• Composites Research
• /
• 제34권1호
• /
• pp.63-69
• /
• 2021

일체형 방열 및 기체 차단 재료 개발을 위하여 신규 고분자를 합성하고 판상형 육방정 질화 붕소(hBN) 필러를 포함하는 복합소재를 제조하였다. 복합소재는 필러의 크기 및 함량에 따라 열전도도 및 산소투과도 조절이 가능하였다. 복합소재는 최대 28.0 W·m-1·K-1의 높은 열전도도를 지녔으며 필러 미포함 샘플 대비 산소투과도는 62% 감소하였다. 열전도도 및 기체투과도 실험 측정값과 모델 예측값 비교를 통해 복합소재 내 필러의 종횡비를 계산하였다. 이러한 결과를 토대로 높은 열전도도 및 낮은 기체투과도는 필러 간 효과적인 네트워크 형성 때문이며 이는 복합소재 제조 시 전단 응력 극대화가 가능한 신규 수지의 특성으로부터 유래된것으로 사료된다. 또한, 열전도도로부터 계산된 필러 종횡비와 산소 투과도로부터 계산된 필러 종횡비 값이 서로 다름을 확인하였고 이에 관련하여 복합소재에서 열 전달 및 기체 투과 메커니즘에 대하여 고찰하였다. 본 연구에서 개발된 높은 열전도도 및 낮은 산소투과도를 갖는 고분자 복합소재는 전자 제품의 일체형 방열 및 산화 방지 재료로 사용 될 수 있다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권4호
• /
• pp.241-246
• /
• 1999

In this study, the piezoelectric ceramics PZT powders were synthesized by Wet-Dry combination method. And the flexible 1-3-0 type composites were favricated with piezoceramic PZT and Eccogel polymer matrix embedded 3rd phase. Dielectric constant of 1-3-0 type composites was lower than that of single phase PZT ceramics. Thickness mode coupling factor $k_t$ which was comparable with single phase PZT ceramics, and Mechanical Quality factor $Q_m$ were about 0.65 and 6 respectively. These composites are considered as a good candidates for broad-band type transducer applications. The acoustic impedance for 1-3-0 type composites was lower than that of single phase PZT ceramics. Therefore, these composites would be better used for hydrophone applications.

• 한국재료학회지
• /
• 제3권3호
• /
• pp.292-299
• /
• 1993

본 연구에서는 탄소/탄소복합재료의 마모특성에 대한 탄소섬유 길이의 영향을 고찰하였다. 매트릭스 precursor로 레졸형의 페놀수지와 강화재로 표면처리를 하지않은 PAN계 단섬유형 탄소섬유를 사용하여 액상함침법으로 1회의 고온열처리 공정과 4회의 탄화공정을 통하여 탄소/탄소복합재료를 제조하였다. Disk-on-disk형의 마모시험기를 통하여 상대 마찰재로 AISI 304 stainliss steel을 사용하여 0.6MPa(61 ${\times}{10^3}$Kg/$m^2$)의 압력과 0.71m/sec의 미끄러짐 속도하에서 측정된 탄소/탄소복합재료의 마찰계수는 0.2-0.3이었다. 마찰계수에 대한 섬유의 길이의 영향은 크게 나타나지 않았지만, 마모 속도는 섬유의 길이가 증가함에 따라 증가하는 경향이 나타났다. 본 실헙 결과를 섬유 강화 플라스틱의 마모 모델을 적용하여 고찰하여 본 결과, 섬유의 길이가 증가함에 따라 탄소/탄소복합재료의 마모 속도가 증가되는 경향은 생성된느 마모조각의 크기가 커기기 때문에 나타난 현상으로 판단되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.804-806
• /
• 1998

In this study, piezoelectric composites with 1-3-0 connectivity have been studied. A Piezoelectric ceramic PZT Prepared by Wet-Dry Combination method is used as a filler in mixture of Eccogel polymer matrix and third Phase. The density and stiffness of 1-3-0 type composites were decreased with increasing the third phase.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.151-154
• /
• 2004

Despite of the excellent properties of carbon nanofiber, The properties of carbon nanofiber filled polymer composites were not increased largely. The reason is that it is still difficult to ensure the uniform dispersion of carbon nanofiber in a polymer matrix. In this study, For improvement properties of carbon nanofiber filled epoxy composites, the effect of dispersion was investigated. The compounds were prepared by two methods, solution blending and mechanical mixing. Mixing of solution blending method was used using ultrasonic. Dispersion of carbon nanofiber was observed by optical microscope and scanning electron microscope (SEM). UV adsorption and turbidity measured by UV spectrometer was used for the comparison of dispersion of carbon nanofiber.

