• 폴리머
• /
• 제38권2호
• /
• pp.113-128
• /
• 2014

Tissue engineering and regenerative medicine strategies could offer new hope for patients with serious tissue injuries or end-stage organ failure. Scientists are now applying the principles of cell transplantation, material science, and engineering to create biological substitutes that can restore and maintain normal function in diseased or injured tissues/organs. Specifically, creation of engineered tissue construct requires a polymeric biomaterial scaffold that serves as a cell carrier, which would provide structural support until native tissue forms in vivo. Even though the requirements for scaffolds may be different depending on the target applications, a general function of scaffolds that need to be fulfilled is biodegradability, biological and mechanical properties, and temporal structural integrity. The scaffold's internal architecture should also enhance the permeability of nutrients and neovascularization. In addition, the stem cell field is advancing, and new discoveries in tissue engineering and regenerative medicine will lead to new therapeutic strategies. Although use of stem cells is still in the research phase, some therapies arising from tissue engineering endeavors that make use of autologous adult cells have already entered the clinic. This review discusses these tissue engineering and regenerative medicine strategies for various tissues and organs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.547-548
• /
• 2006

This study focuses on a determination of amount of Pt in the Pt/C for catalysts of polymer electrolyte membrane fuel cells (PEMFC). PEMFC offer low weight and high power density and being considered fur automotive and stationary power applications. The PEMFC behavior is quite complex is influenced by several factors, including catalysts and structure of electrode and membrane type. Catalyst of electrode is important factor for PEMFC. One of the obstacles preventing polymer electrolyte membrane fuel cells from commercialization is the high cost of noble metals to be used as catalyst, such as platinum. To effectively use these metals, they have to be will dispersed to small particles on conductive carbon supports. The optimal amount of Pt in Pt/C was investigated by using polarization curves in single cell with $H_2/O_2$ operation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.31-34
• /
• 2003

Sandwich panel is composed of the facing sheets which support the external load, the cellular core with the low thermal conductivity and the adhesive agent to bond them. The cellular core was produced by binding lightweight cellular aggregates with cement and two types of acrylic base St/BA emulsion were added with a view to improving the workability ion due to high absorption of light weight aggregate and to develope more strength, respectively. This investigation is to comprehend the effect of the addition of two types of St/BA on thermal conductivity, calorific value and exhaustion content of noxious gas in addition re compressive and flexural strength. Flexural strength of the specimen made with St/BA-2 ranged 20kgf/cm2 to 25kgf/cm2 and was about 50% to 100% as high as that of the non-fiber specimen. Thermal conductivity was recorded from 2.0 to 3.0 kcal/mh$^{\circ}C$ and calorific value of St/BA modified specimen was much lower than that of commercial sandwich panel core of EPS and urethane. Careful caution has to be taken because generation of noxious gas such as CO, NO and SO2 tend to increase with addition of polymer cement ratio.

• KSBB Journal
• /
• 제6권4호
• /
• pp.403-406
• /
• 1991

방사선 중합체로 고정화한 Rhizopus oryzae의 유산생성 방사선 공중합 고분자로 Rhizopus oryzae를 흡착 고정화하였다. 이 고정화 균체는 고정화하지 않은 생균체보다 반응시간도 짧았으며 제품수율도 아주 높았다. 즉 글루코스를 주 탄소원으로 한 경우 고정화 하지 않은 균체 배양은 반응후 96시간에 탄소원을 거의 소비하고 유산생성 수율이 약60%에 다다랐으나 고정화 균체는 반응후 48시간 안에 수율이 약 88%이상으로 되었다. 또 중합체 중 모노머의 비율이 5-10%의 것이 고정화에 좋은 결과를 보였다.

• 한국입자에어로졸학회지
• /
• 제11권3호
• /
• pp.87-92
• /
• 2015

MCM-41 (Mobil Composition of Matter) and SBA-15 (Santa Barbara Amorphous) were used as a supported catalyst for ethylene polymerization due to their combination of large surface area and wide range of pore size distribution. The morphology of supports was used to control the morphology of the resulting polymer. Different molar ratios of Al/Ti were used for ethylene polymerization at $60^{\circ}C$ under atmospheric pressure. The effect of different mass ratios of MCM-41/SBA-15 and 1-hexene concentration on polymerization activity and polymer properties was investigated. The catalytic activity and the crystallinity reached the highest value at Al/Ti of 480. Upon incorporation of MCM-41 and SBA-15 into $MgCl_2/TiCl_4$ catalyst, the molecular weight and crystallinity of polyethylene were enhanced. The obtained polyethylene showed melting temperature between 130 and $135^{\circ}C$. The polyethylene with replication structure of support and bimodal MWD was expected.

• 한국재료학회지
• /
• 제29권6호
• /
• pp.371-377
• /
• 2019

A flexible piezoelectric energy harvester(f-PEH) that converts tiny mechanical and vibrational energy resources into electric signals without any restraints is drawing attention as a self-powered source to operate flexible electronic systems. In particular, the nanocomposites-based f-PEHs fabricated by a simple and low-cost spin-coating method show a mechanically stable and high output performance compared to only piezoelectric polymers or perovskite thin films. Here, the non-piezoelectric polymer matrix of the nanocomposite-based f-PEH is replaced by a P(VDF-TrFE) piezoelectric polymer to improve the output performance generated from the f-PEH. The piezoelectric hybrid nanocomposite is produced by distributing the perovskite PZT nanoparticles inside the piezoelectric elastomer; subsequently, the piezoelectric hybrid material is spin-coated onto a thin metal substrate to achieve a nanocomposite-based f-PEH. A fabricated energy device after a two-step poling process shows a maximum output voltage of 9.4 V and a current of 160 nA under repeated mechanical bending. Finite element analysis(FEA) simulation results support the experimental results.

