• 공업화학
• /
• 제32권1호
• /
• pp.68-74
• /
• 2021

고분자전해질 연료전지 성능에서 기체확산층 압축률은 계면 접촉 저항과 전극으로의 반응물 전달 및 전극 내 수분 포화도에 영향을 주는 중요한 변수이다. 본 연구에서는 국내 상용 제품인 JNT20-A3를 이용하여 기체확산층 압축률에 대한 연료전지의 성능 평가를 수행하였다. 전극면적 25 ㎠ 단위 전지를 이용하여 상대습도 조건과 압축률에 대한 전기화학 임피던스 분광법과 분극 곡선을 측정하였다. 기체확산층을 18.6%에서 38.1%으로 압축시켰을 때 상대습도 100, 25% 조건에서 ohmic 저항이 각각 8, 30 mΩ·㎠이 감소하여 기체확산층 압축률이 증가할수록 접촉 저항이 감소하는 것과 동시에 막의 수화도가 증가하는 것을 확인하였다. 상대습도 조건에 대한 ohmic 저항의 변화 경향을 통하여, 압축률을 증가시켰을 때 기체확산층의 기공이 감소하여 공기극에서의 물 역확산과 전해질 막의 수화도가 증가하는 것을 확인하였다.

• Corrosion Science and Technology
• /
• 제17권6호
• /
• pp.287-291
• /
• 2018

In this study, corrosion behavior of a SA178-A alloy used in the boiler tube of a district heating system was investigated in different environments where it was exposed to pure water, district heating (DH) water, and filtered district heating (FDH) water. After the corrosion test, the surface morphology was examined for observation of the number of pitting sites and pitting area fraction, using a scanning electron microscope. The DH water and FDH water conditions resulted in a lower corrosion potential and pitting potential, and revealed a significantly higher corrosion rate than the pure water condition. The pitting sites in the DH water (pH 9.6) were approximately eighteen times larger than those in the pure water (pH 9.6). Compared to the DH water, the corrosion potential became more noble in the FDH water condition, where iron ions were reduced through filtration. However, the corrosion rate increased in the FDH water due to an increased concentration of chloride ions, which deteriorated the stability of passive film.

• Membrane and Water Treatment
• /
• 제10권6호
• /
• pp.417-429
• /
• 2019

Poly Sulfone nanofibers were electrospun to fabricate membranes of different characteristics. To fabricate the fiber mats, polymer concentration, flowrate, and current density were determined as the most influencing factors affecting the overall performance of the membranes and studied through Response Surface Methodology. The Box-Behnken Design method (three factors at three levels) was used to design, analyze, and optimize the parameters to achieve the best possible performance of the electrospun membranes in forward osmosis process. Also, internal concentration polarization that characterizes the efficiency of the forward osmosis membranes was determined to better assess the overall performance of the fabricated electrospun membranes. Water flux to reverse salt flux was considered as the main response to assess the performance of the membranes. As confirmed experimentally, best membrane performance with the minimal structural parameter value could be achieved when predicted optimal values were used to fabricate the membranes through electrospinning process.

• Journal of Ginseng Research
• /
• 제14권3호
• /
• pp.385-390
• /
• 1990

To investigate the effect of ginseng extracts on the changes of flllidity and lysis of liposome reverse phase evaporation vesicle (REV) was employed as model membrane and methylene blue was used as photosensitizer. Fluoresence polarization (P vaule) that represented fluidity of liposome was increased by photooxidation. All of the ginseng saponin inhibited the increasing rate of P value; the order of effect was ginseng water extract>biol saponin>triol saponin>crude saponin. In trapped G-6-P% measurement for lysis of liposome, ginseng water extract and crude saponin promoted the lysis of liposome. Therefore, we thought that ginseng extracts acted as both antioxidant and detergent.

• Corrosion Science and Technology
• /
• 제22권5호
• /
• pp.305-313
• /
• 2023

The objective of this study was to investigate the effectiveness of sodium dodecyl benzene sulfonate (SDBS) as a corrosion inhibitor on the pitting corrosion behavior of aluminum alloys used in electric vehicle battery cooling systems within a mixture of ethylene glycol and water (EG-W) coolant. Potentiodynamic polarization testing revealed unstable passive film formation on the aluminum alloys in the absence of SDBS. However, the addition of SDBS resulted in a robust passive film, enhancing the pitting corrosion resistance across all examined alloys. Pitting corrosion was predominantly observed near intermetallic compounds in the presence of Cl? ions, which was attributed to galvanic interactions. Among tested alloys, A1040 demonstrated superior resistance due to its lower areal fraction of precipitates and donor density. The incorporation of SDBS inhibitors mitigated the overall pitting corrosion process by hindering Cl? ion penetration. These findings suggest that SDBS can significantly improve pitting corrosion resistance in aluminum alloys employed in battery coolant environments.

