• Macromolecular Research
• /
• 제15권4호
• /
• pp.330-336
• /
• 2007

Luminescent CdSe/ZnS QDs, with emission in the red region of the spectrum, were synthesized and encapsulated in poly(ethylene glycol)-poly(D,L-lactide) diblock copolymer micelles, to prepare water-soluble, bio-compatible QD micelles. PEG-PLA diblock copolymers were synthesized by ring opening polymerization of D,L-lactide, in the presence of methoxy PEG as a macro initiator. QDs were encapsulated with PEG-PLA polymers using a solid dispersion method in chloroform. The resultant polymer micelles, with encapsulated QDs, were characterized using various analytical techniques, such as UV- Vis measurement, light scattering, fluorescence spectroscopy, transmission electron microscopy (TEM) and atomic forced microscopy (AFM). The polymer micelles, with encapsulated QDs, were spherical and showed diameters in the range of 20-150 nm. The encapsulated QDs were highly luminescent, and have high potential for applications in biomedical imaging and detection.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.181-186
• /
• 2010

A thermoresponsive poly(NIPAM-co-dye) labeled with benzopyran-based D-$\pi$-A type dye was prepared by typical radical copolymerization. It can be also constructed a acid/base-induced molecular switch by modulation of intramolecular charge transfer with protonation/deprotonation. The lower critical solution temperature behavior was investigated by means of UV-vis spectroscopy which allows the measurement of the phase transition from $25^{\circ}C$ to $45^{\circ}C$ in aqueous DMSO solution. The morphology of the internal microstructure of the poly(NIPAM-co-dye) hydrogel was observed by scanning electron microscopy. The reversible switch could be obtained by thermal and acid/base stimuli.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.553-556
• /
• 1999

This paper presents a proper condition to achieve above 19 % conversion efficiency using PC1D simulator. Cast poly-Si wafers with resistivity of 1 $\Omega$-cm and thickness of 250 ${\mu}{\textrm}{m}$ were used as a starting material. Various efficiency influencing parameters such as rear surface recombination velocity and minority carrier diffusion length in the base region, front surface recombination velocity, junction depth and doping concentration in the Emitter layer, BSF thickness and doping concentration were investigated. Optimized cell parameters were given as rear surface recombination of 1000 cm/s, minority carrier diffusion length in the base region 200 ${\mu}{\textrm}{m}$, front surface recombination velocity 100 cnt/s, sheet resistivity of emitter layer 100 $\Omega$/$\square$, BSF thickness 5 ${\mu}{\textrm}{m}$, doping concentration 5$\times$10$^{19}$ cm$^3$ . Among the investigated variables, we learn that a diffusion length of base layer acts as a key factor to achieve conversion efficiency higher than 19 %. Further details of simulation parameters and their effects to cell characteristics are discussed in this paper.

• 폴리머
• /
• 제34권2호
• /
• pp.154-158
• /
• 2010

$\alpha$,$\omega$-Dichlorohexamethyltrisiloxane의 aniline과 고리 반응으로부터 N-phenylcyclotrisiloxazane($D_3^{NPh}$)을 합성하고 이를 hexamethylcyclotrisiloxane$D_3$과 이온 공중합시켜 poly(dimethylsiloxane-co-N-phenylsiloxazane)공중합체(PDMS-NPSOX)를 제조하였다. 이를 chloroethyl methacryalte에 도입하여 PDMS-NPSOX unit가 도입된 아크릴 단량체를 제조하였으며, 이를 MMA 및 n-butyl acrylate와 공중합시켜 PDMS-NPSOX가 도입된 삼원 아크릴 공중합체를 제조하고, 그 특성을 조사하였다. 단량체 조성은 생성 공중합체의 $T_g$가 25 $^{\circ}C$가 되도록 선택하여 공중합시켰다. 공중합체에서 PDMS만 도입된 경우 $T_g$가 20 $^{\circ}C$인데 비하여 PDMS-NPSOX unit이 도입됨에 따라 25 $^{\circ}C$로 증가되었으며 접착력도 1.76 N/cm에서 2.23 N/cm로 증가되었다.

