• Journal of the Korean Society of Tobacco Science
• /
• v.11 no.1
• /
• pp.19-25
• /
• 1989

Effect of removal time of mulched polyethylene film on the chlorine content of toP soil and on the chlorine absorption by burley tobacco Plants was investigated under the field condition in 1986 and 1987. Treatment consisted of 4 removal times (from 30 to 75 days after transplanting with IS days interval) and control (no removal). The chlorine content of top Boll at 15 days after removal of mulched polyethylene film(MPF) lowered temporarily, and the decrement of chlorine content of top soil was closely related to the sum of rainfalls after removal of MPF. The chlorine was accumulated much in upper leaves when the MPF being removed early, while the chlorine was accumulated much in lower loaves when the MPF being removed late, relatively. However, the removal of MPF had no effect on the chlorine content of whole leaf. The yield decreased with removal of MPF during growing period.

• Plant Resources
• /
• v.5 no.1
• /
• pp.70-73
• /
• 2002

To develop an optimal storage method of root of Angelica acutiloba Radix, which has been grown as major herbal medicine material to be cultivated, root of Angelica acutiloba Radix, was stored for 10 months with different packing materials and sealing methods. The loss in dry weight as influenced by packing materials and sealing methods was the lowest at vacuum packing and followed by complete sealing methods with transparent polyethylene film. The ratio of root rot during the storage period was not significantly different between packing materials but was significantly different between sealing conditions. In conclusion, vacuum packing and complete sealing with polyethylene film appears to be most optimal for storage of Angelica acutiloba Radix.

• Journal of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.379-386
• /
• 1969

Polyethylene maleate (PEM) and epoxy resin cinnamate (BEC) were prepared to investigate their photosensitivity. Various samples coated on glass plate were exposed to light under various conditions and steeped in the same solvent as used for coating, and then the yield of residual film (W/$W_0$) was calculated. The yield (W/$W_0$), which was closely related to the sensitivity of the film, was affected by the degree of polymerization of the film, light source, sensitizers land their concentration. In polymer homologs, the sensitivity depended upon degree of polymerization. Most effective sensitizers for PEM and BEC among those used here were benzanthrone and 2,6-dichloro-4-nitroaniline.

• Journal of Bio-Environment Control
• /
• v.17 no.3
• /
• pp.226-230
• /
• 2008

A comparison was made of the effect of different packaging materials on storability of mixed sprout vegetables (alfalfa, broccoli, cabbage, radish, and red radish) stored at $8^{\circ}C$. They were packaged by several kinds of films that were 50 fm thickness low-density polyethylene film (PE 50), 50 fm thickness polypropylene film (PP 50), $50{\mu}m$ thickness ceramic film (CE 50), $25{\mu}m$ thickness ceramic film (CE 25), $10\sim13{\mu}m$ thickness polyethylene film (wrap), and polyethylene terephthalate box with ventilation hole (box). The fresh weight of mixed sprouts packaged with different materials decreased below to 2% except box packages that decreased around 7% compared with initial weight. The atmospheres that were developed inside the different materials during storage differed significantly. The carbon dioxide and oxygen concentration of packages were kept properly with 5% in CE 25, but the PE 50 and CE 50 treatments showed higher carbon dioxide and lower oxygen concentration. So the off-flavor of mixed sprouts was more severe in the PE 50 and CE 50 treatment. The ethylene concentration of packages showed lowest in box treatment, followed by PP 50, wrap and CE 25 treatment. The overall quality of mixed sprouts was lower in PE 50 and CE 50 than CE 25 treatment after 10 days storage, supposed to be resulted from highest ethylene concentration and lowest oxygen concentration. Conclusionally, the CE 25 film that showed below 1% fresh weight loss, 5% carbon dioxide, 5% oxygen and below 4 ppm ethylene concentration in package may be a proper packaging material for mixed sprout vegetables.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2002.08a
• /
• pp.180.2-180
• /
• 2002

