• 제목/요약/키워드: Polishing method

검색결과 428건 처리시간 0.028초

타이타늄의 표면거칠기가 도재의 결합강도에 미치는 영향 (EFFECT OF SURFACE ROUGHNESS ON BOND STRENGTH IN TITANIUM-PORCELAIN SYSTEM)

  • 김상훈;방몽숙;양홍서;박상원;박하옥;임현필;오계정
    • 대한치과보철학회지
    • /
    • 제45권2호
    • /
    • pp.182-190
    • /
    • 2007
  • Statement of problem: Titanium has many advantages of high biocompatibility, physical properties, low-weight, low price and radiolucency, but it is incompatible with conventional dental porcelain due to titanium's oxidative nature. Many previous studies have shown that they used the method of sandblast for surface treatment prior to porcelain application, the researches are processing about the method of acid etching or surface coating. Purpose: The purpose of this research is to study the effect on bond strength of surface roughness between titanium and porcelain with the same surface topography. Material and method: In this study, we evaluated the bond strength by using 3-point bending test based on ISO 9693 after classified 8 groups - group P : polished with #1200 grit SiC paper, group S10 : $1.0{\mu}m$ surface roughness with sandblasting, group S15 : $1.5{\mu}m$ surface roughness with sandblasting, group S20 : $2.0{\mu}m$ surface roughness with sandblasting, group S25 : $2.5{\mu}m$ surface roughness with sandblasting, group S30 : $3.0{\mu}m$ surface roughness with sandblasting, group S35 : $3.5{\mu}m$ surface roughness with sandblasting, group E : $1.0{\mu}m$ surface roughness with HCl etching. Results: Within the confines of our research, the following results can be deduced. 1. In the results of 3-point bending test, the bond strength of sandblasting group showed significant differences from one of polishing group, acid etching group(P<.05). 2. The bond strength of sandblasting groups did not show significant differences. 3. After surface treatments, the group treated with sandblasting showed irregular aspect formed many undercuts, in the SEM photographs. The bond strength of sandblasting group was higher than 25 MPa, the requirement of ISO 9693. Conclusion: In above results, bond strength of titanium and low-fusing porcelain is influenced more to surface aspect than surface roughness. And titanium has clinically acceptable bond strength below surface roughness of $3.5{\mu}m$.

부산지역(釜山地域) 개업치과(開業齒科)의 치과보철물(齒科補綴物)에 관(關)한 만족도(滿足度) 조사(調査)(I) - 일부정식 치과 보철물에 관하여 - (A Study on Satisfaction of Practicing Dentists about Prosthesis in Pusan Part I : About Fixed Prosthetic appliances)

