• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.54-57
• /
• 1998

Recently, Manley's group published several papers on the blend of PVDF and poly(1, 4-butylene adipate) (PBA) chosen as a model system of somicrystallineisemicrystalline polymer blend.[1-4]. This blend system has several advantages over the other PVDF/semicrystalline polymer blends.(omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.7-8
• /
• 2003

Since PVDF/poly(1,4-butylene adipate) blend shows much lower LCST curve compared with PVDF/PMMA blend, the PVDF/PBA blend can be a good candidate for investigating the effect of the electric field on the phase separation and dissolution behavior of an electro-active polymer and electro-inactive polymer blend. (omitted)

• Korean Journal of Environmental Biology
• /
• v.27 no.2
• /
• pp.198-204
• /
• 2009

From leaf mold and reclamation site soil of the Capital area of Korea, 3 poly(butylene succinate-co-butylene adipate: PBSA)-degrading strains were isolated through the clear zone test. The PBSA-degrading activities of the strains were assessed by means of a modified Sturm test using 0.01% of PBSA film as a sole carbon source. After the modified Sturm tests for 40 days at the respective isolation temperatures, the 3 strains degraded 30%, 55% and 43% of PBSA, respectively. The isolated strains were identified to be Burkholderia cepacia PBSA-4, Bacillus licheniformisPBSA-5 and Burkholderia sp. PBSA-6 through the 16S rDNA gene sequence analysis. Among them, PBSA-5 degraded both PBSA and Poly(vinyl alcohol). The degradation activity of the PBSA degrading strains appeared to be high at moderate temperatures such as $27^{\circ}C$ and $37^{\circ}C$, and initial inoculum size of $10^{10}cfu\;mL^{-1}$ degraded PBSA 1.2~1.3 more times than that $10^9cfu\;mL^{-1}$. Addition of 0.1 or 0.5% (w/w) of gelatin, yeast extract and ammonium sulfate raised the PBSA degrading activity, and especially addition of 0.1% (w/w) of gelatin enhanced the PBSA degrading activity by more than 33%. The mixed strains degraded PBSA faster than the single strain.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.188-194
• /
• 2003

Phase behavior and spinodal phase separation kinetics in binary blends of a random copolymer of vinylidene fluoride and trifluoroethylene (75/25) [P(VDF/TrFE)] and poly(l,4-butylene adipate) (PBA) have been investigated by means of optical microscopic observation and time-resolved light scattering. The blends exhibited a typical lower critical solution temperature (LCST)∼${34}^{\circ}C$ above the melting temperature of the P(VDF/TrFE) crystals over the entire blend composition range. P(VDF/TrFE) and PBA were totally miscible in the temperature gap between the melting point of P(VDF/TrFE) and the LCST. Temperature jump experiments of the 3/7 P(VDF/TrFE)/PBA blend were carried out on a light-scattering apparatus from a single-phase melt state (${180}^{\circ}C$) to a two-phase region (205∼${215}^{\circ}C$). Since the late stage of spinodal decomposition (SD) is prevalent in the 3/7 blend, SD was analyzed using a power law scheme. Self-similarity was preserved well in the late stage of SD in the 3/7 blend.

• Advances in concrete construction
• /
• v.11 no.4
• /
• pp.323-333
• /
• 2021

The main objective of this study is to characterize and evaluate the hydrophobic performance of polymer-based water-repellent coatings on cementitious mortar surfaces. Different concentrations of poly(vinyl acetate) (PVAc) and poly(1,4-butylene adipate) (PBA) were prepared in the laboratory and their applicability and performance was tested experimentally by water absorption test and analysis of surface contact angles of cementitious mortar specimens. According to the results of this study, it can be stated that incorporation of nano polymer particles on the surface of cementitious mortar specimens can enhance contact angles and reduce water absorption by increasing hydrophobicity. However, a dosage limit exists for polymer materials in coating, and observed hydrophobic improvements decreases when polymer dosage reached beyond the limit. Additionally, it is observed that water absorption of polymer coated cementitious mortars is closely related with the results of surface contact angle.

