• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.316-322
• /
• 2002

The Orthogonal Frequency Division Multiplexing(OFDM) is a special case of multicarrier transmission, where a single data stream is divided into many subcarriers and transferred in a parallel way. It reduces the necessary bandwidth using the orthogonality between the subcarriers. Therefore it requires the transmission channel which has stable characteristic. When the delay spread of the channel exceed the guard interval, then the orthogonality of the subcarriers cannot maintain and as a result the system performance degrade. In this paper, the XCP-OFDM(OFDM using cross-handed Circular Polarization) system is newly proposed. This system divides the channel in order to eliminate the overlapping of subcarrier's spectrum by using cross-handed circular polarization. Therefore, the proposed XCP-OFDM system can improve the performance without increasing the guard interval. Both theoretical analysis and simulation results are described.

• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.486-491
• /
• 1997

A division-of-amplitude type photopolarimeter has been constructed for the analysis of the dynamic optical characteristics of liquid crystal panels, one of the essential components of liquid crystal displays. In this instrument an incoming light ray, whose state of polarization is to be determined, is divided into three rays of nearly same intensities and of identical polarization state by using NPBS'(non-polarizing beam splitters). Each of the three rays is further divided into two components of orthogonal polarization states by using a PBS(polarizing cube beamsplitter) or by using a combination of a quater wave plate followed by a PBS. The intensity of each ray is measured by using a photodiode to produce a set of six photo-signals, which in turn are converted into four Stokes parameters describing the state of polarization of the incoming ray. Performance test of the insrument shows that its time resolution is 80 $mutextrm{s}$, accuracy $\pm$0.3 degrees when the state of polarization of the incoming ray is representated on the Poincare sphere.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.223-229
• /
• 1997

A source code is developed on the basis of Berreman's 4$\times$4 matrix formalism for the analysis of polarization transmission characteristics of twisted nematic liquid crystal display. By using the program, the polarization transmission characteristics of liquid crystal cells and polarizers are analyzed. For a normally white twisted nematic liquid crystal cell, we obtained a family of iso-contrast contours which helps to understand the viewing angle characteristics of the liquid crystal display device by using the cell. The program also help us to understand the variation of the degree of polarization as well as the deviation of the state of polarization of the light transmitted through the polarizer commonly used in the LCD according to the change in incidence angle. This result suggests the contrast of the images appearing on the LCD can be limited by the characteristics of the polarizer in addition to the liquid crystal cell.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.73-77
• /
• 2023

In this study, we developed a Multi-level FeRAM (Ferroelectrics random access memory) device utilizing different ferroelectric materials and analyzed its operation through C-V analysis using simulations. To achieve Multi-level operation, we proposed an MFM (Multi-Ferroelectric Material) structure by depositing two different ferroelectric materials with distinct properties horizontally on the same bottom electrode and subsequently adding a gate electrode on top. By analyzing C-V peaks based on the polarization phenomenon occurring under different voltage conditions for the two materials, we confirmed the feasibility of achieving Multi-level operation, where either one or both of the materials can be polarized. Furthermore, we validated the process for implementing the proposed structure using semiconductor fabrication through process simulations. These results signify the significance of the new structure as it allows storing multiple states in a single memory cell, thereby greatly enhancing memory integration.

• Journal of the Korean Institute of Gas
• /
• v.28 no.1
• /
• pp.65-72
• /
• 2024

Green Hydrogen demonstration complex is under conduction in Jeju island which is rich in renewable energy resources and will produces green hydrogen using a water electrolysis systems. In order to check durability of long-term operation, AST(accelerated stress test) was applied and the power pattern based on Jeju Island's wind power was applied. After 800 hours of repeated application of low current and high current, the performance of the PEM water electrolysis cell was reduced by up to 10% and by about 5.5% in operating conditions. As the result of impedance analysis, it can be seen that the electrode polarization resistance greatly increased than ohmic polarization resistance. In addition, when the durability evaluation was conducted by applying the wind power pattern of Jeju Island, the performance of the PEM water electrolysis cell showed up to 1.6% and a decrease of less than 1% in operating conditions. As a result of the impedance, it can be seen that the change of ohmic resistance and electrode polarization resistance is small.

