
• 1996

Submicron-sized polymeric particles (SSPP) were used to remove nucleic acids and endotoxins from cell lysates. The positively charged SSPP selectively adsorb nucleic acids and endotoxins and form complexes with them. The complexes can be easily removed by sedimentation or centrifugation. The removal of nucleic acids and endotoxins using SSPP also can be accomplished in the presence of cell and cell debris. Therefore, nucleic acids and endotoxins can be removed in an initial step of the down-stream processes. In bakers yeast and E. coli lysate systems, the level of DNA could be reduced more than three orders of magnitudes and endotoxins more than seven orders of magnitudes concurrently willi the cell debris removal process using SSPP.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.5
• /
• pp.235-239
• /
• 2006

Charge dynamics in polymeric materials after aged under ac electric field using the pulsed electroacoustic (PEA) technique is reported. The emphasis is placed on charge decay. The charge dynamics of the ac aged additive free low density polyethylene (LDPE) samples under dc bias differ from the sample without ac ageing, indicating changes brought in by ac ageing. It is believed that a slow decay rate of charge in the ac aged sample is related to the formation of deep traps in the material. However, chemical analysis by infrared spectroscope (FTIR) and Raman microscope reveals no significant chemical changes taken place in the bulk of the material after ac ageing. Further experiments on irradiated LDPE have revealed a similar behaviour, i.e. the charge decay is slower in irradiated samples than that of fresh sample. The findings presented clearly indicate that space charge measurement can be used as a diagnostic tool to monitor ageing in polymeric materials.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.141-144
• /
• 2003

Proton conducting polymeric gels as the electrolytes of electrochemical capacitors have been prepared by two different methods: 1) swelling a polymethacrylate-based polymer matrix in aqueous solutions of inorganic and organic acids, and 2) polymerizing complexes of anhydrous acids and prepolymers with organic plasticizer. The FT-IR spectra strongly suggest that the carbonyl groups in the polymer matrix interact with protons from the doped acids. High ionic (proton) conductivity in the range of $6\times10^{-4}-4\times10^{-2}\;S\;cm^{-1}$ was obtained at room temperature for the aqueous gels. The non-aqueous polymer complexes showed rather low ionic conductivity, but it was about $10^{-3}\;S\;cm^{-1}\;at\;70^{\circ}C$ for the $H_3PO_4$ doped polymer electrolyte. The mechanisms of ion (proton) conduction in the polymeric systems are discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.220-224
• /
• 2005

The technology trend of Flat Panel Display (FPD) equipments have been demanded that there are compact and multi-function. Therefore, nano/micro scale patterned on polymeric materials of Back Light Unit (BLU) in Liquid Crystal Display (LCD) that has been investigated. This paper describes a series of Horizontal Type Micro Tensile Tester that were carried out to investigate the load strain distance performance of typical polymeric material sheets. The polymeric materials film that micro size shaped specimens for tensile test are used by Cold-Isostatic-Press (CIP). Test equipment is Horizontal type Micro Tensile Tester that is presented to measure the micro scale mechanical property of thin film for FPD. This paper presents which easy testing tools measure for micro patterned on polyethylene (PET) specimens.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.6-10
• /
• 2003

In our country, the housing materials of polymeric outdoor insulators have mainly been used EPDM or silicone rubber. EPDM housing materials had been widely used in the field for the first time. The reason why silicone has the high cost of production. But recently, most of the manufacturers that newly developed polymeric insulators make its choice of silicone housing. EPDM showed a good resistance to tracking. We compared the various characteristics for EPDM and silicone insulators that have similar type and design. Silicone insulators have more performance in flashover voltage test and leakage current measurement because of a good water repellent than EPDM ones. Also, the property of EPDM compared with silicone insulators greatly decreased after aging test in combined acceleration ageing facilities for 1000 hours.

• Journal of Biomedical Engineering Research
• /
• v.29 no.4
• /
• pp.255-266
• /
• 2008

In tissue engineering, scaffolds play an important role in the growth of cells to 3-D organs or tissues. For the success of tissue engineering, they should be mimicked to meet the requirements of natural extracellular matrix (ECM) in the body, such as mechanical properties, adhesiveness, porosity, biodegradability, and growth factor release, etc. Contrary to other materials, polymeric materials are adequate to engineer scaffolds for tissue engineering because controlling the structure and the ratio of components and designing various shapes and size are possible. In this review, the importance, major characteristics, processes, and recent examples of polymeric scaffolds for tissue engineering applications are discussed.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.3
• /
• pp.25-28
• /
• 2003

Radiation technology is an effective way for regulating polymeric materials to physicochemical and mechanical properties. New polymeric hydrogels based on vinyl ethers have been synthesized by the $\gamma$-initiated polymerization method. In this paper, we have studied the effect of radiation on mechanical and electrochemical properties of new rubber-like polymeric composite materials based on polyvinylether of ethyleneglycol (PVEEG).

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.161-161
• /
• 2006

New polymeric and oligomeric OTFT materials containing fused aromatics such as anthracene and naphthalene have been designed, synthesized and characterized. The new OTFT materials were prepared by palladium-catalyzed Suzuki cross-coupling reaction. The obtained materials were characterized by various spectroscopic methods such as UV-vis, PL, cyclovoltametry, and XRD. The obtained OTFT materials containing fused aromatics showed high thermal stability above $350^{\circ}C$ In OTFT devices using new materials, high charge carrier mobility and on/off ratio were observed.