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.135-136
• /
• 2003

알코올 분무, 셀로판지 부착 등의 표면처리가 포장김치의 표면갈변과, pH, 산도, 균수 및 관능적 품질에 미치는 영향을 조사하였다. 실험에 사용된 포장김치는 200 g 들이 플라스틱 용기에 김치를 담은 후 무처리, 70% 알코올로 표면을 1회 분무한 것, 김치표면에 폴리에틸렌필름(두께 0.04 mm)을 부착하여 저장실 (10$\pm$1$^{\circ}C$)에서 21일간 저장하면서 3일 간격으로 조사하였다. 그 결과, 무처리와 알코올을 분무한 경우는 저장 15일째에 pH가 4.0수준에 도달하였으나 김치표면에 polyethylene film을 부착한 경우는 21일째까지도 pH가 4.0 이상을 유지하였다. 산도의 경우도 pH와 동일한 경향을 나타내어 polyethylene film으로 표면처리함으로서 김치의 숙성이 지연되었다. 무처리와 알코올을 처리한 것은 12일째부터 김치표면이 갈변하기 시작하였으며 18일째는 그 갈변정도가 심하였다. 그러나 polyethylene film을 표면에 부착한 경우는 저장 21일째까지도 갈변정토가 미약하였다. 저장기간에 따른 총균수의 변화는 무처리와 알코올을 처리한 경우가 polyethylene film을 부착한 경우에 비하여 증가폭이 컸으나 젖산균수는 반대로 polyethylene film을 부착한 경우가 무처리 또는 알코올을 분무한 경우에 비하여 높아 김치의 품질이 양호하였다. 무처리와 알코올을 분무한 김치의 표면에는 저장 15일 이후에 산막표모 및 곰팡이의 균사체가 번식하는 김치도 발견되었다. 처리별 이미 및 이취의 발생정도를 조사한 결과 무처리와 알코올을 처리한 경우는 저장 15일경에 특히 용기 표면에 위치하는 김치에서 이미와 이취가 있었으나 polyethylene film을 부착한 경우는 이미와 이취가 전혀 나타나지 않았다.채반에 넣고 밀도를 측정한 결과 1.002g/㎤을 나타냈다. 즉 물의 이론밀도인 1g/㎤에 근접한 값을 보여 정확한 밀도 계측이 가능한 것으로 판단되었다. 또한 밀도 계측시스템의 측정 반복간 정밀도를 파악하기 위해 수박 6개를 임으로 선정하여 3반복 측정 시험한 결과, 측정표준편차가 0.001~0.004g/㎤로 해상도보다는 다소 높았으나 대체로 양호한 결과를 나타냈다. 수박 35개를 이용하여 개발 계측시스템과 사람이 직접 부력법으로 밀도를 측정 비교한 결과, 계측시스템에 의해 측정된 수박 밀도가 사람이 측정했을 때 보다 낮게 측정되었다. 수박의 외관인자(무게, 길이, 직경, 체적), 밀도와 당도의 상관관계 구명시험을 위해 원예연구소 시험포장에서 재배된 삼복꿀수박 총 74개를 공시재료로 하였고, 시험은 출수일별로 10~14개씩 수확하여 외관인자, 밀도, 당도를 각각 측정하고, 이들 인자들간의 상관관계를 구명하였다. 외관인자들간에는 높은 상관관계를 보였으나, 외관인자들과 밀도, 외관인자들과 당도, 밀도와 당도와는 매우 낮은 상관관계를 나타냈다. 점성에 영향을 미치는 가장 주요한 조건이라고 생각된다.환원당인 sucrose 함량은 계속 증가하였고 fructose, glucose, sorbitol의 함량(추황의 sorbitol을 제외)은 생장이 촉진됨에 따라 증가하다가 다시 점차적으로 감소하였다. 이러한 결과는 총당과 환원당의 측정결과와 일치한 것으로 나타났다. 결론적으로 배의 성장에 따라 산 함량은 감소하였고 당 함량은 증가하였다.luco-pyranoside, quercetin 7-O- -glucopyranoside, acacetin 7-O-$\beta$-D-glucuronide and apigenin-6-C-$\beta$-D-glucopyranosyl-8-C-$\b

