• 폴리머
• /
• 제36권3호
• /
• pp.302-308
• /
• 2012

본 연구의 목적은 대기압 플라즈마 처리된 평판형 폴리프로필렌(polypropylene, PP) 필름 표면 위에 폴리비닐피롤리돈(poly($N$-vinyl-2-pyrrolidone), PVP)을 그래프트 공중합시키기 위한 최적 조건을 찾는데 있다. 대기압 플라즈마 처리 조건은 RF power 200W, Ar 유속 6 LPM, 처리시간 30초, 처리 후 노출시간은 5분으로 고정하였다. 그래프트 공중합에서는 중합 시간, 중합 온도, 비닐피롤리돈($N$-vinyl-2-pyrrolidone, NVP) 농도의 조건을 각각 달리하여 표면 그래프트도의 변화를 조사하였다. 그 결과, 중합 시간 6시간, 중합 온도 $90^{\circ}C$, NVP 농도 40%에서 가장 높은 그래프트도를 나타내었다. ATR-FTIR, X-ray photoelectron spectroscopy(XPS), SEM 분석을 통해서도 PVP의 도입을 확인할 수 있었다.

• 멤브레인
• /
• 제29권6호
• /
• pp.323-328
• /
• 2019

인류의 에너지 수급은 항상 인간의 삶에 중요한 문제이며, 최근에는 전기 생산 및 공급 문제로 이어지고 있다. 이에 관련하여 본 연구에서는 에너지 저장장치의 일환으로 슈퍼커패시터 용도의 고체 전해질막을 제조하였다. 제조한 전해질막은 poly(vinyl alcohol) (PVA) 주사슬에 poly(oxyethylene methacrylate) (POEM) 곁사슬을 그래프팅하여 사용하였으며, 그래프팅은 자유 라디칼 중합법을 통해 합성하였다. 본 연구에서 사용한 PVA-g-POEM 가지형 공중합체를 슈퍼커패시터 전해질에 적용한 사례는 처음이다. POEM 그래프팅을 통해 PVA가 고유하게 가지고 있던 구조가 변화하였으며, 이를 FT-IR을 통해 분석하였다. 또한, 합성한 공중합체를 이용한 슈퍼커패시터 성능은 cyclic voltammetry (CV), galvanostatic charge/discharge(GCD), ragone plot 등을 통해 분석하였다. 이를 통해 기존에 수계 전해질로 PVA 단일 고분자만 사용하던 분야에 그래프팅 방법이라는 새로운 접근법을 제시하였다.

• 폴리머
• /
• 제31권3호
• /
• pp.239-246
• /
• 2007

[ $Co^{60}\;{\gamma}-ray$ ] 선원에 의한 그래프트 공중합 반응을 통해 설폰화 이온교환 섬유를 합성하였다. 그래프트 공중합 반응의 경우 총 조사선량이 증가할수록 그래프트율이 증가하였으며, 가교제인 divinylbenzene을 첨가하여 공중 합하였을 때 최대 1000%의 그래프트율을 보였다. 또한 이온교환 섬유의 설폰화율이 증가할수록 이온교환용량이 크게 증가하였고 가교제가 첨가된 설폰화 POF-co-St/DVB 이온교환 섬유의 이온교환용량이 5.06 meq/g로 설폰화 POF-co-styrene 이온교환 섬유에서 보다 높게 측정되었으며, 이온교환 섬유의 중금속 이온 흡착량은 섬유의 그래프트율이 증가함에 따라 증가하였다.

• 폴리머
• /
• 제36권2호
• /
• pp.137-144
• /
• 2012

대기압 플라즈마 처리 및 글리시딜 메타크릴레이트(glycidyl methacrylate, GMA) 그래프트 공중합을 통해 폴리에틸렌(polyethylene, PE)의 표면을 개질하였다. 우선 RF-power, 플라즈마 처리시간, Ar의 유량, 처리 시편의 이동속도를 변화시켜 PE의 표면을 플라즈마 처리하고, 처리된 각 시편들의 접촉각 측정과 표면자유에너지 계산을 통하여 최적의 플라즈마 표면처리 조건을 구하였다. 그 결과 최적 표면처리 조건은 RF-power 200W, 플라즈마 처리시간 600 sec, Ar 유량 5 LPM, 처리 시편의 이동속도 20 mm/sec 이었다. 이 조건하에서 처리된 PE 표면에 GMA를 최대한 많이 도입하기 위하여 GMA 농도와 반응온도, 반응시간을 변수로 그래프트 공중합을 수행하였다. 반응전후 시편의 질량차이 분석을 통하여 각 시편들의 그래프트도(grafting degree, GD)를 측정하고, 가장 높은 GD를 얻을 수 있는 그래프트 공중합 반응조건을 결정하였다. 그 결과 GMA 최대 도입 조건은 GMA 농도 20 vol%, 반응온도 $80^{\circ}C$, 반응시간 4 hr 이었다.

