• Membrane and Water Treatment
• /
• 제2권3호
• /
• pp.159-173
• /
• 2011

The air gap membrane distillation (AGMD) process was applied for water desalination. The main objective of the present work was to study the heat and mass transfer mechanism of the process. The experiments were performed on a flat sheet module using aqueous NaCl solutions as a feed. The membrane employed was hydrophobic PTFE of pore size 0.22 ${\mu}m$. A mathematical model is proposed to evaluate the membrane mass transfer coefficient, thermal boundary layers' heat transfer coefficients, membrane / liquid interface temperatures and the temperature polarization coefficients. The mass transfer model was validated by the experimentally and fitted well with the combined Knudsen and molecular diffusion mechanism. The mass transfer coefficient increased with an increase in feed bulk temperature. The experimental parameters such as, feed temperature, 313 to 333 K, feed velocity, 0.8 to 1.8 m/s (turbulent flow region) were analyzed. The permeation fluxes increased with feed temperature and velocity. The effect of feed bulk temperature on the boundary layers' heat transfer coefficients was shown and fairly discussed. The temperature polarization coefficient increased with feed velocity and decreased with temperature. The values obtained were 0.56 to 0.82, indicating the effective heat transfer of the system. The fouling was observed during the 90 h experimental run in the application of natural ground water and seawater. The time dependent fouling resistance can be added in the total transport resistance.

• 한국시스템다이내믹스연구
• /
• 제15권2호
• /
• pp.51-74
• /
• 2014

Over the past few years Korea has achieved rapid economic growth, while the deepening polarization of income has negatively affected Korea economy and society. It can be the reason of this negative effect on economy that the increased income by the economic growth has not been distributed socially, but overly focused on one part of social class. One of the important and powerful solution of social polarization could be the strengthening of the income distribution. In these circumstances, the social interest and discussion on the universal welfare system and on the basic income as the means of income redistribution have been increasing. In this study, a system dynamic analysis was conducted to find how an universal cash payment as basic income providing cash benefits impacts on the promotion of consumption in private sector, of local jobs and of local economic organizations. Recently, the poor energy consumption ability of energy poverty became one of the social problems. Also it was analysed how an energy payment-in-kind as basic income influences on the energy consumption of the region, the energy production capacity, the promotion of local energy. The universal cash payment and energy payment-in-kind as the basic income policy showed similar and positive effects on the local economy system and on the local energy system respectively.

• 한국세라믹학회지
• /
• 제43권3호
• /
• pp.162-168
• /
• 2006

The perovskites with nominal compositions $La_{0.8}Sr_{0.2}Fe_{1-x}M_xO_3$ (M=Co, Mn, Ni, x=0.1-0.3) were fabricated by a solid-state reaction method as cathode materials of low-temperature operating Solid Oxide Fuel Cells (SOFCs). X-ray diffraction analysis and microstructure observation for the sintered samples were performed. The ac complex impedance were measured in the temperature range $600-900^{\circ}C$ in air and fitted with a Solatron ZView program. The electrical conductivity and polarization resistance of $La_{0.8}Sr_{0.2}Fe_{1-x}M_xO_3$ (M=Co, Mn, Ni, x=0.1-0.3) were characterized systematically. The porosities of the sintered samples were in the range of 25% to 38%. The polarization resistance of $La_{0.8}Sr_{0.2}Fe_{0.7}M_{0.3}O_3$ was $0.291{\Omega}cm^2\;at\;700^{\circ}C$.

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.872-878
• /
• 2003

본 논문에서는 3D-Ray Tracing 기법을 이용한 옥내 무선통신용 편파발생 시뮬레이터를 개발하고, 실내 무선전파환경에서 실제 측정한 데이터와의 비교를 통하여 검증하였다. 개발된 시뮬레이터를 이용하여 Line-Of-Sight(LOS)와 Non-Line-Of-Sight(NLOS) 무선전파 환경에서 수직, 수평, 원편파에 대한 채널특성과 편파 다이버시티 수신특성을 해석하였다. 그 결과 원편파의 경우 기수회 반사파를 억제 수신하는 특성 때문에 수직 및 수평편파의 경우와 비교하여 다중경로 페이딩이 현저하게 경감됨을 알 수 있었다.