  • 이명곤
    • 대한치과기공학회지
    • /
    • 제10권1호
    • /
    • pp.159-169
    • /
    • 1988
  • Fixed prosthetic appliance is the restorations of damaged teeth with cast metal or porcelain, and of replacing missing teeth with fixed, or cemented prosthesis. Successfully treating a patient by means of fixed prosthodontics requires the thoughtful combination of dentist and dental laboratory technician. In order to know the satisfaction of dentisits about fixed prosthetic appliances-porcelain, precious and non precious metal-, this study was conducted for 69 practicing dentisis in Pusan during Fed. to Mar. 1988 using a questionnaire method and was analyzed by the use of percentage, $X^2$-test The results are obtained as follow: 1. General characteristics of the respondents, The rate of age distribution of practcing dentists responded was as follow : 31$\sim$35 age group is 29.0%, 51$\sim$55age group 18.8%, 41$\sim$45 age group and 46$\sim$50 group each 11.6%, 36$\sim$40 age group and 56$\sim$60 age group 8.7%, over 60 age group 7.3%, below 30 age group 4.3% respectively. The tate of term of practice experience distribution of dentists responded was as follow : 6$\sim$10 year group 26.1%, 25$\sim$25year group 18.8%, 11$\sim$15 years group and 16~20 years group each 13.0%, below 5 years group and over 30 years group each 10.2%, 26$\sim$30 years group 8.7% in order. The rate of respondents’ degree was follow : bachelor group 81.2%, doctor group 13.0%, master group 5.8% in order. The rate of respondents’completed medical specialist course was as follow : non-complete group 75.4%, complete group 24.6%. The rate of having own laboratory in respondents’clinic was as follow : no having own laboratory group 58.0%, having own labiratory group 42.0% The rate of being lab. technician in respondent;s clinic was as follow: non-being lab. technician group 91.3%, being lab. technician group 8.7%. The rate of transactional commercial dental lab. numbers was as follow : I dental lab. group 40.6%, 2 dental lab. group 30.4%, 3 dental lab. group 20.3%, production at own lab. group 8.7% 2. Cognitions about the respondent's job, About cognition of patient numvers, there were neither many nor few group 62.3%, few group 17.4%, many group 15.9%, too many group 4.4% in order.(P<.01) As compared with the ratio of dentists to patient prothetic treatment, there were moderate level group 46.4%, high level group 33.6%, low level group 18.8% in order.(P<.01) By job satisfaction of respondents, the highest percentage group was satisfied group 44.9%, neither astisfied nor disstified group 33.3%, dissatisfied group 14.5%, much satisfied group 7.3%(P<.01). As compared with the level of prosthetics price, the were moderate level group 71.0%, low level group 23.2%, high level group 5.8%(P<.01) 3. Satisfaction and assessment of dissatisfied factor of the fixed prosthetic appliance, As compared with the satisfaction of al prosthetic appliance, there were neither satisfied nor dissatisfied group 59.4%, satisfied group 20.3% dissatisfied group 18.8%, much satisfied group 1.5% in order.(P<.01). About precious and non precious metal crown and bridge, there were neither satisfied nor dissatisfied group 60.9%, satisfied group 24.6%, dissatisfied group 11.6%, much satisfied group 2.9% in order.(P<.01) The reat of respondent;s satisfaction about porcelain crown and bridge was as follow : neither satisfied nor dissatisfied group 43.5%, dissatisfied group 33.3%, satisfied group 21.7%, much satisfied group 1.5%(P<.01). The rate of respondent's dissatisfied factor item of precious and non precious metal crown and bridge was as follow : inadequate margin fit item 39.1% respondent, inadequate occlusion item 24.6%, inadequate adaptation item 23.2%, poor anat omic form item 15.9%, inadequate contact item 31.9%, improper polishing item 4.4%, the rest item 11.6% respectively. The rate of respondent's dissatisfied factor item of porcelain crown and bridge was as follow : inadequate margin fit item 52.2%, inadequate occlusion item 2.9%, inadequate adaptation item 10.1%, poor anatomic form item 11.6%, improper polishing item 1.5%, shade mismatching item 71%, the rest item 7.2% respectively. The rate of cognition of respondents’ about cause of dissatisfied factor on fixed prosthetic appliance by item was as follow : deficiency of sincerity item 55.1%, deficiency of knowledge about work item 47.8%, deficiency of experience item 15.9%, poor quality of using material item 5.8%, the rest item 2.9% respectively.

  • PDF

미세 배선 적용을 위한 Ta/Cu 적층 구조에 따른 계면접착에너지 평가 및 분석 (Effect of Ta/Cu Film Stack Structures on the Interfacial Adhesion Energy for Advanced Interconnects)

