• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1220-1223
• /
• 2003

The UV nanoimprint technology uses the UV light as the energy source. Because the imprint process is carried out in room temperature and low pressure, this technology has its own merits compared to the thermal nanoimprint. However, in UV nanoimprint technology, a resin which has low viscosity is essential for the improvement of accuracy. In this research, a resin (named as IMS01) which has relatively low viscosity was developed. And a measurement system was developed in order to measure the degree of cure of the resin. The measurement system which is composed of FT-IR, UV light source and optical guide can measure the degree of cure in real time. From the experimental results, it was found that the IMS01 is cured more rapidly than existing resin (PAK01).

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.127-133
• /
• 2006

Rapid prototyping technologies have been widely used to reduce the development cost of new products. Manufacturing industries are nowadays characterized by the flexibility and complexity of products. This to due to the rapid development of manufacturing technology and diverse needs of customers. In this paper, the best homing out and casting condition for getting casting product of resin pattern(photopolymer) have been examined experimentally. In generally, the burning out and casting conditions have effect on the casting products. Using the direct casting. we directly Producted the Jewelry. And in this paper, we used only gypsum. Many study of casting for resin have been used to dental investment. A dental investment is good for resin casting. but dental investment is too hard and not useful on the jewelry casting. Therefore we need to find the way of resin casting by gypsum.

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.8-13
• /
• 2005

A novel silicon-containing epoxy resin, the diglycidylether of bisphenol A-silicon (DGEBA-Si), was synthesized and characterized. The properties of the DGEBA-Si epoxy resin cured with 4,4-diaminodiphenyl methane (DDM), including its cure behavior, glass transition temperature, thermal stability, and mechanical strength were investigated. The char yield of the DGEBA-Si/DDM system was higher than that of a commercial DGEBA/DDM system, indicating that the DGEBA-Si epoxy resin showed good flame-retardance. The cured DGEBA-Si/DDM specimens possessed lower glass transition temperatures and higher mechanical properties than DGEBA/DDM specimens. These features were attributed to the introduction of siloxane groups into the main chain of the epoxy resin, which resulted in the improved flexibility of the cured DGEBA-Si/DDM system.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.4
• /
• pp.376-379
• /
• 1991

Pyrazolone group containing resin was tested as an acyl carrier in solid phase peptide synthesis. Several kinds of dipeptide derivatives were prepared by aminolysis reactions of Boc-amino acid-pyrazolone resin active ester with various carboxyl protected amino acid derivatives. It was found that the rates of aminolysis reactions were largely dependent on the bulkiness of the amino acid side chains, the carboxyl protecting groups, and the swelling property of the resin. All the dipeptide derivatives were obtained in high yield in 20-30 minutes, and the pyrazolone resin could be reused repeatedly in peptide synthesis without any change of its reactivity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.1023-1028
• /
• 2001

This study was conducted to develop a procedural method to produce a high strength polymer concrete using polyester resin to experimentally examine the stress block properties of the high strength polymer concrete. C-shaped specimens were Produced and test to compute parameter of the stress block. They were $k_{1}$ : 0.73 and $\gamma$ : 0.845, respectively. $k_{1}$ is the ratio of the depth of the maximum compressive strength of the beam

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.141-146
• /
• 2001

Permeable polymer concrete has a lot of internal voids, which has more excellent performance in permeability and durability than asphalt and cement concrete. Therefore, in this paper, influences of grading distribution of aggregates on the permeable polymer concrete are presented using polyester resin as binders. According to test results, it shows that compressive strength and unit weight increase with continuous grading distribution and increase of binder content, while void and permeability coefficient shows decline tendency

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.111-116
• /
• 2002

Permeable polymer concrete has a lot of internal voids, which has more excellent performance in permeability and durability than asphalt and cement concrete. Therefore, in this paper, influences of grading distribution of aggregates on the permeable polymer concrete are presented using polyester resin as binders. According to test results, it shows that compressive strength and unit weight increase with continuous grading distribution and increase of binder content, while void and permeability coefficient shows decline tendency.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.261-266
• /
• 1993

This study was performed to evaluate the flexural behavior of polymer concrete sandwich panels which was made of unsaturated polymer resin. Bending tests under 4point loading was conducted for the 8 type of sandwich panel with different core and facing thickness. Results show that Load-Deflection, shearing force- shear strain, moment strength - strain relationships were effected by core and facing thickness.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.4
• /
• pp.124-129
• /
• 2000

The objective of this study is to develop a polymer mortar floor members for wine housing with high strength and durability using unsaturated polyester resin to complement defects of conventional cement concrete. Physical and mechanical properties of the polymer mortar floor members for swine housing are also investigated. Specimens with different panel thickness and FRP reinforcement are prepared, tested, and analyzed with respect to structural behaviors. Cracking moment is mostly affected by the thickness and reinforced FRP. Data of the study can be applied to the designing and planning of floor members for swine housing.

• Macromolecular Research
• /
• v.10 no.4
• /
• pp.236-239
• /
• 2002

Centrifugation is a method to create functionally graded materials (FGM) with a thermosetting matrix. In this study the movement of short carbon fibers in an epoxy resin during the centrifugation process was modeled to determine the fiber distribution in the final product. For this purpose a form factor K was introduced to modify a set of equations that was previously shown to be valid for the motion of spheres. It was shown that the results of the simulation were in good agreement with the experimental data, when an empirical K factor of four was chosen.