• 폴리머
• /
• 제25권3호
• /
• pp.343-348
• /
• 2001

Perfluorinated polyether diol(Fomblin ZDOL$ZDOL^{(R)}$)과 4,4'-diphenyl methane diisocyanate(MDI)로부터 합성된 불소화된 폴리우레탄 탄성체의 기계적 성질과 혈소판 점착 특성을 연구하였다. Fomblin 함량과 혼합 사용된 polyether polyol의 종류에 따른 기계적 성질의 검토를 인장실험 및 dynamic mechanical analysis를 통해 행하였다. 또한 혈소판 점착실험을 통해 불소화된 폴리우레탄 탄성체의 혈액적합성을 평가하였다. 기계적 물성은 혼합된 polyether polyol의 종류와 함량에 영향을 받았고, 혈소판 점착은 모든 불소화된 폴리우레탄에서 불소화 함량의 증가에 따라 감소하였다.

• 대한화학회지
• /
• 제38권2호
• /
• pp.129-135
• /
• 1994

Acyclic polyether dicarboxylic acid는 액체막계에서 금속이온의 운반체로 연구되었다. 수소이온이 이온화될 수 있는 리간드는 금속이온의 이동에 수소이온이 반대방향으로 이동된다. 이와 같은 리간드는 pH를 변화시키면 효과적으로 금속이온을 분리할 수 있고 농축시킬 수도 있다. 금속이온의 이동은 source phase의 염기의 농도와 receiving phase의 산의 농도를 증가시키면 증가된다. Acyclic polyether dicarboxylic acids를 운반체로 사용한 경쟁이동반응에서 칼슘이온을 선택적으로 분리할 가능성이 있다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 추계 총회 및 학술발표회
• /
• pp.114-116
• /
• 1999

• 대한치과보철학회지
• /
• 제44권4호
• /
• pp.363-373
• /
• 2006

Statement of Problem : The accuracy and dimensional stability of elastomeric impression materials have been the subject of numerous investigation. Few studies have addressed the effect of changes in time on the dimensional stability of impression materials. Purpose: The purpose of this investigation was to evaluate the effects of elastomeric impression materials and storage time on dimensional stability. Materials and methods: A total of 75 impressions were made of epoxy resin dies mimicked prepared 3-unit fixed partial denture. The dies had 1 buccolingual, 1 mesiodistal and 1 occlusogingival lines and interpreped dot. Impression materials investigated included two polyether impression materials and three polyvinylsiloxane impression material. 15 specimens were made of each impression material and poured by type IV stone over times (30 minutes, 24 hours, 72 hours) after mixing; the same examiner measured each specimen 3 times at a magnification of 3.5$\times$. All statistical tests were performed with the level of significance set at .05. Results : The results indicated that significant difference at any measuring point of stone dies of the polyether impression materials and when measurements at 30 minutes, 24 hours, and 72 hours were compared ; the length of measuring point increased significantly as time passed by. However this result is not significant clinically. Analysis also showed significant differences at any measuring point when polyvinylsiloxane and polyether impression materials were compared and significant differences clinically. Conclusion: Under the conditions of this study, the shrinkage rate of the polyvinylsiloxane and polyether impression materials significantly increased as time passed by. The polyether impression materials showed higher shrinkage significantly, while the shrinkage rate of all five materials showed a significant time-dependent increase.

• Bulletin of the Korean Chemical Society
• /
• 제22권10호
• /
• pp.1076-1080
• /
• 2001

• 대한치과보철학회지
• /
• 제31권2호
• /
• pp.207-218
• /
• 1993

The purpose of this study was to evaluate the reproducing accuracy of stone casts made from complete arch impressions using different impression materials. The impression materials studied were 1) polyether, 2) polysulfide, 3) polyvinyl siloxane, and 4) irreversible hydrocolloid. Impressions were made from a partially edentulous acrylic resin model with metal inserts in canine, first molar region bilaterally and mid palatal vault region. Each distance between 2 out of 5 meauring points was measured by using 3dimensional measuring machine. Impressions were poured at once with a type IV dental stone. Data were analyzed using t-test with a sample size of six. The results were as follow : 1. Polysulfide and polyether were significantly superior to polyvinyl siloxane and irreversible hydrocolloid in reproducing full arch model(p<0.05), but there were no statistical differences in amount of dimensional reproducing accuracy for full arch impression between polysulfide and polyether(p>0.05). 2. There were statistical differences in amount of dimensional reproducing accuracy between edentulous area and tooth bound area for polysulfide and polyether(p<0.05). but no statistical differences were observed for polyvinyl siloxane and irreversible hydrocolloid(p>0.05).

• 폴리머
• /
• 제25권1호
• /
• pp.33-40
• /
• 2001

불소화된 폴리우레탄 탄성체를 4,4'-diphenyl methane diisocyanate(MDI) 혹은 toluene 2,4-diisocyanate(TDI) 같은 diisocyanate와 perfluorinated polyether(Fomblin $ZDOL^{\circledR}$)로부터 2단계 용액 중합법에 의해 합성하였다. 합성된 폴리우레탄의 soft segment 부분 중 10~50%를 Fomblin ZDOL 성분이 되도록 polypropylene glycol(PPG) 혹은 polytetramethylene glycol(PTMG)과 같은 polyether polyol을 반응도중에 혼합하여 반응을 완성하였다. 사슬연장제로는 ethylene diamine 혹은 1,4-butanediol을 사용하였다. 합성 중합체의 확인과 평균분자량 등 특성조사에 FT-IR, $1^H$-NMR, 겔투과 크로마토그래피(GPC), 시차주사열량계(DSC)를 이용하였고 표면특성은 X-ray photoelectron spectroscopy(XPS)와 접촉각으로 조사하였다. 표면분석결과 불소기는 합성된 탄성체 필름의 내면보다 표면에 더 많이 분포함을 알 수 있었다

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1771-1776
• /
• 2007

The synthesis of well-defined dendrons based on aliphatic polyether dendritic cores and glassy polystyrene peripheries is described. The synthetic route involves a combination of living anionic polymerization and a stepwise convergent method consisting of iterative Williamson etherification and hydroboration/oxidation reactions. On the basis of molecular weight, as characterized by gel permeation chromatography (GPC), the first generation dendron (Generation-1) shows a random coil conformation like a linear polystyrene, while higher generations (Generation-2 and 3) reveal globular forms in solution.

• 한국추진공학회지
• /
• 제15권1호
• /
• pp.29-34
• /
• 2011

Hydroxyl terminated polyether(HTPE) 추진제는 전술용 모터에 현재까지도 적용되고 있는 HTPB/AP 추진제를 대체할 수 있는 추진제로서 최근에 개발되고 있다. 본 연구에서는 HTPE와 HTPB 추진제에 대한 파쇄성 시험을 수행하고 그 결과를 분석하였다. 추진제의 파쇄성은 바인더함량, 기계적 특성 및 연소속도에 의해 영향을 받았으며 연소속도가 증가할수록 기계적 인성이 낮아질수록 파쇄성은 증가하는 경향을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제28권5호
• /
• pp.811-815
• /
• 2007

A series of bispyrenyl-polyether have been synthesized and investigated as a fluorescent chemosensor for metal ions. The results showed that bispyrenyl-polyether system is selective towards Al3+ ion over other ions tested. In free ligand, excited at 343 nm, it displays a strong excimer emission at around 475 nm with a weak monomer emission at 375 nm. A ratiometry of monomer (375 nm) increase and excimer (475 nm) quenching was shown only when Al3+ ion is bound to ligand, because two facing pyrene groups form a less efficient overlap of π?π stacking compared with that of free ligand.