• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.53-55
• /
• 2013

Nitrite-Type hydrocalumite (calumite) is a material that can provied a self-corrosion inhibition function to the reinforce concrete. In this study, bisphnol A·F type epoxy-midified mortars without hardner contaning calumite is prepared with various polimer-binder ratios, calumite contents and tow types of curing condition, and tested for flexural and compressive strength tensile strength and corrosion-inhibition. As a result, in the case of wet/dry curing condition, strengths of bisphnol A·F type epoxy-modified mortars without hardener contaning calumite is inclined to decrease with increasing of polymer-binder ratio and calumite content. However, dry cured specimens are slightly improved by using bisphnol A·F type epoxy resin. Finally, regardless of polymer-binder ratios and calumite contents, corrosion-inhibition of bisphnol A·F type epoxy-modified mortars without hardener containing calumite is superior than that of unmodified mortar.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.162-163
• /
• 2019

The purpose of this study is to evaluate the adhesion in flexure of SBR-modified mortar adding Fly Ash(FA). From the test results, the adhesion in flexure is seriously affected by polymer-binder ratios and adding content of FA. The maximum adhesion in flexure of SBR- modified mortar is about 1.46 times, the plain cement mortar. It is apparent that the adhesion in flexure of SBR-modified mortars by polymer-binder ratios is much more improved than that by adding contents of AF.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.147-152
• /
• 2001

The purpose of this study is to ascertain the strength properties of water-permeable polymer concretes with SBR latex and redispersible polymer powder. The water-permeable polymer concretes using SBR latex and redispersible polymer powder with water-binder ratio of 29%, polymer-cement ratios of 0, 5, 10, 15 and 20% are prepared, and tested for compressive strength, tensile strength, flexural strength, water permeability. From the test results, improvements in the strength properties of the water-permeable polymer concretes due to the addition of the SBR latex and redispersible polymer powder are discussed.

• Macromolecular Research
• /
• 제15권3호
• /
• pp.225-233
• /
• 2007

To improve the poor mechanical and low-temperature properties of glycidyl azide polymer (GAP)-based propellants, the addition of binders was investigated using GAP and flexible polymer backbone-structural polycaprolactone (PCP) at various weight(wt) ratios, and varying the ratio of Desmodur N-100 pluriisocyanate (N-100) to isophorone diisocyanate (IPDI). Using Gee's theory, the solubility parameter of the PCP network was determined, in order to elucidate the physical and chemical interaction between GAP and PCP. The structure of the binder networks was characterized by measuring the cross-link densities and molecular weights between cross-links ($M_c$) obtained by a swelling experiment using Flory-Rhener theory. The thermal and mechanical properties of the segmented block copolyurethane (GAP-b-PCP) binders prepared by the incorporation of PCP into the binder recipes were investigated, along with the effect of the different curatives ratios.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권1호
• /
• pp.85-92
• /
• 2021

본 연구는 액상폴리머인 에폭시수지를 이용한 고내구성 폴리머 시멘트계 재료를 개발할 목적으로 고로슬래그미분말 치환율을 20%로 고정하고, 4종류의 알칼리 활성화제를 이용한 경화제 무첨가 에폭시수지 혼입 폴리머 시멘트 모르타르를 제작하여, 강도 특성, 에폭시수지 경화도, 흡수율, 내황산성, 중성화 및 염화물이온 침투저항성을 검토한 것이다. 그 결과, 알칼리 자극제의 종류에 관계없이, 고로슬래그 미분말 20%를 사용한 경화제 무첨가 EMM의 압축강도는 폴리머 결합재비 10%에서 최댓값을 나타냈으며, 폴리머 결합재비 20%에서는 에폭시수지의 경화도 감소와 함께 압축강도 또한 감소하는 것으로 나타냈다. 휨강도는 압축강도와 마찬가지로 수산화칼슘을 첨가한 것이 가장 우수하게 나타났으며, 폴리머 결합재비의 증가와 함께 증가하였으며, 모두 9.0 MPa 이상의 휨강도를 발현하였다. 알칼리 자극제의 종류에 관계없이, 경화제 무첨가 EMM의 방수성, 중성화 및 염화물이온 침투저항성은 폴리머 결합재비의 증가와 함께 현저히 개선되었으며, 4종류의 알칼리 자극제 가운데 수산화칼슘을 첨가한 모르타르가 가장 우수한 것으로 나타났다. 한편, 알칼리 자극제의 종류에 관계없이, 경화제 무첨가 EMM의 내황산성은 폴리머 결합재비의 증가와 함께 떨어졌는데, 이것은 폴리머 결합재비의 증가에 따른 에폭시수지의 미경화 에폭시수지의 증가에 기인한 것으로 판단된다. 4가지 알칼리 자극제의 종류에 대하여 물성 및 내구성을 비교 검토한 결과, 수산화칼슘을 첨가한 것이 가장 우수한 것으로 확인되었다.