• Bulletin of the Korean Chemical Society
• /
• 제12권5호
• /
• pp.495-499
• /
• 1991

The changes in the free energy and hydration free energy of N-acetyl-N'-methylalaninamide in the unhydrated and hydrated states were calculated with ECEPP/2 and the hydration shell model. The configurational entropy change of each conformation in both states were computed by a harmonic method. To understand the hydration structure of each hydrated conformation, the hydration-shell coordination numbers of functional. groups of the molecule were estimated from water-accessible volumes, and the contributions of water-accessible volume and polarization of each group to the hydration free energy were analyzed. The results show a reasonable agreement with those of recent theoretical studies and experiments.

• 상하수도학회지
• /
• 제18권1호
• /
• pp.73-80
• /
• 2004

This study investigated the phenomena of membrane fouling by NOM and the effect of the fouling on removal of micro-pollutants. NOM has a great effect on decline of permeate flux. Permeate flow rate was reduced by 88% in RO and 34.8% in NF for 323hr operation period. Removal rate of $UV_{254}$, is 87.4% in RO and 78.5% in NF and removal rate of DOC is 42.7% in RO and 32.9% in NF for 2mg/l humic acid. Removal efficiency of the micro-pollutants by the RO and NF membranes fouled by humic acid was mostly lower than that by the new membrane. The concentration polarization which affects the flux and the rejection was thought to occur in the active layer of the membrane, as the membrane was getting fouled.

• 대한원격탐사학회지
• /
• 제34권1호
• /
• pp.117-126
• /
• 2018

This study aims to evaluate the usability of polarimetric SAR measurements for discriminating water-covered area from other land cover types and to propose polarimetric parameters showing the better response to the flood. Flood-related changes in the polarimetric parameters were studied using the L-band PALSAR-2 quad-pol mode data acquired before and after the severe flood events occurred in Joso city, Japan. The experimental results showed that, among various polarimetric parameters, the HH-polarization intensity, the Shannon entropy, and the surfaces scattering component of model-based decomposition were found to be useful to discriminate water-covered areas from other land cover types. Particularly, an unsupervised change detection with the Shannon entropy provides the best result for an automated mapping of flood extents.

• Corrosion Science and Technology
• /
• 제9권3호
• /
• pp.137-141
• /
• 2010

Sodium nitrite is widely used as one of the popular corrosion inhibitors for the protection of ferrous metal in closed cooling water system, such as a diesel engine and a chiller. The optimum treatment conditions are studied through laboratory tests using linear polarization resistance (LPR) technique. Corrosion rate of the carbon steel electrode could be maintained less than $2.5{\times}10^{-3}$ mmpy in the test condition of 500 ppm as ${NO_2}^-$, 200 ppm as $Cl^-$, $70^{\circ}C$ and pH 6.8. The pH control is confirmed not to be an important factor in the protection of carbon steel by sodium nitrite inhibitor. The addition of tolyltriazole was needed for the protection of the copper alloy in the sodium nitrite treatment system.

• Bulletin of the Korean Chemical Society
• /
• 제20권3호
• /
• pp.345-351
• /
• 1999

The structures, the energetics, and the spectra of K+(H2O)3 have been studied at HF and MP2 levels with the basis set of triple-zeta plus two sets of polarization functions (TZ2P) for water molecules. Two structures considered are 3+0 (D3), and 2+1 (C2v). The 2+1 (C2v) has two hydrogen bonds between the primary hydration and the secondary hydration shell water molecules. They have similar binding energy and enthalpy. The most stable conformation of K+(H2O)3 is entropy driven as shown in Na+(H2O)5 and in Na+(H2O)6 cases. The 3+0 (D3) conformation is the most stable at 298 K and at 1 atm, based on Gibbs free energy changes (ΔGr). The thermal contributions to the enthalpy and the Gibbs free energy are corrected for the low frequency modes. The corrected ΔGr is in good agreement with the experimental value. Vibrational frequencies of two conformations are revealed as their characteristics.