• Proceedings of the Korean Fiber Society Conference
• /
• 2000.04a
• /
• pp.347-350
• /
• 2000

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.193-194
• /
• 2003

전기활성 고분자인 poly(vinylidene fluoride)(PVDF)를 전기 비활성 고분자와 블렌드시키는 경우 어떤 블렌드계에서는 용융 온도 이상에서 LCST(lower critical solution temperature) 상분리 거동을 나타내는데[1,2], 이때 외부 전장을 가해주면 이들의 상분리 거동에 영향을 미칠 수 있다[3]. PVDF와 블렌딩시켰을 때 LCST 상분리 거동을 나타내는 고분자로는 poly(methyl methacrylate), poly(ethyl methacrylate), poly(1,4-butylene adipate) (PBA) 등이 있다[l,3]. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.207-210
• /
• 2002

PVDF는 측쇄에 C=O기를 갖는 고분자인 PMMA와 PVAc와의 블렌드 및 주쇄에 C=O기를 갖는 poly(1,4-butylene adipate) (PBA)와의 블렌드에서 PVDF의 융점보다 상당히 높은 온도에서 LCST거동을 보이고 있음이 알려져 있다. 그런데 PVDF/PMMA와 PVDF/PVAC 블렌드계에서는 LCST가 고분자의 열분해온도와 유사하여 LCST거동을 실험적으로 관찰하기 어려웠다. 그런데 PVDF/PBA 블렌드계에서는 실험적으로 측정할 수 있을 정도로 LCST가 낮아지긴 하였지만 PBA의 열분해를 완전히 배제하기엔 아직도 높은 온도이다.[1] (중략)

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.104-111
• /
• 2013

Poymer blends of two degradable aliphatic polyesters, relatively expensive material polylactic acid (PLA) and relatively inexpensive material poly(butylene adipate-co-terephthalate) (PBAT), were used in this study. Three different kinds of modifiers were used with various amounts. Diisocyanate type methylenediphenyl 4,4'-diisocyanate (MDI) and hexamethylene diisocyanate (HDI) were used as modifiers and epoxy type coupling agents also used. The melt flow index (MFI) and dynamic viscoelasticity of various compositions of PLA/PBAT blends were studied. The mechanical property and morphology with respect to the fracture surface of PLA/PBAT blends were also investigated using tensile test and field emission scanning electronic microscopy, respectively. These tests were also used to verify the compatibility of PLA/PBAT and the effect of mechanical properties due to the use of modifiers. Tensile properties of PLA/PBAT blends modified with HDI were improved remarkably.

• Korean Journal of Environmental Biology
• /
• v.28 no.2
• /
• pp.95-100
• /
• 2010

Burkholderia cepacia PBSA-7, Bacillus licheniformis PBSA-8 and Burkholderia sp. PBSA-9 previously collected from Korea soil (Joo and Kim, 2009) were analyzed for the presence of genes encoding proteins operative in the degradation of poly(butylene succinate-co-butylene adipate; PBSA). Polymerase chain reaction analyses revealed a 1.5 kb fragment of the lipase gene (lip A) in B. cepacia PBSA-7 and Burkholderia sp. PBSA-9, while B. licheniformis PBSA-8 harbored the same gene fragment at 600 bp. The three strains possessed "Gly-X1-Ser-X2-Gly" and "Ala-X1-Ser-X2-Gly" lipase sequence regions. Burkholderia sp. PBSA-7 lip A displayed 36~40% homology with the family 1-1 lipases and 82~92% homology with the family 1-5. Burkholderia sp. PBSA-8 lip A was 64~65% homologous with the subfamily 1-4 lipases, but displayed no homology with the subfamily 1-5 lipases. Burkholderia sp. PBSA-9 lip A displayed 35~37% homology with the family I1 lipases and 83~94% homology with the family I2 lipases, similar to Burkholderia sp. PBSA-7.