  • 손기락;김성태;김철;김가희;주영창;박영배
    • 마이크로전자및패키징학회지
    • /
    • 제28권1호
    • /
    • pp.39-46
    • /
    • 2021
  • Cu 배선(interconnect) 적용을 위한 다층박막의 적층 구조에 따른 최적 계면접착에너지(interfacial adhesion energy, Gc) 평가방법을 도출하기 위해, Ta, Cu 및 tetraethyl orthosilicate(TEOS-SiO2) 박막 계면의 정량적 계면접착에너지를 double cantilever beam(DCB) 및 4-점 굽힘(4-point bending, 4-PB) 시험법을 통해 비교 평가하였다. 평가결과, Ta확산방지층이 적용된 시편(Cu/Ta, Cu/Ta/TEOS-SiO2)에서는 두 가지 평가방법 모두 반도체 전/후 공정에서 박리가 발생하지 않는 산업체 통용 기준인 5 J/㎡ 보다 높게 측정되었다. Ta/Cu 시편의 경우 DCB 시험에서만 5 J/㎡ 보다 낮게 측정되었다. 또한, DCB시험 보다 4-PB시험으로 측정된 Gc가 더 높았다. 이는 계면파괴역학 이론에 따라 이종재료의 계면균열 선단에서 위상각의 증가로 인한 계면 거칠기 및 소성변형에 의한 에너지 손실이 증가 하는것에 기인한다. 4-PB시험결과, Ta/Cu 및 Cu/Ta계면은 5 J/㎡ 이상의 높은 계면접착에너지를 보이므로, 계면접착에너지 관점에서는 Ta는 Cu배선의 확산방지층(diffusion barrier layer) 및 피복층(capping layer)으로 적용 가능할 것으로 생각된다. 또한, 배선 집적공정 및 소자의 사용환경에서 열팽창 계수 차이에 의한 열응력 및 화학적-기계적 연마 (chemical mechanical polishing)에 의한 박리는 전단응력이 포함된 혼합모드의 영향이 크므로 4-PB 시험으로 측정된 Gc와 연관성이 더 클 것으로 판단된다.

열처리가 Ni-Cr 합금으로 제작된 하부구조물의 변연 및 내면 간격에 미치는 영향 (Effect of heat treatment of core fabricated by Ni-Cr alloy on marginal and internal fit)

  • 김재홍;김기백;정재관
    • 한국산학기술학회논문지
    • /
    • 제18권9호
    • /
    • pp.244-250
    • /
    • 2017
  • 보철물의 완성도를 평가할 수 있는 요소는 여러 가지가 있으나, 그 중 가장 중요한 하나는 보철물의 적합도이다. 합금은 기계적, 물리적 성질 그리고 연마성 개선을 위해 연화열처리나 경화열처리 과정을 거치는데, 이때의 열처리 방법이 Ni-Cr 합금 core의 변연 및 내면 간격에 어떠한 영향을 미치는지 알아보고자 한다. 실험을 위해 하악 좌측 대구치가 지대치인 석고 모형 30개를 제작하고 dipping법을 이용하여, 3 group(A, B, C)으로 나누어 group당 10개, 총 30개의 Ni-Cr 합금 core를 제작 하였다. 이들을 열처리를 하지 않은 것과 연화, 경화 열처리 방법으로 열처리함에 따라 적합도를 silicone replica technique을 이용하여 측정하였다. 세 집단 간의 평균값에 유의한 차이가 있는지 알아보기 해 독립표본 t-검정으로 분석하였다(${\alpha}=0.05$). 실험 결과 변연 부위(1, 6)에서는 통계적으로 유의한 차이를 보였으나(p<0.05), 나머지 내면 부위(2, 3, 4, 5)에서는 유의한 차이를 보이지 않았다(p>0.05). 이러한 결과로 미루어 볼 때 Ni-Cr 합금은 열처리를 하지 않는 것이 적합도 측면에서 나을 것으로 사료된다. 이에 추가적인 임상적용 연구를 통해 더욱 심도 있는 평가되어야 할 것으로 판단된다.

