• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.86-91
• /
• 2007

Polydimethylsiloxane branched HEMA (SH) was Prepared by reacting polydimethylsilorane prepolymer and 2-hydroxyethyl methacrylate (HEMA). Polyacrylate modified Polyorganosiloxane (SMPA) was prepared by polymerization of methacrylic acid(MA), allyl glycidyl ether(AGE), aminopro- pyltrimethoxysilane (APTS), and SH. Their structures were confirmed by the measurement of FTIR and $^1H-NMR$ and thermal properties of SMPA were studied from TGA. Residual weight of SMPA at $400^{\circ}C$ increased according to increasing content of the APTS to 63 from 55%. SMPA sealant was prepared by adding additives, such as viscosity increasing agent, crosslinking agent, and fillers. Adhesion characteristics of SMPA-3 sealant was determined to be maximum load elongation, 2.01 %, and break load elongation, 2.28%. Adhesion characteristics for SMPA sealant prepared from SMPA-3 were better than those for SMPA sealant prepared from SMPA-1 and SMPA-2.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.11
• /
• pp.1490-1495
• /
• 2010

Two experiments were conducted to evaluate the effects of addition of sodium polyacrylate (SPA) to a phytasesupplemented diet on the performance and phosphorus (P) retention of chicks. In experiment 1, chicks were randomly allocated to four dietary treatments which were fed from 7 to 21 days of age: i) basal diet (low nonphytate phosphorus (0.23% NPP)); ii) basal with 250 U/kg diet of phytase; iii) as (ii) with 2.5 g/kg diet of SPA; and iv) as (ii) with 5.0 g/kg diet of SPA. In experiment 2, three replicates, each with three chicks, were fed from 7 to 28 days of age the basal diet (0.23% NPP) with supplementation of phytase (0, 300, 600, 900 U/kg diet) and SPA (0, 2.5 g/kg diet) in a $4{\times}2$ factorial arrangement. In Experiment 1, feed efficiency was improved and excreted P was 10% less with phytase supplementation. However, the addition of SPA did not affect performance or P excretion. Dietary SPA supplementation to the diets showed significantly higher amounts of P retention, and highest values were observed in chicks fed 2.5 g/kg of the SPA-supplemented diet. In Experiment 2, feed efficiency was improved with phytase supplementation, and the addition of SPA showed significant improvement in feed efficiency. Excreted P was significantly lower in chicks fed SPA-supplemented diets, and the retained P coefficient improved with SPA supplementation. In conclusion, the increased transit time of digesta with suitable supplementation levels of SPA may allow phytase activity to be more effective in the degradation of phytate, and improve P retention.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.434-441
• /
• 2010

Sodium polyacrylate (PAANa) was synthesized by inverse emulsion polymerization method to absorb excess water in concrete. Liquid paraffin was used as a continuous phase. Acrylic acid (AA) was neutralized by aqueous sodium hydroxide solution (8 M). Different amount of N,N'-methylene bisacrylamide (MBA) was used as a crosslinking agent to change crosslinking density of the synthesized PAANa. The size distribution of synthesized particles was measured by particle size analyzer. Swelling ratio of crosslinked PAANa was evaluated from the equation in D. I. water, cement aqueous solution, and $Ca(OH)_2$ aqueous solution. The FTIR spectroscopy was used to characterize $Ca^{2+}$ ion interaction with PAANa. Incorporation of 1.0 wt% PAANa into cement increased compressive and flexural strength approximately 30% and 10%, respectively, compared with those of ordinary portland cement.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.690-694
• /
• 2021

Carbon spheres (CS) were fabricated using glucose as a precursor in the hydrothermal method. Hollow TiO₂ (H-TiO₂) spheres with 200 nm, 500 nm, and 1,200 nm were synthesized by CS/TiO₂ core-shell particles via a sol-gel and calcination method. H-TiO₂ spheres with nano and micron sizes were characterized using FE-SEM, HR-TEM, and X-ray diffraction. The CIE color coordinate, solar reflectance, and heat shield temperatures of H-TiO₂/polyacrylate (PA) composite film were investigated using a UV-Vis-NIR spectrometer and homemade heat insulation temperature measuring device. H-TiO₂/PA composites exhibit excellent thermal insulation since the hollow structure filled with dry air has low thermal conductivity and near infrared light reflecting performance. The thermal insulation increased with increasing the hollow sphere (HS) size on H-TiO₂/PA composites. The PA composite film mixed with H-TiO₂ filled with 1200 nm HS reduced the heat shield temperature by 26 ℃ compared to that of the transparent glass counterpart.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.1
• /
• pp.35-45
• /
• 2012