• 분석과학
• /
• 제11권4호
• /
• pp.248-253
• /
• 1998

수용액에서 poly-dibenzo-18-crown-6를 이용한 알칼리, 알칼리토금속이온 및 전이금속이온들의 흡착 및 분리특성을 조사하였다. 알칼리금속이온들과 알칼리토금속이온들의 흡착정도와 분포비의 순위는 각각 Li(I)

• 전자공학회논문지C
• /
• 제36C권1호
• /
• pp.49-58
• /
• 1999

본 논문에서는 통과 대역폭이 5KHZ, ripple이 0.1dB이하인 스위치드 캐패시터(Switched Capacitor) 필터를 $0.8{\mu}m$ single poly CMOS ASIC 표준 공정을 이용하여 집적화된 단일 칩으로 제작하였다. 제안된 5차 타원 저역 통과 필털의 구성은 MOS 스위치와 poly 캐패시터, 5개의 2단 CMOS op-amp로 구성하였다. 필터구현은 LC 수동형으로부터 연속전달함수 H(s)를 구하고 쌍선형 z변환을 통하여 이산전달함수 H(z)으로 바꾸어 2차 바이쿼드(biquad)를 종속 연결하는 빌딩블록 방식을 택하였다. 또한 op-amp의 구동범위를 고려하면서 캐패시터 면적을 감소시킨 스케일링 실시한 동일 특성의 필터를 제작하여 그 특성 변화를 비교, 분석하였다. 측정결과 ${\pm}2.5V$ 전원, 50KHz의 표본 주파수에서 2종의 필터 모두 4.96~4.98KHz의 통과 대역폭에 0.7~0.81dB의 리플, 35~38dB정도의 저지대역 이득감쇠 특성을 보였다.

• 한국환경과학회지
• /
• 제23권3호
• /
• pp.473-481
• /
• 2014

Poly(lactide)s(PLA) is an attractive material to solve the problem of waste plastic accumulation in nature because of its biodegradability. The lactide exists in three stereoisomeric configurations: L-lactide, D-lactide, and meso-lactide. PLA stereocomplexes, formed by the mixing of two enantiomers, poly(L-lactide)(PLLA) and poly(D-lactide)(PDLA), have many favorable characteristics because the stereocomplex showed $50^{\circ}C$ higher melting point than each enantiomeric polymer and the resistance toward degradation increased. In this study, we investigated the influence of the composition and the optical purity of each component on the formation of stereocomplexes. Also, the nanofibers of stereochemical PLA and their blends were prepared by electrospinning method. The properties of the obtained fibers were analyzed by differential scanning calorimetry and scanning electron microscopy. The results showed that a degree of stereocomplex was controlled by change of optical purity of each component. The enzymatic degradation of the fibers were strongly dependent on the stereocomplex.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.348-349
• /
• 2007

This paper describes the electrical characteristics of polycrystalline (poly) 3C-SiC thin film diodes, in which poly 3C-SiC thin films on n-type and p-type Si wafers, respectively, were deposited by APCVD using HMDS, Hz, and Ar gas at $1180^{\circ}C$ for 3 hr. The schottky diode with Au/poly 3C-SiC/Si(n-type) structure was fabricated. Its threshold voltage ($V_d$), breakdown voltage, thickness of depletion layer, and doping concentration ($N_D$) values were measured as 0.84 V, over 140 V, 61nm, and $2.7\;{\times}\;10^{19}\;cm^3$, respectively. The p-n junction diodes fabricated on the poly 3C-SiC/Si(p-type) were obtained like characteristics of single 3C-SiC p-n junction diodes. Therefore, poly 3C-SiC thin film diodes will be suitable microsensors in conjunction with Si fabrication technology.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.235-238
• /
• 2004

본 연구는 반도체소자 제조공정에 적용되는 CMP공정 중 LPP(Landing Plug Poly) Contact간의 소자 분리를 위해 진행되는 LPP CMP의 후 세정 과정에서 유발되는 방사형 Defect 제거에 관한 내용이다. 방사형 Defect은 LPP CMP 후에 노출되는 BPSG, Poly, Nitride Film과 연마재로 사용되는SiO2 입자, 후 세정과정에서 적용되는 SC-1, DHF, $NH_4OH$ Chemical과 Brush와의 상호작용에 의해 발생되며, Cleaning시의 산성 분위기 하에서 각 물질간의 pH와 Zeta Potential의 차이에서 기인한다. 이 Defect을 제거하기 위해 LPP CMP후에 Film 표면에 노출되는 각 물질의 표면 특성과 CMP 후 오염입자의 흡착과 재 흡착에 영향을 미치는 Electrostatic force와 Van der Waals force, PVA Brush에 의한 Mechanical force의 상호작용을 고려하여 최적 후 세정 조건을 제시 하였다.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.63-68
• /
• 2015

Recently, 3D printer technologies have been used in many research efforts for high precision manufacturing. In particular, the rapid prototyping technology has been developing rapidly, because it can be manufactured in a short time with a 3D designed shape. This paper relates to the production characteristics of the straight bevel gear designed using a 3D print using the PolyJet method. The characteristics of a 3D printed straight bevel gear were compared with a machined straight bevel gear. The accuracy of the produced straight bevel gear was evaluated by backlash, meshing pattern, face angle, root angle, and surface roughness.