보리의 가공기술 개선연구 II. 쌀보리의 할맥가공특성과 취반성 (Studies on Processing Techniques in Barley II. The Processing and Cooking Quality of Cut-polished Barley in Naked Barley)

  • 김영상;장학길;박노풍
    • 한국작물학회지
    • /
    • 제33권3호
    • /
    • pp.287-291
    • /
    • 1988
  • 1981년 전남지방에서 생산된 쌀보리 '영산보리'를 공시하여 일반보리쌀은 농업기술연구소에 설치되어 있는 표준도정시설로, 할맥은 맥류연구소에서 확립된 할맥가공방법으로 가공하여 도정수율, 입형, 소요전력, 화학성분 그리고 취반특성을 구명한 결과는 다음과 같다. 1. 도정율은 일반보리쌀이 70.10%인데 비하여 할맥이 68.27% 였다. 2. 입장/입폭비율은 할맥이 2.88인데 일반보리 쌀이 1.36이었으며 천립중은 할맥이 9.5g인데 일반보리쌀이 18.5 g 이었다. 3. 가공중 소요전력은 일반보리쌀이 91.1 kW/1.000kg인데 비하여 할맥이 105.1 kw/1,000 kg 으로 할맥가공에서 140.0kW/1,000 kg 더 많이 소요되었다. 4. 단백질, MgO 함량은 할맥이 일반보리쌀에서 보다 높았으나, P$_2$O$_{5}$, $K_2$O 및 Mn은 거의 차가 없었다. 5. 취반후 백도의 차이는 일반보리쌀이 45.5%, 할맥이 49.5%, 수분흡수율은 일반보리쌀이 225.7%, 할맥이 312.7 %, 팽윤성은 일반보리쌀이 283%, 할맥이 318%로 할맥이 일반보리쌀보다 각각 4.0, 87.0 및 35% 높았다.및 35% 높았다.

  • PDF

제분방법에 따른 찰수수 가루의 품질 특성 (Impact of Milling Method on Quality Parameters of Waxy Sorghum Flour)

  • 류복미;김창순
    • 한국식품조리과학회지
    • /
    • 제29권2호
    • /
    • pp.129-135
    • /
    • 2013
  • 분쇄방법(핀밀, 초미분쇄)을 달리하여 제분한 찰수수가루의 물리화학적 특성을 조사하였다. 조단백질 함량은 PS와 UFS에서 높았고, 조지방 함량은 핀밀분쇄보다 초미분쇄에서 더 높게 나타났다. 조회분과 총 식이섬유소 함량은 도정하지 않고 핀밀분쇄한 PWS에서 가장 높았다. 겉보기 아밀로오스 함량은 핀밀분쇄한 수수가루가 초미분쇄한 수수가루보다 높았으며 껍질이 없는 경우(PS, UFS) 아밀로오스 함량이 더 낮게 나타났다. 수수가루의 평균입도크기는 도정하지 않은 수수가루에서 컸으며 핀밀분쇄한 것이 초미분쇄보다 평균입도가 큰 것으로 나타났다. 수수가루의 색도는 초미분쇄 수수가루가 핀밀수수가루보다 밝았으며 UFS의 L값이 가장 높았고, 도정한 수수가루(PS, UFS)가 통곡수수(PWS, UFWS)보다 명도가 높았다. 수분결합력은 초미분쇄 시료 UFWS에서 가장 높았으며 핀밀분쇄 PWS보다 높았다. 용해도와 팽윤력은 초미분쇄한 시료가 핀밀분쇄 시료에 비해 모두 높게 나타났으며 도정한 수수가루에서 높게 나타났다. 수수가루의 손상전분 함량은 핀밀분쇄하여 도정한 경우 손상도가 컸다. 수수가루의 호화점도 특성에서 최고점도와 최종점도 PS와 PWS에서 높았고 UFS는 가장 낮은 점도를 나타내었다. 노화도를 나타내는 setback 점도 또한 PS와 PWS에서 높아 초미분쇄보다 노화도가 높게 나타났다. 핀밀분쇄한 통곡 수수가루(PWS)가 전체적으로 높은 호화점도곡선을 보였다. 총 페놀 함량은 핀밀분쇄 수수가루가 초미분쇄 수수가루보다 높았으며 통곡 수수에서 높게 나타났다. 이러한 결과들로 보아 수수는 도정 여부와 분쇄 방법에 따라 가루의 물리화학적 특성이 달라지므로 수수가루를 이용한 제품 개발 시 각 제품의 특성에 따른 적절한 제분방법이 필요하다고 할 수 있다.

