• 제목/요약/키워드: Poly-4-vinylphenol (PVP)

검색결과 36건 처리시간 0.042초

유기박막 트랜지스터용 PVP (poly-4-vinylphenol) 게이트 절연막의 제작과 특성 (Preparation and Properties of PVP (poly-4-vinylphenol) Gate Insulation Film For Organic Thin Film Transistor)

  • 백인재;유재헉;임현승;장호정;박형호
    • 마이크로전자및패키징학회지
    • /
    • 제12권4호통권37호
    • /
    • pp.359-363
    • /
    • 2005
  • 유기 박막트랜지스터 (OTFT)를 제작하기 위하여 게이트 절연막으로서 PVP 계통의 유기막을 갖는 MIM(metal-insulator-metal)구조의 유기 절연층 소자를 제작하였다. 유기 절연층의 형은 ITO/Glass 기판위에 polyvinyl 계열의 PVP(poly-4-vinylphenol)를 용질로, PGMEA (propylene glycol monomethyl ether acetate)를 용매로 사용하여 co-polymer PVP를 제조하였다. 또한 열경화성 수지인 poly(melamine-co-formaldehyde)를 경화제로 사용하여 cross-linked PVP 절연막을 합성하였다. 유기 절연층의 전기적 특성은 co-polymer PVP 소자에 비해 cross-link 방식으로 제조된 소자에서 약 300 pA의 낮은 누설전류와 상대적으로 낮은 잡음전류의 특성을 나타내었다. 또한 cross-linked PVP 절연막에서 보다 양호한 표면형상 (거칠기)이 관찰되었으며 정전용량 값은 약 0.11${\~}$0.18 nF의 값을 나타내었다.

  • PDF

게이트 절연막 Poly(4-vinylphenol) 용제 비율에 따른 유기 박막 트랜지스터 특성 변화 (Gate insulator Poly(4-vinylphenol) solvent concentration organic thin-film transistor characteristic effect)

  • 전준호;김정민;이동훈;김용상
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.1700-1701
    • /
    • 2011
  • 본 논문에서는 게이트 절연막인 poly(4-vinylphenol) (PVP) 용제 농도 변화에 따른 유기 박막 트랜지스터를 제작하고 그 특성을 분석하였다. PVP는 propylene glycol monomethyl ether acetate(PGMEA) 와 poly melamine-co-formaldehyde (CLA)를 혼합하여 cross linked PVP를 만들어 사용하였다. Cross-liked PVP의 CLA 농도 비율을 각각 6 wt%, 9 wt%로 변화시켜 유기 박막 트랜지스터를 제작하고 소자의 전기적 특성을 분석 하였다.

  • PDF

Polyethersulfone(PES) 및 유리 기판위에 제작된 PVP 게이트 절연막의 전기적 특성 (Electrical Properties of PVP Gate Insulation Film on Polyethersulfone(PES) and Glass Substrates)

  • 신익섭;공수철;임현승;박형호;장호정
    • 마이크로전자및패키징학회지
    • /
    • 제14권1호
    • /
    • pp.27-31
    • /
    • 2007
  • 휨성 유기박막트랜지스터(organic thin film transistor, OTFT)를 제작하기 위하여 게이트 절연막으로 PVP(poly-4-vinylphenol) 유기막을 이용하여 MIM (metal-insulator-metal) 구조의 캐패시터 소자를 제작하였다. 유기 절연층의 형성은 Al/PES (polyethersulfone) 기판과 ITO/Glass 기판 위에 PVP를 용질로, PGMEA(propylene glycol monomethyl ether acetate)를 용매로 사용하였다 또한 열경화성 수지인 poly(melamine-co-(ormaldehyde)를 사용하여 cross-linked PVP 절연막을 합성하여 스핀코팅법으로 소자를 형성하였다. 제작된 소자에 대해 절연막 두께와 기판 종류에 따른 전기적 특성을 조사한 결과 Al/PES 기판을 사용하였을때 누설전류는 1.3 nA로 ITO/glass 기판을 사용했을때의 27.5 nA보다 크게 개선되었다. 또한 제작된 모든 캐패시터 소자의 정전용량은 $1.0{\sim}1.2nF/cm^2$ 범위로 나타났으며 계산값과 매우 유사한 결과를 얻을 수 있었다.

  • PDF

Poly (4-vinylphenol) 게이트 절연체를 적용한 IGZO TFT의 열처리 온도에 따른 전기적 특성 분석 (Electrical Characteristic Analysis of IGZO TFT with Poly (4-vinylphenol) Gate Insulator according to Annealing Temperature)

  • 박정현;정준교;김유정;정병준;이가원
    • 반도체디스플레이기술학회지
    • /
    • 제16권1호
    • /
    • pp.97-101
    • /
    • 2017
  • In this paper, IGZO thin film transistor (TFT) was fabricated with cross-linked Poly (4-vinylphenol) (PVP) gate dielectric for flexible, transparent display applications. The PVP is one of the candidates for low-temperature gate insulators. MIM structure was fabricated to measure the leakage current and evaluate the insulator properties according to the annealing temperature. Low leakage current ( <0.1nA/cm2 @ 1MV/cm ) was observed at $200^{\circ}C$ annealing condition and decreases much more as the annealing temperature increases. The electrical characteristics of IGZO TFT such as subthreshold swing, mobility and ON/OFF current ratio were also improved, which shows that the performance of IGZO TFTs with PVP can be enhanced by reducing the amount of incomplete crosslinking in PVP.