• 한국자기학회지
• /
• 제24권3호
• /
• pp.86-89
• /
• 2014

이방성 희토류 본드자석은 자성분말과 유기 바인더로 구성되며 본드자석 내에서 유기 바인더는 분말의 배향을 유리하게 하는 역할을 한다. 유기 바인더는 고분자 수지, 활제, 경화제, 커플링제 등으로 구성되며 자성분말에 적합한 유기 바인더를 제조하기 위해 본 연구에서는 다양한 성분을 선정하여 유기 바인더를 제조하였고 구성비 및 첨가량을 조절하여 이를 본드자석에 적용하였다. 특성평가를 통해 자기특성 및 기계적 특성을 측정하였고 이로부터 본드자석에 적합한 유기 바인더의 성분 및 비율을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.288-289
• /
• 2014

The purpose of this research is to examine strength properties of epoxy-modified mortar with expansive and swelling agent contents. The polymer-modified mortars (PMMs) using epoxy resin are prepared with various polymer-binder ratios, expansive and swelling agent contents. The PMMs using epoxy resin are tested for compressive, flexural and tensile strengths. As a result, the strength properties of the PMMs using epoxy resin are depending on the polymer-binder ratio rather than expansive and swelling agent content, and are remarkably improved over unmodified mortar (UMM).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.21-22
• /
• 2014

The purpose of this study is to ascertain strengths and hardening rate of epoxy-modified mortar with wood-tar contents. The polymer-modified mortars (PMMs) using epoxy resin with wood-tar are prepared with various polymer-binder ratios of 1, 3, 5% and wood-tar contents of 0, 5, 10, 15 and 20%. The PMMs using epoxy resin are tested for compressive, flexural and tensile strengths and hardening rate of epoxy resin. As a result, the strengths and hardening rate under polymer-binder ratio 1% and wood-tar content of 5% are more excellent than those of other specimens.

• 대한금속재료학회지
• /
• 제49권5호
• /
• pp.362-366
• /
• 2011

Aluminosilicate inorganic polymer binder has been studied as an alternative to ordinary Portland cement due to its higher physical properties, chemical resistance and thermal resistance. This study has been carried out in an attempt to understand the hardening characteristics of aluminosilicate binder by varying the content of calcium. Samples with four different ratios of Al, Si, and Ca were synthesized in this study with the Al:Si:Ca mol ratio being 1.00:1.85~1.98:0.29~2.12. Furthermore, an alkali silicate solution was prepared with the sodium hydroxide (NaOH) and sodium silicate (NaSi). The hardening characteristics of the specimens were analyzed using XRD, SEM, and TG/DTA. In addition, compressive strength and sintering time of specimens were measured as a function of calcium content. The results showed that the specimen containing 2.12 mol% calcium offered the highest compressive strength. However, the compressive strength of the specimen containing 0.26 mol% calcium was lower relative to the other specimens. The results displayed a distinct tendency that as more calcium was added to the inorganic polymer, setting time became shorter. When calcium was added to the inorganic polymer structure, a second phase was not formed, indicating that the addition of calcium does not affect the crystalline structure.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.256-263
• /
• 2018

The binder polymers for digital textile printing(DTP) pigment inks were prepared using miniemulsion polymerization with various monomer compositions to study effects of monomer compositions on particle size distribution, average molecular weight, Tg, and color strength and rubbing fastness of the dyed fabrics with the prepared binder based pigment ink. The monomers used were MMA(Methyl methacrylate), BA(Butyl acrylate), MAA(Methacrylic acid), NMA(N-methylol acrylamide), NEA(N-ethylol acrylamide) and the ratios of the monomers were changed. The particle size was the smallest with 136nm when the MMA to BA weight ratio was 4:16 and the largest with 290nm when the MMA, BA, MAA, NEA ratio was 2.5:17:0.25:0.25. However, the glass transition temperature was lowest with $-41.90^{\circ}C$ and the color strength and rubbing fastness of the resulting sample were the best when the MMA, BA, MAA, NEA ratio was used. This suggested that the introduction of the NEA monomer to the binder polymer for the pigment ink could be an efficient way to enhance the rubbing fastness of the DTP pigment inks present.