SiC를 이용한 대구경 위성용 망원경 제작 (Development of a Silicon Carbide Large-aperture Optical Telescope for a Satellite)

  • 배종인;이행복;김정원;이경묵;김명훈
    • 한국광학회지
    • /
    • 제33권2호
    • /
    • pp.74-83
    • /
    • 2022
  • 위성 관측 카메라용 대구경 초경량 반사광학계를 제작하기 위해 소재 개발부터 최종 시스템 인증시험까지 전 과정을 수행했다. 완성된 비점보정 3반사경 구조의 위성용 반사광학계 망원경은 주반사경의 구경이 700 mm이고, 망원경 전체 질량은 66 kg이다. 광학소재 및 구조물에 적용하기 위한 반응소결법을 개발했고, 이 방법을 이용해서 실리콘 카바이드(silicon carbide, SiC) 재질의 광학 몸체를 제작하고 소결체의 화학특성, 표면특성, 결정구조를 확인했다. 광학 몸체의 기계적, 화학적 성질을 고려한 연마와 코팅 방법을 개발했으며 화학기상증착법을 적용해 SiC 경면 표면 위에 치밀한 SiC 박막을 170 ㎛ 이상 증착함으로써 광학 성능이 우수한 경면을 만들 수 있었다. 반사경 제작 후 반사경과 지지 구조를 조립하고 정렬해서 다양한 광학 시계에 대해 파면 오차를 측정했다. 아울러 우주 환경 및 발사환경에 대한 우주 인증에 맞추어 구성품 및 최종 조립체를 온도와 진동에 대한 환경시험을 실시하여 설계 목표 성능을 달성했음을 확인했다.

경호무도 구성원리의 미학적 탐색 (A Study of Aesthetical Value of Composition Principle on Security Guard Martial Arts)

  • 김평수;임대용;손진
    • 시큐리티연구
    • /
    • 제25호
    • /
    • pp.131-146
    • /
    • 2010
  • 본 연구의 목적은 그간 사회의 요구로 인하여 발전을 거듭하고 있는 경호 경비학의 전공과목으로서 무도의 역사와 함께하는 경호무도의 학문적 체계 정립이 부족함을 인식하고 경호무도의 철학적 가치 연구를 위하여 그 한 방법으로 경호무도 구성원리 내에서 발견될 수 있는 미학적 가치를 탐색해보고자 하였다. 본 연구의 목적을 달성하기 위해 경호무도관련 학위논문 및 무도와 미학 관련 문헌을 광범위하게 조사였으며 이를 바탕으로 미학의 개념과 무도에서의 미학을 살피고 이를 토대로 경호무도 수련자의 반복 수련을 통한 기술습득과 경호원의 실제현장에서의 기술구사능력이 미학적 구성요소에 대한 체험을 가능하게 하고 심미적 감흥을 획득할 수 있음을 확인하였다. 궁극적으로 경호무도는 상대성 반복성 정신수양 신체일치성 힘의 방향 충격의 강화 및 완화 힘의 극대화 중심자세와 타격점 호흡조절 및 정신집중 등 그 구성원리를 따라 완성되어가는 기술연마 과정 속의 심미적 요소들로 인하여 미학적 가치를 구현할 수 있다고 여겨진다.