• 한국광학회지
• /
• 제14권1호
• /
• pp.72-79
• /
• 2003

본 논문에서는 고차 편광모드분산(PMD: polarization-mode dispersion)을 효과적으로 보상하기 위한 방법으로, DOP (degree of polarization)를 1차 PMD 보상을 위한 피드백 신호와 고차 PMD 보상을 위한 feed forward 신호로 사용하는 알고리즘을 제안하였다. 1차 보상이 끝난 후의 DOP값이 남아있는 고차 PMD의 정도를 나타내는 척도로써 인식하여 고차 PMD를 보상하는 시스템이 되겠다. 이러한 시스템은 고차 보상기의 자유도를 1차 보상기의 자유도로 제한하기 때문에 안정적이고 비교적 간단하게 구성할 수 있다는 장점이 있다. 제안된 알고리즘의 성능을 분석하기 위하여 10Gbps NRZ시스템의 전송 모의 실험을 수행하였으며, 그 결과 시스템 다운 시간인 outage probability가 약 세 배 가량 감소되는 것을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.515-520
• /
• 2005

CMP(chemical mechanical polishing) process has been attracted as an essential technology of multi-level interconnection. Also CMP process got into key process for global planarization in the chip manufacturing process. In this study, potentiodynamic polarization was carried out to investigate the influences of $H_2O_2$ concentration and metal oxide formation through the passivation on tungsten and titanium. Fortunately, the electrochemical behaviors of tungsten and titanium are similar, an one may expect. As an experimental result, electrochemical corrosion of the $5\;vol\%\;H_2O_2$ concentration of tungsten and titanium films was higher than the other concentrations. According to the analysis, the oxidation state and microstructure of surface layer were strongly influenced by different oxidizer concentration. Moreover, the oxidation kinetics and resulting chemical state of oxide layer played critical roles in determining the overall CMP performance. Therefore, we conclude that the CMP characteristics tungsten and titanium metal layer including surface roughness were strongly dependent on the amounts of hydrogen peroxide oxidizer.

• 한국표면공학회지
• /
• 제41권4호
• /
• pp.156-162
• /
• 2008

Small FRP(fiber-reinforced polymer) fishing ships have numerous problems with the point of the environmental and recycling perspectives. In light of these aspects, aluminum can be used as a material for ship building. It is environmental friendly, easy to recycle, and provides a high added value to fishing boats. In this paper, we report on mechanical and electrochemical characteristics of welding parts for friction stir welded 5456-H116 Al alloy. In friction stir welded at various traveling speeds under the rotation speed of 500 RPM, the best characteristics presented in traveling speed of 15mm/min. The anodic polarizations of base metal and welding metal were observed tendency which current density from the open circuit potential suddenly increase. The cathodic polarization presented concentrated polarization caused by the dissolved oxygen reduction reaction and activation polarization caused by hydrogen generation. From result of Tafel analysis, the corrosion potential of 5456 alloy(Base metal) was lower than that of friction stir welded part, as were its corrosion current densities.

• 한국항공우주학회지
• /
• 제39권3호
• /
• pp.254-260
• /
• 2011

원격측정링크는 항공기의 움직임에 따라 안테나 이득과 편파가 실시간으로 변화하는 동적 통신링크이다. 본 논문에서는 항공기의 비행궤적, 자세, 3차원 안테나 패턴을 사용하여 실시간 탑재안테나 이득과 송수신 안테나의 편파 부정합을 계산하였다. 그리고 다중경로 환경을 2-Ray 둥근지구 반사지형으로 모델링하고, 항공기에서 송신한 RF 신호를 빔폭이 좁은 안테나로 수신할 때 수신신호세기를 예측하였다. 또한 비행시험을 실시하고 측정값과 예측값을 비교하여 잘 일치함을 확인하였다.

• 한국통신학회논문지
• /
• 제40권7호
• /
• pp.1363-1368
• /
• 2015

본 논문에서는 개구결합 원형편파 마이크로스트립 배열안테나를 제안하였다. 제안한 안테나는 2.4GHz ISM 대역용이고 개구모양은 변형된 H형 슬롯을 사용하였다. 전자파 해석 툴인 HFSS를 반복적으로 사용하여 최적의 안테나 설계 파라미터 값을 찾았다. 배열안테나의 반사손실, 축비, 방사패턴 및 이득을 단일안테나와 비교하였다. 제안한 배열안테나가 2.4GHz ISM 대역 등 여러 분야에서 충분히 사용될 수 있음을 확인하였다.

• Journal of Electrochemical Science and Technology
• /
• 제7권4호
• /
• pp.269-276
• /
• 2016

Carbon-supported ordered Pt-Ti alloy nanoparticles were prepared as a durable and efficient oxygen reduction reaction (ORR) electrocatalyst for polymer electrolyte membrane fuel cells (PEMFCs) via wet chemical reduction of Pt and Ti precursors with heat treatment at $800^{\circ}C$. X-ray diffraction analysis confirmed that the prepared electrocatalysts with Ti precursor molar compositions of 40% (PtTi40) and 25% (PtTi25) had ordered $Pt_3Ti$ and $Pt_8Ti$ structures, respectively. Comparison of the ORR polarization before and after 1500 electrochemical cycles between 0.6 and 1.1 V showed little change in the ORR polarization curve of the electrocatalysts, demonstrating the high stability of the PtTi40 and PtTi25 alloys. Under the same conditions, commercial carbon-supported Pt nanoparticle electrocatalysts exhibited a negative potential shift (10 mV) in the ORR polarization curve after electrochemical cycling, indicating degradation of the ORR activity.