  • PDF

넓은 다이내믹 레인지의 유연 촉각센서 적용을 위한 PVP 유전층과 PDMS 접착력 검증 (Verification of Bonding Force between PVP Dielectric Layer and PDMS for Application of Flexible Capacitive-type Touch Sensor with Large Dynamic Range)

  • 원동준;허명;김준원
    • 로봇학회논문지
    • /
    • 제11권3호
    • /
    • pp.140-145
    • /
    • 2016
  • In this paper, we fabricate arrayed-type flexible capacitive touch sensor using liquid metal (LM) droplets (4 mm spatial resolution). Poly-4-vinylphenol (PVP) layer is used as a dielectric layer on the electrode patterned Polyethylene naphthalate (PEN) film. Bonding tests between hydroxyl group (-OH) on the PVP film and polydimethylsiloxane (PDMS) are conducted in a various $O_2$ plasma treatment conditions. Through the tests, we can confirm that non-$O_2$ plasma treated PVP layer and $O_2$ plasma treated PDMS can make a chemical bond. To measure dynamic range of the device, one-cell experiments are conducted and we confirmed that the fabricated device has a large dynamic range (~60 pF).

Low Hysteresis Organic Thin Film Transistors with Modified Photocrosslinkable Poly (4-vinylphenol)

  • Kim, Doo-Hyun;Kim, Hyoung-Jin;Kim, Byung-Uk;Kim, We-Yong;Kim, Ho-Jin;Hong, Mun-Pyo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.563-565
    • /
    • 2009
  • We introduce the new modification approaches of photocrosslinkable poly (4-vinylphenol) (PVP) for low hysteresis organic thin film transistors (OTFTs). The dielectric layers were composed of different PVP resin, low molecular melamine, and halogen free photo-initiator. The low hysteresis OTFT from one of the organic gate dielectrics has been realized. The electrical performance of low hysteresis OTFT with photocrosslinkable PVP exhibited a field-effect mobility of 0.2 cm2/Vs, a threshold voltage of - 0.04V, hysteresis of 0.4V.

  • PDF

PVP(Poly 4-vinylphenol) 게이트 유전체의 표면에너지 차이를 이용한 유기박막트랜지스터 어레이의 소스/드레인 전극 인쇄공정 (A Printing Process for Source/Drain Electrodes of OTFT Array by using Surface Energy Difference of PVP (Poly 4-vinylphenol) Gate Dielectric)

  • 최재철;송정근
    • 대한전자공학회논문지SD
    • /
    • 제48권3호
    • /
    • pp.7-11
    • /
    • 2011
  • 본 논문에서는 간단하면서도 수율 높은 유기박막트랜지스터(OTFT)의 소스/드레인 전극 형성을 위한 인쇄공정을 제안하였다. 게이트 유전체인 PVP (poly 4-vinylphenol)에 불소계 화합물을 3000 ppm 첨가하여 표면에너지를 56 $mJ/m^2$에서 45 $mJ/m^2$로 줄이고, 소스/드레인 전극이 형성될 영역은 포토리소그라피로 형상화 한 후 산소 플라즈마로 선택적으로 표면처리하여 표면에너지를 87 $mJ/m^2$로 높임으로써 표면에너지 차이를 극대화 하였다. G-PEDOT:PSS 전도성 고분자를 브러쉬 인쇄공정으로 소스/드레인 전극 영역 주변에 도포하여 전극을 성형하였으며, OTFT 어레이 ($16{\times}16$)에서 약 90% 가까운 수율을 나타내었다. 불소계 화합물을 첨가한 PVP와 펜타센 반도체를 사용한 OTFT의 성능은 첨가하지 않은 소자와 비교하여 큰 차이가 없었으며, 이동도는 0.1 $cm^2/V.sec$ 로서 전기영동디스플레이(EPD) 시트를 구동하기에 충분한 성능이었다. OTFT 어레이에 EPD 시트를 부착하여 성공적인 작동을 확인하였다.