Polyacrylate dispersion(emulsion) as adhesive material was superior in quality such as preservation characteristics and reversibility. The tapes for repairing archival documents manufactured with four different types of formulation resulted in pH 7~8.8, soluble solid 50~52%, and viscosity 1,300~2,500 cps. Sample 4 of those was most excellent. Probably, sample 4 included inorganic materials such as MgO, silica gel, and zeolite. For selecting carrier of tape, tracing papers, were applied for manufacturing tapes and tested for adhesive strength and peel strength. Adhesive strength of tracing papers, was 3.1~3.8(N/10mm), 2.2~2.8(N/10mm), and 1.7-2.3(N/10mm), respectively. Peel strength was similar in all samples. To determine characteristic of conservation to the selected carriers, stability of deterioration was examined at conditions of $105^{\circ}C$ and $80^{\circ}C$ 65% for 7 days.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.101-106
• /
• 2005

Photocurable modified 6 functional polyacrylate(PA-1) were prepared from dipentaerythritol derivatives (DPET) and acrylic acid, and 12 functional polymethacrylate(PA-2) were prepared from dipentaerythritol derivatives (DPET), trimellitic anhydride, and glycidyl methacrylate. And physical properties of photocurable modified poly(meth)acrylate were increased with increasing functionality of (meth)acrylate. Thermal stability of UV cured film obtained by using TGA was shifted to higher temperature as the increasing of functionality. Hardness, abrasion resistance and tensile strength of UV cured film were increased with increasing functionality of (meth)acrylate. Values of yellow index were increased with increasing functionality of (meth)acrylate.

• Journal of the Korean Applied Science and Technology
• /
• v.10 no.1
• /
• pp.49-55
• /
• 1993

Ground Calcium Carbonate, among paper coating pigments, will influence less dispersant demand, less binder demand, increase coating solids from 58% to 70%, which means high speed coating, less shrinkage during drying, less energy consumption, more uniform coverage of fibers. The quality point of view of Ground Calcium Carbonate, brightness, particle size, Particle size distribution, hardness, impurities content are important. More important factors of Ground Calcium Carbonate which influence the paper coating process are dispersion mechanisms and their effects. The study was made to investigate the effect of Ground Calcium Carbonate dispersion by sodium salt of polyacrylate dispersant composition and dispersion condition. Basic tests such as physical, optical and chemical were perfumed, and dispersion effects were investigated by different conditions. The results showed that the type of dispersant affected the dispersion effects, and the Ground Calcium Carbonate has critical dispersant demand.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.1-11
• /
• 2010

The physicochemical characteristics, adhesion power, and conservation of imported tapes repairing documents that consisted of adhesive, carrier, and masking were investigated. Materials related to pressure sensitive adhesive produced in domestic companies were examined also. And then, the performance evaluation of prototype manufactured in our laboratory was undertaken. Both the pressure sensitive tapes were compared. The polyacrylate of adhesive agents such as polyacrylate, starch, Glue, and PVA of imported tapes was best. The adhesion strength, power, reversibility, and stability (deterioration) of imported tapes were analyzed. By comparing results of imported tapes, two adhesive agents were selected finally. The carriers of imported tapes are made of one of papers, cotton sheets, and felts. Major carrier material was a paper. The jutes, conifers, and hardwoods were main ingredient of papers. The durability of Hangi($18{\pm}2g/m^2$) was one and half times superior to imported one.

• Journal of Adhesion and Interface
• /
• v.9 no.1
• /
• pp.16-21
• /
• 2008

Hybrid emulsions consisting of polyurethane and acrylic polymer were prepared by emulsion polymerization of acrylic monomers and polyurethane water dispersions (PUD) as an emulsifier. At first, cationic type of PUD was synthesized with IPDI, PTMG1000, MDEA, and acetic acid. Then, acrylic monomers, such as MMA and n-BA, were copolymerized with the PUD without adding further surfactant. The tensile properties and water resistance increased with increasing acrylic monomer ratio. The hybrid emulsions showed better properties than the emulsions simply blended with the PUD and the acrylic emulsions.

• Analytical Science and Technology
• /
• v.14 no.6
• /
• pp.471-475
• /
• 2001

Solid phase microextraction(SPME) with $85{\mu}m$-polyacrylate (PA) and $100{\mu}m$-polydimethylsiloxane(PDMS) fibers, coupled to gas chromatography-mass spectrometry was used to determine 1,2-dibromo-3-chloropropane(DBCP) and n-butylbenzene in water. The conditions affecting the SPME process(i.e, extraction time, injection length, injection temperature, desorption time and temperature) were optimized. The linearity of the calibration curve (correlation coefficient, R) was over 0.99 and the limits of detection of the method were between 1.5 and $10.8{\mu}g/L$. Repeatability of the method was between 10.4 and 14.4 %.