• Steel and Composite Structures
• /
• 제25권1호
• /
• pp.93-104
• /
• 2017

In the present work, the effect of hygrothermal aging on the glass fibre and epoxy matrix interface has been investigated by destructive and non-destructive techniques. The glass fiber reinforced polymer (GFRP) composite laminates were prepared using Vacuum Assisted Resin Infusion Molding (VARIM) technique and the specimens were immersed in simulated seawater, followed by quantitative measurement. Besides this, the tensile tests of GFRP specimens revealed a general decrease in the properties with increasing aging time. Also, exposed specimens were characterized by a non-destructive ultrasonic guided Lamb wave propagation technique. The experimental results demonstrate a correlation between the drop in ultrasonic voltage amplitude and fall in tensile strength with increasing time of immersion. Hence, the comparison of the transmitted guided wave signal of healthy vis-a-vis specimens subjected to different extents of hygrothermal aging facilitated performance evaluation of GFRP composites.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.135-138
• /
• 2004

Conventional piezoelectric lead-zirconate-titanate (PZT) senor has high sensitivity, but it is very brittle. Recently polymer films such as polyvinylidene fluoride (PVDF) and poly(vinylidene fluoride­trifluoroethylene) (P(VDF-TrFE)) copolymer have been used as a sensor. The advantages of polymer sensor are the flexibility and mechanical toughness. Simple process and possible several shapes are also additional advantages. Polymer sensor can be directly embedded in a structure. In this study, nondestructive damage sensitivity of single basalt fiber/epoxy composites was investigated with sensor type and thermal damage using AE and oscilloscope. And AE waveform for epoxy matrix with various damage types was compared to each other. The damage sensitivity of two polymer sensors was rather lower than that of PZT sensor. The damage sensitivity of PVDF sensor did not decrease until thermal damage temperature at $80^{\circ}C$ and they decreased significantly at $110^{\circ}C$ However, the damage sensitivity of P(VDF-TrFE) sensor at $110^{\circ}C$ was almost same in no damage sensor. For both top and side impacts, the difference in arrival time increased with increasing internal and surface damage density of epoxy matrix.

• 공업화학
• /
• 제16권1호
• /
• pp.117-122
• /
• 2005

가시광선 중합형의 치아수복용 고분자 복합체(polymeric dental restorative composites, PDRC)에 있어서 여러 종류의 3급 아민계 광증감제가 PDRC의 치과적 물성에 미치는 영향을 기계적 물성과 심미적 특성을 분석한 후 고찰하였다. PDRC 제조에 사용한 barium silicate 필러는 아크릴계 resin matrix와의 혼화성 증가를 위해 표면을 소수성으로 처리하여 사용하였다. 광중합에 필요한 광개시제로는 resin matrix를 기준으로 camphorquinone을 0.5 wt%로 하여 사용하였다. 그 결과, 제조된 PDRC의 기계적 물성과 심미적 특성은 사용한 광증감제의 함량보다는 화학적 구조에의 의존성이 더 큼을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제28권10호
• /
• pp.1534-1540
• /
• 2004

This study aims to obtain fundamental understandings involving the manufacturing processes of nano-composites with chemically surface-modified multi-walled carbon nanotubes(MWCNTs), and explore the role of functionalized MWCNTs in the epoxy/MWCNT composites. For this purpose, MWCNTs were purified by the thermo-chemical oxidation process, and incorporated into an epoxy matrix by in situ polymerization process, the surface of MWCNTs were functionalized with carboxyl functions which were demonstrated by an infrared spectroscopy. The mechanical properties of epoxy/MWCNT nano-composites were measured to investigate the role of a chemically functionalized carbon nanotubes. To improve the dispersion quality of MWCNTs in the epoxy matrix, methanol and acetone were exploited as dispersion media with sonification. The epoxy/MWCNT nano-composites with 1 or 2 wt.％ addition of functionalized carbon nanotubes show an improved tensile strength and wear resistance in comparison with pure epoxy, which shows the mechanical load transfer improves through chemical bonds between epoxy and functionalized MWCNTs. The tensile strength with 7 wt.％ functionalized MWCNTs increases by 28％ and the wear resistance is dramatically improved by 100 times.

• Carbon letters
• /
• 제25권
• /
• pp.43-49
• /
• 2018

This study suggests the novel thermoplastic toughening agent, which can be applied in the monomer forms without increasing the viscosity of the epoxy resin and polymerized during the resin curing. The diazide (p-BAB) and dialkyne (SPB) compounds are synthesized and mixed with the epoxy resin and the carbon fiber reinforced epoxy composites are prepared using vacuum infusion process (VIP). Then, flexural and drop weight tests are performed to evaluate the improvement in the toughness of the prepared composites to investigate the potential of the novel toughening agent. When 10 phr of p-BAB and SPB is added, the flexural properties are improved, maintaining the modulus as well as the toughness is improved. Even with a small amount of polytriazolesulfone polymerized, due to the filtering effect of the solid SPB by the layered carbon fabrics during the VIP, the toughening and strengthening effect were observed from the novel toughening agent, which could be added in monomer forms, p-BAB and SPB. This suggests that the novel toughening agent has a potential to be used for the composites prepared from viscosity sensitive process, such as resin transfer molding and VIP.