• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.239-242
• /
• 2001

Melting and crystallization are not reversible because supercooling is always needed for crystal growth. But, recently reversible melting and crystallization phenomena in semi-crystalline polymers, based on modulated differential scanning calorimetry(MDSC) with quasi-isothermal experiment mode were observed in the melting range and continuously proved by others. (omitted)

• Bulletin of the Korean Chemical Society
• /
• 제25권12호
• /
• pp.1941-1944
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• 제17권1호
• /
• pp.11-15
• /
• 1996

A series of poly(1,4-phenylene terephthalates) with pendant NLO chromophores was prepared by the solution polycondensation of 2,5-NLO chromophore substituted terephthalic acid with hydroquinone. The polymers obtained gave satisfactory NMR and elemental analysis results when taking into account their expected structures and the inherent viscosity value proved the polymeric character of all polymers. DSC, optical polarizing microscopy and WAXS studies revealed that none of these polymers exhibited liquid crystalline mesophases. Preliminary results on NLO properties of these polymers showed a surprisingly large second harmonic signal relative to a Y-cut quartz plate.

• 청정기술
• /
• 제8권4호
• /
• pp.223-228
• /
• 2002

다양한 화학구조를 포함하는 폴리에스테르를 분해성 수지인 셀룰로오스와 비분해성 수지인 PVC 및 PE를 기준물질로 한 controlled compost test와 soil burial test를 적용하여 생분해 거동을 살펴보았다. 이들 고분자의 화학구조가 유연한 지방족 사슬과 에스테르기를 가지고 있는 지방족 폴리에스테르는 가수분해 효소에 의해 분해되고, 방향족 고리를 포함하는 공중합 형태의 폴리에스테르는 상대적으로 낮은 생분해도를 보여주었다. 조절된 퇴비화 조건에서 셀룰로오스가 45일에 70.6%의 분해도를 보일 때, 합성된 poly(butylene adipate-co-succinate), poly(butylene succinate), poly(butylene adipate-co-succinate-co-terephthalate)는 각각 44.0%, 32.0%, 23.4%,의 생분해도를 보여주어 이들 고분자의 화학적 구조에 따라 생분해거동이 많은 영향을 받음을 확인하였다.

• Macromolecular Research
• /
• 제12권2호
• /
• pp.195-205
• /
• 2004

We have synthesized new aromatic polyesters (DiPEG-HQ and DiPEG-BP) by condensation polymerization of a terephthalic acid derivative bearing a pendant oligo(oxyethylene) (DP = 7, MW = 350), which has a methoxy terminal group, and two different aromatic diols, hydroquinone and 4,4'-biphenoI. The synthesized polymers were characterized by differential scanning calorimetry (DSC), polarizing microscopy, and X-ray diffractometry for their liquid crystallinity (LC), thermal transitions, and structural morphologies in mesophases. The morphology of the LC phases depends strongly on the length of the rigid backbone repeating unit. The DiPEG-BP polymer having a longer repeating unit exhibits both layered and nematic structures before isotropization, whereas the DiPEG-HQ polymer having a shorter repeating unit shows only the layered structure in the mesophase. We found that the layer spacing for DiPEG-HQ is larger than that for DiPEG-BP. Both polymers easily form complexes with LiCF$_3$SO$_3$; we studied this complex formation by FT-IR spectroscopy. The layer spacing of the polymer-electrolyte composites increases upon increasing the amount of the lithium salt. The polymer/salt electrolyte mixtures we investigated at molar ratios of EO:salt in the range of 5-20 exhibit electrical conductivity values at 40$^{\circ}C$ of 2.4${\times}$10$\^$5/ and 1.1${\times}$10$\^$－5/ S/cm for DiPEG-HQ/LiCF$_3$SO$_3$ and DiPEG-BP/LiCF$_3$SO$_3$, respectively. At 80 $^{\circ}C$, these values are higher: 4.6${\times}$10$\^$－3/ and 1.1${\times}$10$\^$－4/ S/cm, respectively. The activation energy of conductivity depends strongly on the salt concentration.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.4041-4046
• /
• 2010

유연한 알콕시 곁사슬을 갖는 전방향족 폴리에스터가 direct polycondensation에 의하여 합성되었으며, 합성된 중합체들은 $^1H$-NMR, FT-IR, DSC, TGA, 편광현미경 및 X-ray 분석기에 의하여 조사되었다. 1,1,2,2-테트라클로로에탄(TCE)을 용매로 사용하여 측정된 중합체의 고유점성도(${\eta}_{inh}$)는 0.46~2.41 dL/g의 값을 나타내었다. 곁사슬을 갖는 중합체들은 두 개의 용융전이 즉, 고체상-sanidic 액정상으로의 전이 ($T_{m1}$)와 sanidic 액정상-nematic 액정상으로의 전이 ($T_{m2}$)를 나타내었으며, 알콕시 곁사슬의 길이가 증가함에 따라 상전이온도들은 감소하고, 유기용매에 의한 용해도는 증가하는 경향을 나타내었다. X-ray 분석에서, $2{\theta}\;{\simeq}5$와 $2{\theta}\;{\simeq}20$ 피이크는 각각 중합체 주사슬과 긴 곁사슬의 결정화에 의한 것으로 나타났다.

