Polymer(Korea) (폴리머)

The Polymer Society of Korea (한국고분자학회)
권호 표지

Enhancement of Compatibility and Toughening of Commingled Packaging Film Wastes

혼합 폐포장 필름의 상용성 증진과 강인화

  • Jeon Byeong-Hwan (Department of Materials Science, Korea University) ;
  • Yoon Hogyu (Department of Materials Science, Korea University) ;
  • Hwang Seung-Sang (Polymer Hybrid Center, Korea Institute Science and Technology) ;
  • Kim Jungahn (Polymer Hybrid Center, Korea Institute Science and Technology) ;
  • Hong Soon-Man (Polymer Hybrid Center, Korea Institute Science and Technology)
  • 전병환 (고려대학교 재료공학과) ;
  • 윤호규 (고려대학교 재료공학과) ;
  • 황승상 (한국과학기술연구원 고분자하이브리드센터) ;
  • 김정안 (한국과학기술연구원 고분자하이브리드센터) ;
  • 홍순만 (한국과학기술연구원 고분자하이브리드센터)
  • Published : 2005.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

The relationships among mechanical properties, rheological properties, and morphology by reactive extrusion based on commingled pckaging film wastes contains polypropylene (PP) pckaging film system [PP/polyethylene (PE)/aluminum (Al)/poly(ethylene terephthalate) (PET)] and Nylon packaging film system[Nylon/PE/linear-low density polyethylene (LLDPE)] were investigated to improve the compatibility and toughness of these wastes using various compatibilizers such as ethylene vinylacetate (EVA), styrene-ethylene/butylene-styrene triblock copolymer (SEBS), styrene-ethylene/butylene-styrene-graft-maleic anhydride copolymer (SEBS-g-MA), polyethylene-graft-maleic anhydride (PE-g-MA), polypropylene-graft-maleic anhydride (PP-g-MA) , polyethylene-graft-acrylic acid (PE-g-AA) and polypropylene-graft-acrylic acid (PP-g-AA). Compared with simple melt blend system, the blends showed improvement of about $50\%$ increase in physical properties when SEBS and EVA were added. However, SEBS-g-MA thermoplastic elastomer which is highly reactive with amine terminal group of nylon, resulted in about $200\%$ increase in impact strength. This compatibilization effect resulted from the increase of interfacial adhesion and the reduction of domain size of dispersed phase in PP/Nylon blend system.

포장용 필름 등으로 사용되는 폴리프로필렌(PP)계 필름[PP/polyethylene(PE)/aluminum(Al)poly(ethylene terephthalate)(PET)]과 나일론(Nylon)계 필름[Nylon/PE/linear-low density polyethylene(LLDPE)] 등 혼합 폐포장 필름의 상용성 증진과 강인화를 위해 시판되는 여러 가지 상용화제 중 ethylene vinylacetate(EVA), styrene-ethylene/butylene-styrene triblock copolymer(SEBS), styrene-ethylene/butylene-styrene-graft-maleic anhydride copolymer(SEBS-g-MA), polyethylene-graft-maleic anhydride (PE-g-MA), polypropylene-graft-maleic anhydride(PP-g-MA), polyethylene-graft-acrylic acid(PE-g-AA), polypropylene-araft-acrylic acid(PP-g-AA) 등을 사용하여 반응 압출 공정에 의한 기계적 물성, 유성학적 성질과 형태학적 변화를 살펴보았다. 단순 용융 블렌드와 비교하여 상용화제로 SEBS와 EVA를 사용하였을 때 약 $50\%$의 물성 향상을 보였으나 나일론의 말단기인 아민기와의 반응성 향상을 위해 무수말레인산이 그래프트된 열가소성 탄성체 SEBS-g-MA의 사용시 분산 입자의 감소 및 접촉면적의 증가에 의한 계면 접착력의 증가로 약 $200\%$ 이상의 내충격성의 향상을 이룰 수 있었다.

Keywords

References

  1. L. A. Utracki, Polymer Alloys and Blends, Hanser, New York, 1989
  2. D. R. Paul and C. B. Bucknall, Polymer Blends, John Wiley and Sons, New York, 2000
  3. J. K. Kim, Lucky Polymer Technology, 27, 64 (1993)
  4. W. J. Choi, 1st Workshop on Cleaner Production Technology and Ecomaterials, 1, 35 (2001)
  5. C. S. Ha, H. D. Park, and W. J. Cho, J. Appl. Polym. Sci., 76, 1048 (2000)
  6. G. Radonjic and N. Gubeljak, Macromol. Matter. Eng., 287, 122 (2002)
  7. A. Pawlak, J. Morawiec. F. Pazzagli, M. Praeella, and A. Galesi, J. Appl. Polym. Sci., 86, 1473 (2002)
  8. M. Praeella, L. Rolla, D. Chionna, and A. Galeski, Macromol. Chem. Phys., 203, 1473 (2002)
  9. F. P. LA Mantia and C. Mongiovi, Polym. Degrad. Stab., 66, 337 (1999)
  10. F. P. LA Mantia and L. Capizzi, Polym. Degrad. Stab., 71, 285 (2001) https://doi.org/10.1016/S0141-3910(00)00111-7
  11. W. Michaeli and A. Grefenstein, Adv. Polym. Tech., 14, 263 (1995)
  12. A. Addeo, C. Morandi, and A. Vezzoli, Macromol. Symp., 78, 313 (1994)
  13. C. Tzoganakis, Adv. Polym. Tech., 9, 321 (1989)
  14. R. A. Pearson and A. F. Yee, J. Mater. Sci., 21, 2475 (1986)
  15. A. F. Yee and R. A. Pearson, J. Mater. Sci., 21, 2462 (1986)
  16. T. O. Ahn, C. K. Kim, B. K. Kim, H. M. Jeong, and J. D. Huh, Polym. Eng. Sci., 30, 341 (1990)