• Macromolecular Research
• /
• v.15 no.2
• /
• pp.178-184
• /
• 2007

A poly(ethylene terephthalate) (PET)/organosilicate nanocomposite, with enhanced mechanical properties, has been prepared using the melt intercalation method. For this purpose, a new organic modifier has been synthesized for the preparation of organosilicate, which is thermally stable and compatible with PET. The use of the new organosilicate yielded almost exfoliated PET nanocomposite; whereas, the PET nanocomposites prepared by use of commercial organoclays (Cloisite 15A and 30B) show only an intercalated morphology. Particularly, the use of the new organosilicate showed an enhanced tensile modulus, and without sacrifice of the tensile strength and elongation on breaking, while the use of commercial organoclays only exhibit a trade-off between those mechanical properties.

• Carbon letters
• /
• v.13 no.1
• /
• pp.51-55
• /
• 2012

In this work, expanded graphite (EG)-reinforced poly(ethylene terephthalate) (PET) nanocomposites were prepared by the melt mixing method and the content of the EG was fixed as 2 wt%. The effect of multi-walled carbon nanotubes (MWCNTs) as a co-carbon filler on the electrical and mechanical properties of the EG/PET was investigated. The results showed that the electrical and mechanical properties of the EG/PET were significantly increased with the addition of MWCNTs, showing an improvement over those of PET prepared with EG alone. This was most likely caused by the interconnections in the MWCNTs between the EG layers in the PET matrix. It was found that the addition of the MWCNTs into EG/PET led to dense conductive networks for easy electron transfers, indicating a bridge effect of the MWCNTs.

• Macromolecular Research
• /
• v.12 no.1
• /
• pp.85-93
• /
• 2004

We have prepared poly(ethylene terephthalate) (PET) nanocomposites filled with two different types of fumed silicas, hydrophilic (FS) and hydrophobic (MFS) silicas of 7-nm diameter, by in situ polymerization. We then investigated the morphological changes, rheological properties, crystallization behavior, and mechanical properties of the PET nanocomposites. Transmission electron microscopy (TEM) images indicate that the dispersibility of the fumed silica was improved effectively by in situ polymerization; in particular, MFS had better dispersibility than FS on the non-polar PET polymer. The crystallization behavior of the nanocomposites revealed a peculiar tendency: all the fillers acted as retarding agents for the crystallization of the PET nanocomposites. The incorporation of fumed silicas increased the intrinsic viscosities (IV) of the PET matrix, and the strong particleparticle interactions of the filler led to an increased melt viscosity. Additionally, the mechanical properties, toughness, and modules of the nano-composites all increased, even at low filler content.

• Textile Coloration and Finishing
• /
• v.15 no.3
• /
• pp.185-191
• /
• 2003

Surface modification of poly(ethylene terephthalate) (PEI) films by treatment with ethoxylated alkylaminoanthraquinoes which was synthesized by the reaction of 1-aminoanthraquinone with poly(ethylene glycol) via a series of methylene spacer were investigated. The synthesized ethoxylated alkylaminoanthraquinones showed definite cloud point as in nonionic surfactants, and the adsorption of the compounds on PET increased near the cloud point. At same temperature the adsorption increased with the length of methylene spacer; hexyl-octyl-, and decyl-. The adsorption was limited to the extreme surface of PET film, which made the surface of PET film hydrophillic by reducing water contact angle.

• Journal of the Korean Magnetic Resonance Society
• /
• v.9 no.2
• /
• pp.155-162
• /
• 2005

The interaction of poly(ethylene glycol)(PEG) with cationic dodecyl trimethyl ammonium bromide (DTAB)micelle was studied with electron spin resonance (ESR) by determining line widths of the ESR spectra and coupling constant of nitrogen($A_N$). The degree of ESR line shape change such as line widths and coupling constant indicated that PEG mixes well with DTAB micelle due to a great hydrophobic interaction with surfactant alkyl chains. This suggests that the PEG can be used as non-ionic surfactant to disperse the exposed oil in the ocean.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.9
• /
• pp.748-751
• /
• 1994

