• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.489-496
• /
• 2002

This study proposes a new polling algorithm allowing dynamic change in polling period based on line utilization prediction. Polling is the most important function in network monitoring, but excessive polling data causes rather serious congestion conditions of network when network is In congestion. Therefore, existing multiple polling algorithms decided network congestion or load of agent with previously performed polling Round Trip Time or line utilization, chanced polling period, and controlled polling traffic. But, this algorithm is to change the polling period based on the previous polling and does not reflect network conditions in the current time to be polled. A algorithm proposed in this study is to predict whether polling traffic exceeds threshold of line utilization on polling path based on the past data and to change the polling period with the prediction. In this study, utilization of each line configuring network was predicted with AR model and violation of threshold was presented in probability. In addition, suitability was evaluated by applying the proposed dynamic polling algorithm based on line utilization prediction to the actual network, reasonable level of threshold for line utilization and the violation probability of threshold were decided by experiment. Performance of this algorithm was maximized with these processes.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.10
• /
• pp.720-726
• /
• 2004

The data transmission over MVB(Multifunction Vehicle Bus) of TCN(Train Communication Network) is divided into the periodic transmission phase and the sporadic transmission phase. TCN standard recommends the event-polling method as the message transfer in the sporadic phase. However, since the event-polling method does not use pre-scheduling to the priority of the messages, it is inefficient for the real-time systems. To schedule message transmission, a master node should know the priority of message to be transmitted by a slave node prior to the sporadic phase, but the existing TCN standard does not support any protocol for this. This paper proposes the slave frame bit-stuffing algorithm, with which a master node gets the necessary information for scheduling and includes the simulation results of the event-polling method and the proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2198-2202
• /
• 2003

The data transmission of MVB(Multifunction Vehicle Bus) of TCN(Train Network Communication) is divided into the periodic transmission phase and the sporadic transmission phase. TCN standard defines the event-polling method for the message transfer in the sporadic phase. However, since the event-polling method does not use pre-scheduling to the priority of the messages to be transmitted, it is inefficient for the real-time systems. To schedule message transmission, a master node should know the priority of message to be transmitted by a slave node prior to the scheduling the sporadic phase, but the existing TCN standard does not support any protocol for this. This paper proposes the slave frame bit-stuffing algorithm, with which a master node gets the necessary information for transmission scheduling and includes the simulation results of the event-polling method and the proposed algorithm.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1627-1630
• /
• 2002

본 논문은 역추적 예견 알고리즘을 사용한 비터비 복호기에서의 TB단의 Polling 구조의 단순화 방법을 제시한다. 비터비 복호기의 3대 Unit중 하나인 Trace Back에서 역추적 예견 알고리즘을 사용할 경우 복호화 시점에서의 최소 State Metric 값을 찾아야 하는 번거로움을 줄일 수 있다. 하지만 복호 신호의 신뢰도 분산에 따라 Polling Unit 이 추가되어야 함에 따라 실제 하드웨어 복잡도에서의 이득은 미미한 것으로 알려져 있다. 제시된 구조에서는 Polling Unit을 단순화 할 수 있는 방법을 적용하였다. 기존 하드웨어와의 비교 평가를 위하여 IEEE802.11a의 표준에 따른 부호화율 1/2, 구속장 7을 갖는 비터비 디코더에 대하여 역추적 예견 알고리즘과 파이프라인 구조만을 갖는 경우와 제안된 단순화한 Polling Unit을 적용한 구조와의 비교에서 Trace Back Unit에서 약 45%의 감소 효과를 보였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1013-1017
• /
• 2005

This paper proposes an effective algorithm, P-DCF(Polling DCF) to satisfy real-time requirements in the industrial environments, based on 802.11 DCF protocols. Theoretical analysis and actual experiments are carried out, which shows that the proposed P-DCF brings several benefits: 1) it reduces the time delay for frame transmission 2)it guarantees bounded upper limit of maximum transmission delay 3) it maintains fairness

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.99-109
• /
• 2007

IEEE 802.lie is being proposed to improve QoS by IEEE 802.11 working group. HCCA (HCF Controlled Channel Access) a centralized polling based mechanism of IEEE 802.11e, needs a scheduling algorithm that decides on how the available radio resources are allocated to the polled STAs. In IEEE 802.l1e standard Reference Scheduler is presented. Reference Scheduler Polls all STAs in a polling list by the same interval that causes ineffectively frequent polling. It increases not only the overhead but it decreases the TXOP (Transmission Opportunity) utilization. In this paper, we propose the scheduling and admission control algorithm that poll stations depending on the MSI (Maximum Service Interval)o( stations to solve these shortcomings. In our proposed algorithm a station is polled by an interval close to its MSI, so polling overhead decrease and TXOP utilization increases than Reference Scheduler. Simulation results show that our algorithm outperforms Reference Scheduler. Our algorithm maintains higher aggregate throughput and services mere stations than Reference Scheduler.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.355-356
• /
• 2006

• Journal of Communications and Networks
• /
• v.9 no.1
• /
• pp.43-49
• /
• 2007

The implementation of client polling as a weak cache coherence mechanism has two major drawbacks: Firstly, the cache may return a stale copy if the object is changed in the origin server while the cached copy is considered valid. Secondly, the cache can invalidate a cached copy that is still valid in the server. Therefore, we propose a multilevel pre-fetching (MLP) in conjunction with the client polling to refine these drawbacks. MLP is introduced to improve the level of freshness among the cached objects. The simulation results presented in this paper show that the proposed MLP significantly minimizes the number of stale objects and reduces the invalidation messages sent out to the server, i.e., increase the cache HIT rate.

• The KIPS Transactions:PartC
• /
• v.16C no.4
• /
• pp.477-486
• /
• 2009

This paper proposes a dynamic bandwidth allocation (DBA) algorithm with adaptive maximum transmission window (DBA-AMTW) to increase channel utilization in Ethernet passive optical networks (EPONs). A polling mechanism in EPON determines channel utilization and puts constraints on DBA algorithm and scheduling. DBA algorithms based on interleaved polling with stop (IPS) allocate transmission windows to optical network units (ONU) considering requests of all ONUs. However channel idle time when any ONU does not transmit packets decreases channel utilization. Proposed DBA-AMTW improves efficiency of a network and allocates transmission windows effectively by appropriate DBA computation from REPORT messages of all ONUs. An adaptive maximum transmission window for each ONU determined by a DBA computation in the previous scheduling cycle. Simulation results show that the proposed DBA algorithm improves performance of throughput and average delay time.

• Journal of KIISE:Databases
• /
• v.37 no.1
• /
• pp.22-32
• /
• 2010

Location-based services have been expanded rapidly in local and overseas markets due to technological advances and increasing applications of wireless internet. Various researches have been made to manage efficiently the location information of moving objects. A basic location-based alert service provides alerting messages automatically when either entering or leaving a specific location and it is expected to become one of the most important location-based services. Location-based alert services require a location polling method to acquire current locations for a large number of moving objects. However, a simple periodical location polling method causes severe system overload because a system should keep updating location information of the moving objects ceaselessly. Most location polling algorithms for location-based alerting services are not suitable for mobile users with dynamic and unsteady moving patterns. In this paper, we propose an improved location polling algorithm for location-based alerting services to reduce the amount of location information acquisition and therefore, to decrease the system load. Various experiments show that the proposed algorithm outperforms other algorithms.