• Polymer(Korea)
• /
• v.25 no.3
• /
• pp.385-390
• /
• 2001

The A-B-A type block copoly(ester-ether)s consisting of poly(L-lactic acid) (PLLA)(A) and poly(oxyethylene-co-oxypropylene)(B) were prepared to improve the mechanical properties and hydrolyzability of PLLA. The block copolymers showed an improved flexibility due to the incorporation of the soft segments. Then, the same copolymer has an improved anti-thrombogenicity probably due to the specific microphase separation structure in the surface. The AFM of the film of the block copolymer revealed that the surface was quite flat in comparison with that of PLLA. Therefore, the flatness of the surface may be related with the increased anti-thrombogenicity of the copolymer film.

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.257-258
• /
• 2007

See Full Text

• Macromolecular Research
• /
• v.17 no.9
• /
• pp.682-687
• /
• 2009

Nanofibrous membranes of poly(D,L-lactic acid)/chitin blend were prepared by electro spinning for a barrier of guided tissue regeneration. A miscible solution was obtained by the blending chitin-salt complex into 1-methyl-2-pyrrolidone solution of poly(D,L-lactic acid). The properties of the blend were examined for nanofibrous fabrication. The viscosity of the blend solution was increased significantly due to chain entanglement despite the low ratio of chitin to poly(D,L-lactic acid). An interaction between two polymeric compositions was confirmed by Fourier transform infrared spectroscopy. X-ray diffraction detected an appreciably ordered microstructure in the nanofiber of the blend. A membrane of thinner nanofibers was fabricated by electro spinning the chitin blend. The permeability of the membranes was examined using bioactive model compounds.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.227.2-228
• /
• 2003

In many biodegradable polymers recently investigated, poly(lactic acid)(PLA) or poly(lactic-co-glycolic acid)(PLGA) have extensively been utilized as drug delivery systems for sustained release drug delivery. Recently, there has been increased interest in electrospinning, which can produce fibers that are sub-micron in diameter. This technique has been applied to various micro/nano fabrication areas using numerous polymers but very few uses in the sharmaceutical area have been reported. (omitted)

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.431-436
• /
• 2000

To improve the thermal and mechanical properties of homo poly(L-lactic acid), DL-mandelic acid, one of the natural $\alpha$-hydroxy acid with aromatic ring as the side-chain residue was used as the comonomer. Copolymers with different contents of mandelic acid were prepared and characterized. The resulting copolymers were mostly amorphous. As the amount of mandelic acid in the monomer feed increased, the molecular weight of the resulting polymers tended to decrease linearly. T$_{g}$ and T$_{d}$ of the copolymer, however, were found to shift toward higher temperature, suggesting the improved thermal stability by increasing content of mandelic acid moiety. Tensile measurements of cast films showed somewhat improved values in the copolymers with mandelic acid content of 5 and 10 wt%.%.%.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.1
• /
• pp.13-22
• /
• 1996

Poly(D,L-lactic acid) (PLA) microspheres containing alprazolam(APZ) were prepared by a solvent-emulsion evaporation method and their release patterns were investigated in vitro. Various batches of microspheres with different size and drug content were obtained by changing the ratio of APZ to PLA, PLA concentration in the dispersed phase and stirring rate. Rod-like APZ crystals on microsphere surface, which were released rapidly and could act as a loading dose, were observed with increasing drug content. The release rate was increased with increase in drug contents and decrease in the molecular weight of PLA. The release rate of APZ for long-acting injectable delivery system in vitro, which would aid in predicting in vitro release profile, could be controlled by properly optimizing various factors affecting characteristics of microspheres.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.164-168
• /
• 2009

The effects of chemically modified thermoplastic starch (CMPS) on the morphology, thermal and mechanical properties of the blends of poly (lactic acid)(PLA) and poly(butylene adipate-co-terephthalate)(PBAT) were studied. Blends of PLA/PBAT with the CMPS contents of 10, 20 and 30 wt% on the basis of PLA/PBAT weight were prepared by a twin screw extruder. The morphology, thermal and mechanical properties of the blends were examined by using scanning electron microscope (SEM), differential scanning calorimeter (DSC) and a tensile tester. The DSC study revealed that PLA/PBAT blends are thermodynamically immiscible, while the compatibility was much improved by addition of the CMPS.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2006.11a
• /
• pp.38-40
• /
• 2006

• KSBB Journal
• /
• v.30 no.4
• /
• pp.161-165
• /
• 2015

Lactic acid and its derivatives are widely used in the food, pharmaceutical, and cosmetic industries. It is also a major raw material for the production of poly-lactic acid (PLA), a biodegradable and environmentally friendly polymer and a possible alternative to synthetic plastics derived from petroleum. For PLA production by new strains of lactic acid bacteria (LAB), we screened LAB isolates from shellfish. A total of 51 LAB were isolated from 7 types of shellfishes. Lactic acid production of individual isolates was examined using high-performance liquid chromatography using a Chiralpak MA column and an ultraviolet detector. Lactobacillus plantarum T-3 was selected as the most stress-resistant strain, with minimal inhibition concentrations of 1.2 M NaCl, 15% ethanol, and 0.0020% hydrogen peroxide. In a 1 L fermentation experiment, $\small{D}$-lactic acid production of 19.91 g/L fermentation broth was achieved after 9 h cultivation, whereas the maximum production of total lactic acid was 41.37 g/L at 24 h.

• Journal of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.203-210
• /
• 1990

As a possible biocompatible and biodegrable polymer skeleton for drug delivery system, block copolymers of L-lactic acid and L-glutamic acid with different composition were synthesized and characterized. Poly (L-lactide) was prepared by polymerization of L-lactide with zine oxide at $130^{\circ}C$ for 72 hrs. 3-Amino-l-propanol was introduced to poly (L-lactide) by an ester linkage in order to initiate polymerization. Polymerization of $\gamma-benzyl-L-glutamate-N-carboxyanhydride(\gamma-BLG-NCA)$ utiliizing the amino group of modified poly (L-lactide) as an initiator gave rise to the block copoly $(L-lactide-\gamma-benzyl-L-glutamate).$ The NMR study of resulting block copolymers showed that the composition of L-lactic acid and $\gamma-benzyl-L-glutamate$ in block copolymers was depended on the weight ratio of poly (L-lactide) and $\gamma-BLG-NCA.$ The thermal properties of the resulting block copolymers were determined by the differential scanning calorimetry and by the thermogravimetry.