  • PDF

Nd:YAG 레이저를 이용한 철제 표면 옻칠 제거 실험 연구 (Experimental Study for Removing Lacquer Layer on Iron Surface by Nd:YAG Laser System)

  • 박창수;조남철;황현성
    • 보존과학회지
    • /
    • 제32권3호
    • /
    • pp.377-384
    • /
    • 2016
  • 철불의 개금 시 표면에 남아 있는 옻칠 제거 방법에는 물리적인 방법과 화학적인 방법을 사용하고 있으나, 표면 손상 및 약품 사용으로 인한 환경오염, 보존과학자의 건강에도 매우 유해하다. 그래서 본 연구에서는 비접촉식이고 친환경적인 Nd:YAG 레이저를 이용하여 옻칠 제거 실험을 실시하였다. 시편은 크기가 $5{\times}5cm$인 철제(Fe 99.9%)시편 표면을 균일하게 연마한 후 생칠을 도포 횟수를 달리하여 각각 $10{\mu}m$, $20{\mu}m$, $30{\mu}m$의 두께 차이로 제작하였다. 본 실험에서 사용된 레이저기기는 Nd:YAG 레이저로, 적외선 영역의 1064 nm(160~800 mJ)와 가시광선 영역인 532nm(50~350 mJ)의 두 가지 파장 모드를 이용하였다. 실험은 레이저 파장 에너지 조사 횟수 등에 따른 시편 표면의 변화를 조사하였다. 레이저 조사 전 후 표면을 실체현미경과 SEM 관찰, 비접촉 표면 조도 측정기, FT-IR 등을 이용하여 옻칠의 제거 및 잔류 여부를 알아보았다. 분석 결과 1064 nm 파장을 이용하여 $1.0J/cm^2$ 밀도에서 표면 손상 없이 $10{\mu}m$, $20{\mu}m$ 두께의 옻칠이 제거됨을 확인할 수 있었다. 이와 같은 결과를 통해 철불 개금 시 잔류하고 있는 옻칠 제거 방법으로 Nd:YAG 레이저가 효율적임을 본 실험을 통해 알 수 있었다. 향후 금속뿐만 아니라 목칠 가구 등 다양한 재질의 연구가 이루어지면 표면 손상 없이 옻칠을 제거 하는데 효과적으로 활용 가능할 것으로 본다.

습식표면처리 및 열 사이클에 따른 Cu/SiNx 계면접착에너지 평가 및 분석 (Effects of Wet Chemical Treatment and Thermal Cycle Conditions on the Interfacial Adhesion Energy of Cu/SiNx thin Film Interfaces)

  • 정민수;김정규;강희오;황욱중;박영배
    • 마이크로전자및패키징학회지
    • /
    • 제21권1호
    • /
    • pp.45-50
    • /
    • 2014
  • 반도체 미세구리배선 적용을 위하여 구리배선의 습식 표면처리 및 열 사이클에 따른 구리 박막과 실리콘질화막 도포층 사이의 계면접착에너지를 4점굽힘시험을 통해 정량적으로 평가하였다. 구리배선을 화학적 기계적 연마한 후 습식 표면처리를 통하여 구리 박막과 실리콘질화막의 계면접착에너지는 $10.57J/m^2$에서 $14.87J/m^2$로 증가하였다. $-45{\sim}175^{\circ}C$범위에서 250사이클 후, 표면처리를 하지 않은 시편의 계면접착에너지는 $5.64J/m^2$으로, 표면처리를 한 시편은 $7.34J/m^2$으로 감소하였으며, 모든 시편의 박리계면은 구리 박막과 실리콘질화막 계면으로 확인되었다. X-선 광전자 분광법으로 계면 결합 상태를 분석한 결과, 화학적 기계적 연마 공정 후 구리배선의 표면 산화물이 습식표면처리에 의해 효과적으로 제거된 것을 확인하였다. 또한, 열 사이클 처리동안, 구리 박막과 실리콘질화막의 큰 열 팽창 계수 차이로 인한 열응력으로 인하여 구리 박막과 실리콘질화막 계면이 취약해지고, 계면을 통한 산소유입에 따른 구리 산화층이 증가하여 계면접착에너지가 저하된 것으로 판단된다.