• Toxicological Research
• /
• 제23권1호
• /
• pp.65-72
• /
• 2007

This study was conducted to obtain information of the oral dose acute toxicity of PGB-2, a novel polyglucosamine polymer produced from Citrobacter sp. BL-4 (a new strain) in male and female mice. Mortality, body weight changes, clinical signs were monitored during 14 days after single oral dose of test article at dose levels of 2000, 1000, 500, 250 and 125 ml/kg. Gross lesions, organ weight and histopathology of principal organs were examined after necropsy. As the results, we could not find any mortalities, clinical signs, changes in the body weight and gross findings except for white foci in the liver. In addition, no PGB-2-treatment related abnormal changes on the organ weight and histopathology of principle organs were detected except for atypical signs of liver. White liver foci were confirmed as focal infiltration of inflammatory cells. The results suggest that the PGB-2 is relatively safe in mice but the possibility of hepatotoxicity could not be excluded. The $LD_{50}$ and approximate LD in mice after single oral dose of PGB-2 were considered over 2000 mg/kg, respectively. In future, the potential hepatotoxicity of PGB-2 should be evaluated through the repeat dose toxicity test prior to develop as a new agent.

• 농약과학회지
• /
• 제10권1호
• /
• pp.1-6
• /
• 2006

고체상 지지체인 4-클로로-3-나이트로벤조페논 옥심 resin 5를 이용하여 카르복스아닐라이드 유도체를 고체상에서 합성할 수 있는 방법을 개발하였다. 4-클로로-3-나이트로벤조페논 resin 6과 하이드록실아민 염산염을 축합반응하여 옥심 resin 5를 얻었다. 옥심 resin 5에 각각 다이옥신 및 옥사티인 유도체 7a-d를 결합하여 상응하는 고체상에 결합된 다이옥신 및 옥사티인 화합물 9a-d를 얻었다. 이 고체상 resin 9a-d를 초산 존재 하에서 아닐린으로 각각 처리하여 상응하는 다이옥신 및 옥사티인 카르복스아닐라이드 유도체 10a-d(수율 5%-정량적)를 합성하였다.

• 접착 및 계면
• /
• 제18권3호
• /
• pp.118-126
• /
• 2017

천연섬유강화 복합재료에서 여러 가지 섬유표면 개질을 통해서 천연섬유와 고분자매트릭스 사이에 계면접착과 복합재료 특성을 향상시키고자 하는 많은 연구 노력이 있었다. 본 연구에서는 폐양모섬유 강화 폴리프로필렌 매트릭스 복합재료를 압축성형공정 방법으로 제조하였고, 그들의 기계적 특성 및 충격 특성을 분석하였다. 그 결과, 폐양모/폴리프로필렌 복합재료의 인장 및 굴곡 특성 그리고 충격강도는 수산화나트륨(NaOH)을 이용한 알칼리처리와 3-glycidylpropylsilane(GPS)을 이용한 실란처리와 같은 처리매체에 크게 의존하였다. 실란처리를 한 폐양모섬유를 포함한 복합재료는 알칼리처리를 한 폐양모섬유를 포함한 것보다 더 우수한 기계적 특성과 충격저항성을 나타내었다. 복합재료 파단면은 특성 증가가 폐양모섬유와 폴리프로필렌 매트릭스 사이에 계면결합의 향상에 의한 것임을 정성적으로 뒷받침해주었다.

• Macromolecular Research
• /
• 제17권12호
• /
• pp.1032-1038
• /
• 2009

A polypyrrole (PPy)/alumina composite filler prepared via in-situ polymerization of pyrrole on alumina particles was incorporated into $Nafion^{(R)}$ to improve the performance of ionic polymer-metal composite (IPMC) actuators. The IPMCs with the pristine PPy without alumina support did not show bending displacements superior to that of the bare Nafion-based IPMC, except at a high PPy content of 4 wt%. This result was attributed to the low redox efficiency of the PPy alone in the IPMC and may have also been related to the modulus of the IPMC. However, at the optimized filler contents, the cyclic displacement of the IPMCs bearing the PPy/alumina filler was 2.2 times larger than that of the bare Nafion-based IPMC under an applied AC potential of 3 Vat 1 Hz. Even under a low AC potential of 1.5 V at 1 Hz, the displacement of the PPy/alumina-based IPMCs was a viable level of performance for actuator applications and was 2.7 times higher than that of the conventional Nafion-based IPMC. The generated blocking force was also improved with the PPy/aiumina composite filler. The greatly enhanced performance and the low-voltage-operational characteristic of the IPMCs bearing the PPy/alumina filler were attributed to the synergic effects of the neighboring alumina moiety near the PPy moiety involving electrochemical redox reactions.