Poly(ethylene oxide) (PEO) in aqueous solutions has a hydrophobic character which can induce the hydrophobic interaction between its nonpolar parts. The hydrophobic properties of aqueous PEO solutions are studied by the viscometry in terms of the water structure-making and -breaking capabilities of added solutes of ureas. The results show that the contracted conformation of PEO of low molecular weight, namely poly(ethylene glycol) (PEG), does not result from the hydrophobic interaction between the nonpolar parts of PEO but it can participate in a hydrophobic interaction between the nonpolar parts of PEO and added ureas solutes with nonpolar groups, which can induce a large hydrodynamic volume and increase the viscosity. On the other hand, the PEO of large molecular weight seems to behave like any other water soluble polymers with nonpolar parts and its conformation in aqueous solutions is well explained in terms of water structure perturbing capabilities of added ureas.

• Elastomers and Composites
• /
• v.38 no.1
• /
• pp.51-56
• /
• 2003

Cloud-point and bubble-point data to $170^{\circ}C$ and 50 bar are presented for four different solvents, normal pentane. n-hexane, n-heptane, and n-octane with poly(ethylene-co-42 wt% octene) ($PEO_{42}$) copolymer. The pressure-concentration isotherms measured for $PEO_{42}$ - normal pentane have maximums at around 5 wt% of the copolymer concentrations in the solution. $PEO_{42}$- normal pentane system exhibits LCST-type phase behavior at temperatures greater than $130^{\circ}C$. Below $120^{\circ}C$, bubble-point type transitions are observed. However, the binary mixtures for $PEO_{42}$ in n-hexane, n-heptane, and n-octane have only bubble-point type transitions at the pressure-temperature region investigated in this study. The single-phase region of PEO - alkane mixtures increases with the molecular size of alkane solvent due to the increasing dispersion interactions between PEO and the alkane.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.438-442
• /
• 2011

Mechanical and morphological properties of poly(acrylonitrile-butadiene-styrene) (ABS) and poly(lactic acid) (PLA) blends containing compatibilizers were investigated. Poly(styrene-acrylonitrile)-g-maleic anhydride) (SAN-g-MAH), poly(ethylene-co-octene) rubber-maleic anhydride (EOR-MAH) and poly(ethylene-co-glycidyl methacrylate) (EGMA) were used as compatibilizers. Mechanical properties such as tensile, flexural and impact strengths of ABS/PLA (80/20, wt%) blends were found to be increased when the SAN-g-MAH, EOR-MAH and EGMA were used. The maximum values for mechanical properties of the ABS/PLA (80/20) blend were observed when SAN-g-MAH was used as a compatibilizer at the concentration of 3 phr. From morphological studies of the ABS/PLA (80/20) blends, PLA droplet size was decreased by the addition of the compatibilizers used in this study. From the results of mechanical and morphological properties of the ABS/PLA (80/20) blends, SAN-g-MAH (3 phr) was found to be the most effective compatibilizer among the compatibilizers used in this study.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.251-256
• /
• 2011

Effect of poly(propylene-co-octene) as a compatibilizer in toughened polypropylene/ poly(ethylene-co-octene) (EOC) was investigated. The EOCs used were metallocene catalyzed commercial linear low density polyethylene and they are elastomeric materials. The poly(propylene-co-octene) was synthesized by metallocene catalyst in our laboratory to be used as a compatibilizer in PP/EOC blends. PP/EOC blends without compatibilizer shows very low mechanical properties in specimens with weldlines while incorporation of a compatibilizer significantly increases the mechanical properties of specimens with weldlines. However, compatibilized PP/EOC blends does not show increased impact property in a weldline free specimen and it is attributed to low molecular weight of the poly(propylene-co-octene) synthesized in present study. It is expected that the poly(propylene-co-octene) having increased molecular weight provides very good performance as an effective compatibilizer in toughened polypropylene/EOC blends.

• Proceedings of the Korean Fiber Society Conference
• /
• 1997.04a
• /
• pp.246-250
• /
• 1997