• 한국응용과학기술학회지
• /
• 제22권3호
• /
• pp.270-280
• /
• 2005

To maximize a synergy effect in flame-retardancy of flame-retardant coatings, phosphorus and chlorine were introduced in polymer chains. Two-components PU flame-retardant modified polyesters (ABTTC-10C, -20C, -30C) were prepared by curing, at room temperature, of isocyanate (allophanate-trimer) and prepared modified polyesters which contain phosphorus and chlorine. To examine the film properties of the prepared flame-retardant coatings, film specimens were prepared with the prepared coatings. The film properties of ABTTC, ABTTC-10C and ABTTC-20C, which contain 0, 10 and 20wt%, 2,4-dichlorobenzoic acid (2,4-DCBA), respectively, were proved to be good, whereas the film properties of ABTTC-30C, which contains 30wt% 2,4-DCBA, were proved to be a little bit poor. Two kinds of flame retardancy tests, $45^{\circ}$Meckel burner method and LOI method, were performed. With the $45^{\circ}$Meckel burner method, three flame-retardant coatings except ABTTC showed less than 3.4 cm of char length, and showed less than 2 seconds of afterflaming and afterglow. From this result, the prepared flame-retardant coatings were proved to have the 1st grade flame retardancy. With the LOI method, the LOI values of the coatings containing more than 10wt% 2,4-DCBA were higher than 30wt%, which means that the coatings possess good flame-retardancy. From these results, it was found that synergistic effect in flame-retardancy was taken place by the introduced phosphorus and chlorine.

• 한국응용과학기술학회지
• /
• 제23권1호
• /
• pp.26-36
• /
• 2006

The aim of this study is to synthesis basic resins for the preparation of PU flame-retardant coatings that contain phosphorus and chlorine. After synthesizing intermediates of tetramethylene bis(orthophophate) (TMBO) and neohexanediol trichlorobenzoate (TBA-adduct), the condensation polymerization was performed with the intermediates, 1,4-butanediol, and adipic acid to obtain four-component copolymers. In the condensation polymerization, the content of phosphorus was fixed to be 2%, and the content of trichlorobenzoic acid (TBA) that provides chlorine component was varied to be 10, 20, and 30wt%, and we designated the prepared modified polyesters containing chlorine and phosphorus as TTBA-10C, TTBA-20C and TTBA-30C. Average molecular weight and polydispersity index of the prepared TTBAs decreased with increasing TBA content because of the increase in the number of hydroxyl groups that retards reaction. We found that the thermal stability of the prepared TTBAs increased with chlorine content at high temperatures.

• 한국응용과학기술학회지
• /
• 제22권2호
• /
• pp.123-135
• /
• 2005

Reaction intermediates PCP/BZA (PBI) and tetramethylene bis(orthophosphate)(TBOP) were synthesized from polycaprolactone (PCP) and benzoic acid (BZA) and from pyrophosphoric acid and 1,4-butanediol, respectively. Benzoic acid modified polyesters containing phosphorus (APTB-S, -10, -15) were synthesized by polycondensation of the prepared PBI (containing 5, 10, 15wt% of benzoic acid), TBOP, adipic acid, and 1,4-butanediol. Network structured PU flame-retardant coatings (APHD) were prepared by curing the synthesized benzoic acid modified polyesters containing phosphorus (APT B - 5 , -10, -15) with hexamethylene diisocyanate (HDI)-timer. From the TGA analysis of APTBs, it was found that the afterglow decreased with the amount of BZA content at the high temperatures. With the introduction of BZA, the film viscosity and film hardness of APHD decreased. With the introduction of caprolactone group, the flexibility, impact resistance, accelerated weathering resistance of APTBs increased. Flame retardancy of the coatings was tested. In a vertical burning method, APHD shows 210$^{\sim}$313 seconds, which indicates that the coatings are good flame-retardant coatings. Moreover, the amount of afterglow and flame retardancy of the coatings are decreased with increasing BZA content.

• Elastomers and Composites
• /
• 제48권4호
• /
• pp.306-311
• /
• 2013

주 사슬의 강직그룹의 하이드로퀴논 단위에 4-클로로벤조에이트기가 결합된 액정폴리에스터가 단위체인 2,5-다이(4-클로로벤조에이트)하이드로퀴논과 4,4'-디카복시-${\alpha},{\omega}$-디페녹시 알케인의 용액중합에 의하여 합성되었다. 합성된 중합체의 구조와 성질은 $^1H$-NMR, FT-IR, DSC, TGA, POM에 의하여 조사되었다. 조사의 결과에 의하면, 중합체 사슬의 메틸렌기와 벌키한 치환기는 용해도나 열전이와 같은 성질에 큰 영향을 미쳤으며, 모든 중합체들은 편광현미경 관찰에서 약한 복굴절 현상을 갖는 네마틱 액정상의 texture를 나타내었고, 매우 좁은 액정상 온도구간을 나타내었다.