• Corrosion Science and Technology
• /
• v.18 no.6
• /
• pp.292-299
• /
• 2019

The hull material of a high-speed ship may cause erosion damage from fluid impact. When physical erosion and electrochemical corrosion combine, erosion corrosion damage occurs. The aluminum ship is vulnerable to erosion corrosion because it can be operated at high speed. Thus, in this study, Al5052-O and Al6061-T6 aluminum alloys for the marine environment were selected as experimental materials. The erosion corrosion resistance of Al5052-O and Al6061-T6 aluminum alloys in seawater was investigated by an erosion test and potentiodynamic polarization test at the various flow rate (0 m/s, 5 m/s, 10 m/s, 15 m/s, 20 m/s). Erosion corrosion characteristics were evaluated by surface analysis, 3D analysis, SEM analysis, and the Tafel extrapolation method. The results of surface damage analysis after the erosion test showed that Al6061-T6 presented better erosion resistance than Al5052-O. The results of the potentiodynamic polarization test at the various flow rate, corrosion current density by Tafel extrapolation presented lower values of Al6061-T6 than Al5052-O. Al5052-O showed more surface damage than Al6061-T6 at all flow rates. Consequently, Al6061-T6 presented better erosion corrosion resistance than Al5052-O. The results of this study are valuable data for selecting hull material for an aluminum alloy vessel.

• Atmosphere
• /
• v.29 no.2
• /
• pp.197-211
• /
• 2019

The observational sensitivity of dual-polarization weather radar was quantitatively analyzed by using two different pulse widths. For this purpose, test radar scan strategy which consisted of consecutive radar scan using long (LP: $2{\mu}s$) and short (SP: $1{\mu}s$) pulses at the same elevation angle was employed. The test scan strategy was conducted at three operational S-band dual-polarization radars (KSN, JNI, and GSN) of Korea Meteorological Administration (KMA). First, the minimum detectable reflectivity (MDR) was analyzed as a function of range using large data set of reflectivity ($Z_H$) obtained from JNI and GSN radars. The MDR of LP was as much as 7~22 dB smaller than that of SP. The LP could measure $Z_H$ greater than 0 dBZ within the maximum observational range of 240 km. Secondly, polarimetric observations and the spatial extent of radar echo between two pulses were compared. The cross-polar correlation coefficient (${\rho}_{hv}$) from LP was greater than that from SP at weak reflectivity (0~20 dBZ). The ratio of $Z_H$ (> 0 dBZ) and ${\rho}_{hv}$(> 0.95) bin to total bin calculated from LP were greater than those from SP (maximum 7.1% and 13.2%). Thirdly, the frequency of $Z_H$ (FOR) during three precipitation events was analyzed. The FOR of LP was greater than that of SP, and the difference in FOR between them increased with increasing range. We conclude that the use of LP can enhance the sensitivity of polarimetric observations and is more suitable for detecting weak echoes.

• Nuclear Engineering and Technology
• /
• v.38 no.5
• /
• pp.433-436
• /
• 2006

The implementation of multiplexing techniques combined with advances in neutron optics make the neutron three-axis spectrometers (TAS) an efficient tool to map inelastic response from single crystals over momentum transfer ranges comparable to the size of a single Brillouin zone. Thanks to recent progress in polarization techniques such experiments can be combined relatively easily with neutron polarization analysis, which does not only provide unambiguous separation of response corresponding to structural and magnetic degrees of freedom, but permits a quantitative analysis of the magnetic response anisotropy, often of crucial importance to test theoretical predictions. In the forthcoming decade we therefore expect a further development of the complementary use, rather than competition, of the reactor-based TAS's with time-of-flight (TOF) instruments for single crystal spectroscopy at the existing (ISIS) as well as at the newly built (SNS, J-PARK) pulsed sources.

• Journal of The Korean Astronomical Society
• /
• v.26 no.2
• /
• pp.103-114
• /
• 1993

We have analyzed a set of high resolution photographic line profiles of a Zeeman sensitive Fe I $\lambda$ 6302.5 line taken with the Universal Birefringent Filter over a single round sunspot (SPO 5007) at the Sacramento Peak Solar Observatory. The observed spectra recorded on films are traced by PDS and the traced densities are converted to relative intensity by means of IRAF. The Stokes I and V profiles are then constructed by adding together and subtracting from each other the left and right handed circular polarizations, respectively. The reduced I and V profiles are analyzed by means of the coarse analysis(Auer et al.(1977), Skumanich and Lites(1987)) with the use of inversion technique. It is found that the umbral field strength is about 3000 gauss and the field distribution follows closely the emperical model proposed by Wittmann(1974).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.101-104
• /
• 2002

The beam splitter is important in optical communication systems. in this work, thc quasi-state based on four-mode interference in thc MMI coupler is proposed, and so, device length is shorten to be 1/5 of general designed length. We designed thc polarization splitter based on thc concept of quasi-state. Thc analysis has been accomplished by thc effective index method(EIM) and thc mode propagation analysis(MPA) for given structure.