Poly-4-vinylphenol and Poly (melamine-co-formaldehyde)-based Tungsten Diselenide (WSe2) Doping Method

  • Nam, Hyo-Jik;Park, Hyung-Youl;Park, Jin-Hong
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
    • /
    • pp.194.1-194.1
    • /
    • 2015
  • Transition metal dichalcogenide (TMD) with layered structure, has recently been considered as promising candidate for next-generation flexible electronic and optoelectronic devices because of its superior electrical, optical, and mechanical properties.[1] Scalability of thickness down to a monolayer and van der Waals expitaxial structure without surface dangling bonds (consequently, native oxides) make TMD-based thin film transistors (TFTs) that are immune to the short channel effect (SCE) and provide very high field effect mobility (${\sim}200cm^2/V-sec$ that is comparable to the universal mobility of Si), respectively.[2] In addition, an excellent photo-detector with a wide spectral range from ultraviolet (UV) to close infrared (IR) is achievable with using $WSe_2$, since its energy bandgap varies between 1.2 eV (bulk) and 1.8 eV (monolayer), depending on layer thickness.[3] However, one of the critical issues that hinders the successful integration of $WSe_2$ electronic and optoelectronic devices is the lack of a reliable and controllable doping method. Such a component is essential for inducing a shift in the Fermi level, which subsequently enables wide modulations of its electrical and optical properties. In this work, we demonstrate n-doping method for $WSe_2$ on poly-4-vinylphenol and poly (melamine-co-formaldehyde) (PVP/PMF) insulating layer and adjust the doping level of $WSe_2$ by controlling concentration of PMF in the PVP/PMF layer. We investigated the doping of $WSe_2$ by PVP/PMF layer in terms of electronic and optoelectronic devices using Raman spectroscopy, electrical measurements, and optical measurements.

  • PDF

Effect of Curing Conditions of a Poly(4-vinylphenol) Gate Dielectric on the Performance of a Pentacene-based Thin Film Transistor

  • Hwang, Min-Kyu;Lee, Hwa-Sung;Jang, Yun-Seok;Cho, Jeong-Ho;Lee, Shic-Hoon;Kim, Do-Hwan;Cho, Kil-Won
    • Macromolecular Research
    • /
    • 제17권6호
    • /
    • pp.436-440
    • /
    • 2009
  • We improved the performance of pentacene-based thin film transistors by changing the curing environment of poly(4-vinylphenol) (PVP) gate dielectrics, while keeping the dielectric constant the same. The field-effect mobility of the pentacene TFTs constructed using the vacuum cured PVP was higher than that of the device based on the Ar flow cured gate dielectric, possibly due to the higher crystalline perfection of the pentacene films. The present results demonstrated that the curing conditions used can markedly affect the surface energy of polymer gate dielectrics, thereby affecting the field-effect mobility of TFTs based on those dielectrics.

Self-aligned Graphene Passivation Method by Poly-4vinylphenol/Poly(melamine-co-formaldehy de) for Flexible and Wearable Electronics

  • 박형열;이인열;박진홍
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.473-473
    • /
    • 2013
  • 전자종이, 입을 수 있는 디스플레이, 플렉서블 터치 스크린, 투과성 면 등과 같은 차세대 플렉서블 투명 전자소자는 기계적으로 유연하고 광학적으로 투명하며 무게가 가벼운 특성을 지녀야 할 것으로 예상된다. 현재까지는Indium tin oxide (ITO), zinc tin oxide (ZTO), carbon nano tube (CNT)와 polyimide 계열의 물질들이flexible, wearable, and transparent electronics (FWTEs) 소자의 electrode, active channel, dielectric layers로 제안되어 활발히 연구되었다. 최근에는 높은 이동도(~200,000 cm2/Vs) 및 유연성(fracture strain of 30%), 투명도 (97.5% for monolayer)와 같은 특성을 갖는 그래핀에 대한 연구가 활발히 진행되고 있다. 그러나 그래핀을 차세대 플렉서블 투명 전자소자 구현에 적용하기 위해서는 플렉서블하고 투명한 절연체의 확보 및 그래핀의 진성(intrinsic) 특성 유지 등과 같은 문제점들을 해결해야 한다. 따라서, 본 연구팀에서는 그래핀 기반 플렉서블 투명 전자소자의 게이트 절연층으로 적합한 poly-4-vinylphenol/poly (melamineco-formaldehyde) (PVP/PMF) 물질을 제시하고 이에 대한 전기적 재료적 분석을 수행하였다. 특히 다양한 PVP와 PMF의 비율 및 가열(annealing 혹은 curing) 온도에서 형성된 PVP/PMF 층의 화학 및 전기적 특성을 FT-IR, I-V, 그리고 C-V 측정을 통해 확인하였다. PVP/PMF는 유기절연 물질의 하나로서 높은 유연성과 투명도를 갖고 있을 뿐만 아니라 그래핀에 적용 시 그래핀의 진성 특성을 확보할 수 있다. 이는 PVP/PMF에 존재하는 hydroxyl (-OH) 그룹과 그래핀 상에서 정공(hole)을 공급하는 것으로 알려져 있는 -OH 그룹들간의 cross-linking 메커니즘에 의한 것으로 예상된다. 마지막으로 최적화된 PVP/PMF (낮은 hysteresis 전압)를 게이트 절연층에 적용하여 polyethylene terephthalate (PET) 기판 및 연구원의 손가락 위에 95.8%의 투명도 및 0에 가까운 Dirac point를 갖는 그래핀 기반 플렉서블 투명 전자소자를 성공적으로 집적하였다.

  • PDF