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.127-134
• /
• 2005

The relationships among mechanical properties, rheological properties, and morphology by reactive extrusion based on commingled pckaging film wastes contains polypropylene (PP) pckaging film system [PP/polyethylene (PE)/aluminum (Al)/poly(ethylene terephthalate) (PET)] and Nylon packaging film system[Nylon/PE/linear-low density polyethylene (LLDPE)] were investigated to improve the compatibility and toughness of these wastes using various compatibilizers such as ethylene vinylacetate (EVA), styrene-ethylene/butylene-styrene triblock copolymer (SEBS), styrene-ethylene/butylene-styrene-graft-maleic anhydride copolymer (SEBS-g-MA), polyethylene-graft-maleic anhydride (PE-g-MA), polypropylene-graft-maleic anhydride (PP-g-MA) , polyethylene-graft-acrylic acid (PE-g-AA) and polypropylene-graft-acrylic acid (PP-g-AA). Compared with simple melt blend system, the blends showed improvement of about $50\%$ increase in physical properties when SEBS and EVA were added. However, SEBS-g-MA thermoplastic elastomer which is highly reactive with amine terminal group of nylon, resulted in about $200\%$ increase in impact strength. This compatibilization effect resulted from the increase of interfacial adhesion and the reduction of domain size of dispersed phase in PP/Nylon blend system.

• Fibers and Polymers
• /
• v.6 no.3
• /
• pp.200-205
• /
• 2005

Celite powder surface-modified with cationic surfactant was used to make polyethylene (PE) specialty film that can be contrasted with ordinary film in having high odor storing capacity and long odor lasting period. Mechanical properties of the films were sacrificed as more celite particles were included, whether celite surface was modified or not. The film with CTAS-modified celite showed the best odor storing and lasting properties for five different flavors of odor, three artificial and two natural ones, among the kinds of films developed. Comparisons among the different films are made, together with brief discussion about the reason for differences in odor lasting period and possible application to packaging industry.

• Preventive Nutrition and Food Science
• /
• v.6 no.2
• /
• pp.112-116
• /
• 2001

Oxidized potato starch/polyethylene (PE) cast films were prepared with different percentages of linear low density PE (LLDPE), oxidized potato starch and prooxidant. For the determination of biodegradability of the films, lignocellulose-degrading Streptomyces viridosporus T7A (ATCC 39115) was used. Films were chemically disinfected and incubated with S. viridosporus by shaking at 100 rpm at 37$^{\circ}C$ for eight weeks. Hydroxyl indices of the films by Fourier-Transform Infrared Spectroscopy, mechanical Properties of the films by Instron and film morphology by scanning electron microscope (SEM) were measured. The hydroxyl index of the film containing the oxidized potato starch incubated with S. viridosporus T7A was higher than that of the corresponding control. All the films containing 5% and 10% oxidized starch showed a decrease of tensile strength on the films after incubation when the corresponding uninoculated film was compared. In the oxidized starch/PE film incubated with S. viridosporus T7A, partial destruction of starch and PE was examined by SEM.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1298-1305
• /
• 2000

Potato starches were crosslinked with 0.1, 0.5, 1.0, and 2.0% epichlorohydrin. Starch/polyethylene(PE) cast films were prepared to contain 5% of the crosslinked potato starch. Mechanical properties and degradability of these films were measured and compared to those of the films containing native potato starch. Mechanical strength of the films containing crosslinked potato starch was higher than that of the film containing native starch. Thermal degradability measured by a FT-IR and an Instron showed that crosslinked starch/PE films degraded faster than native starch/PE films. Biodegradability of the starch/PE films was accelerated by the addition of crosslinked starch to the PE films.