• 대한화학회지
• /
• 제6권1호
• /
• pp.64-68
• /
• 1962

The graft polymerization of styrene to polyvinyl alcohol using a photosensitizer(benzophenone) and ultraviolet light was studied. Styrene was grafted onto polyvinyl alcohol up to when polyvinyl alcohol was pre-immersed in water and irradiated by ultraviolet light for 24 hours styrene solution of benzophenone(0.01 molarity). The highest percentage of graft obtained in the grafting which was proceeded in the presence of water added immediately before irradiation was 29%. The grafting was proportional to irradiation time within a certain limit of time, i.e., 24 hours, and presumably was initiated at the surface. After a certain degree of grafting a definite maximum was reached. Graft polymer prepared in this experiment showed high resistance to various solvents.

• Macromolecular Research
• /
• 제11권5호
• /
• pp.347-351
• /
• 2003

The hydrophobic ligand-containing hollow polypropylene (PP) membranes were synthesized by the mutual radiation induced graft copolymerization with glycidylmethacrylate (GMA) onto hollow PP membrane followed by the subsequent functionalization with L-phenylalanine. FT-IR, elemental analysis and UV spectroscopy were utilized to characterize copolymer composition, and degree of grafting, functionalization conversion and ${\gamma}$-globulins adsorption. The degree of grafting on the PP surface increased with the reaction time and total dose of E-beam. In the subsquent functionalization, the amount of L-phenylalanine increased with the increase in the degree of grafting and the degree of conversion was about 30%. The ${\gamma}$-globulins adsorption experiments showed that adsorption capacity had a maximum value at pH 8. The ${\gamma}$-globulins adsorption capacity in the basic pH region was higher than in the acidic pH region.

• 대한화학회지
• /
• 제57권5호
• /
• pp.625-633
• /
• 2013

A type of polycyclotriphosphazene derivative (PCTPD), hexasulfanilic acid polycyclotriphosphazene (HSACP) and HSACP grafting SPEEK, sulfonated poly[2-(petachloropolycyclotriphosphazene-oxy)] etheretherketone (SPPSACPEEK) were synthesized, which were characterized by FTIR and $^{31}P$ NMR. Then three types of composite membranes such as HSACP grafting SPEEK, HSACP blending SPEEK, and nano $Y_2O_3$ doping and HSACP grafting SPEEK, respectively, were continuously prepared by solution-casting method. Comparing to SPEEK membranes with different amount of HSACP grafted or blended, grafting 15 wt% HSACP and doping 10 wt% nano $Y_2O_3$ SPEEK membrane conducted outstanding overall behavior of proton conductivity reaching $3.18 {\times}10^{-2}$ S/cm at $90^{\circ}C$ which was merely junior to SPEEK with 15 wt% HSACP grafted, methanol permeability coefficient getting $9.46{\times}10^{-8}cm^2{\cdot}s^{-1}$, swelling degree of 20.9% and solid residue of 98.98% which was superior to all specimen.

• Macromolecular Research
• /
• 제15권1호
• /
• pp.51-58
• /
• 2007

The approach studied in the present work produced an exfoliated state of clay layers via confinement of the charged nano-sized polystyrene (PS) beads within the gallery of swollen pristine clay. It was demonstrated that adsorption of the polymer nanobeads dramatically promotes expansion of the clay gallery. A comparative study of incorporation was conducted by employing organo-modified clay along with two different colloid polymer systems: electrostatically stabilized PS nanobeads and cationic monomer-grafted PS nanobeads. The mechanism of adsorption of the monomer-grafted polymer beads onto clay via cationic exchange between the alkyl ammonium group of the polymer nanobeads and the interlayer sodium cation of the layered silicate was verified by using several techniques. As distinct from the polymer nanobeads formed using conventional miniemulsion polymerization method, competitive adsorption of stabilizing surfactant molecules was be prevented by grafting the surface functional groups into the polymer chain, thereby supporting the observed effective adsorption of the polymer beads. The presence of surface functional groups that support the establishment of strong polymer-clay interactions was suggested to improve the compatibility of the clay with the polymer matrix and eventually play a crucial role in the performance of the final nanocomposites.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.269-269
• /
• 2006

The molecular structure of poly(2,6-dimethyl-4,4' -phenylene oxide)-g-poly (styrenesulfonic acid) (PPO-g-PSSA) graft copolymer was designed, and synthesized via living radical polymerization. Obtained graft copolymers were transformed into proton exchange membranes for direct methanol fuel cell (DMFC) application. The performance of the membranes was measured in terms of water uptake, proton conductivity, methanol permeability, and thermal stability. Very low methanol permeability and good proton conductivity were observed by adjusting grafting frequency and PSSA block content.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권1호
• /
• pp.83-85
• /
• 2000

The purpose of this study is to evaluate the effect of $HTR^{TM}$ (hard tissue replacement, Bioplant Inc, U.S.A) polymer on short-term healing as a grafting material for alveolar ridge augmentation. A 48-year-old female presented insufficient bone height and width for the placement of implants. $HTR^{TM}$ polymer was used for ridge augmentation. Bone biopsy was harvested 8 months after the ridge augmentation procedure. $HTR^{TM}$ polymer displayed rapid bone regeneration and mature lamellar and trabecular bone redevelopment. Clinical and histologic observation from the treatment of the patient presented suggest that $HTR^{TM}$ polymer seems to be a appropriate material for alveolar ridge augmentation.