• 해양환경안전학회지
• /
• 제23권1호
• /
• pp.40-46
• /
• 2017

본 연구는 LS-DYNA 971 을 이용하여 내빙 구조 선박과 빙산 모형 간의 충돌 시험을 수행 후 북극해 운항 선박의 내빙 능력을 분석하였다. 국제선급연합회(IACS)의 Unified Requirements for Polar ship(URI) 규정을 바탕으로 FEM 선박 모형에 내빙 구조를 적용하였으며, 빙산 모형에는 Elastic-perfect plastic 물성과 Tsai-Wu 항복 곡면을 적용하였다. 또한 실험 결과 비교를 위하여 내빙 구조를 갖추지 않은 일반선박 모형과의 충돌 시험도 수행하였다. 실험 결과 일반 구조 선박의 구형 선수에 빙산 모형에 의해 움푹 들어간 약 1.8 미터 깊이의 선체 손상이 발생하였으나, 내빙 구조 선박의 충돌에서는 약 1.0 미터 깊이의 선체 손상만이 발생하였다. 또한 일반 구조 선박과 충돌한 빙산모형은 원형의 상태를 거의 유지한 반면, 내빙 구조 선박과 충돌한 빙산 모형은 내빙 구조의 구형 선수에 의해 빙산이 일부 파괴되는 현상이 발견되었다.

• 대한조선학회논문집
• /
• 제49권3호
• /
• pp.232-238
• /
• 2012

The effects of temperature on the structural behavior of polar class vessels have been experimentally and numerically investigated. Experiments were carried out on single frame structures made of steel material, DH36, which is used for outer shell of the vessels making transit through the polar region. A knife edge type striker was dropped down onto single frame structures. The temperatures of the single frames were set to $-30^{\circ}C$, $-50^{\circ}C$ and room temperature. The deflection around the mid-point of the single frame was measured and numerically simulated using finite element model. Strain rate effect on the structural behavior has been investigated and turned out that the strain rate effect can be neglected. From the results of the experiment and numerical analyses, it has been noticed that the permanent deflection at lower temperature was reduced due to a temperature hardening of material as expected.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권3호
• /
• pp.376-384
• /
• 2018

Selection of suitable ice class for ships operation is an important but not simple task. The increased exploitation of the Polar waters, both seasonal periods and geographical areas, as well as the introduction of new international design standards such as Polar Code, reduces the relevancy of using existing experience as basis for the selection, and new methods and knowledge have to be developed. This paper will analyse what can be the limiting ice thickness for ships navigating in the Russian Arctic and designed according to the Finnish-Swedish ice class rules. The permanent deformations of ice-strengthened shell structures for various ice classes is determined using MT Uikku as the typical size of a vessel navigating in ice. The ice load in various conditions is determined using the ARCDEV data from the winter 1998 as the basic database. By comparing the measured load in various ice conditions with the serviceability limit state of the structures, the limiting ice thickness for various ice classes is determined. The database for maximum loads includes 3-weeks ice load measurements during April 1998 on the Kara Sea mainly by icebreaker assistance. Gumbel 1 distribution is fitted on the measured 20 min maximum values and the data is divided into various classes using ship speed, ice thickness and ice concentration as the main parameters. Results encouragingly show that present designs are safer than assumed in the Polar Code suggesting that assisted operation in Arctic conditions is feasible in rougher conditions than indicated in the Polar Code.

• 대한조선학회논문집
• /
• 제45권5호
• /
• pp.513-522
• /
• 2008

In this paper, one of the widely-used ice resistance prediction methods, introduced by Spencer(1992) of the Institute for Ocean Technology, Canada, is reviewed. Spencer's component-based scaling system for ship-ice model tests is analysed to estimate the ice resistance of various types of icebreaking vessels (Canadian MV Arctic, Terry Fox, R-Class icebreaker, US icebreakers Polar Star and Healy, Russian SA-15 cargo ships, Japanese PM Teshio and a model ship). The general form and the non-dimensional coefficients in ice resistance prediction formula are obtained using the published ice model test and full-scale sea trial data. The applicability of Spencer's method on R-Class icebreaker is discussed to estimate ice resistance for the larger icebreaking cargo vessels. Additional parameters to account for the difference in hull forms of icebreakers and cargo vessels are recommended to be included in the Spencer's original ice resistance prediction formula.

• Ocean and Polar Research
• /
• 제42권2호
• /
• pp.171-178
• /
• 2020

R/V EARDO, commissioned in 1992, has successfully carried out ocean research campaigns in Korean jurisdictional and adjacent waters, including continental margins and coastal zones within the Korean Exclusive Economic Zone (EEZ), for 29 years. However, it will soon be reaching the end of its useful service life. A replacement for R/V EARDO is urgently needed to ensure the safety of vessel itself and its crews, and efficient ship operation and maintenance, as well as to meet modern scientific mission requirements (SMRs). Basic specifications for a replacement ship have been devised and reviewed over the past nine months. A test of the proposed hull form was also performed. The total tonnage of the proposed vessel is approximately 740 tons, and the overall length and width are 62.0 and 11.6 m, respectively. The new ship will thus be 73% larger than the current R/V EARDO; in particular, the research workspace will be 4.4 times larger. The major design priorities are the propulsion system, efficiency of radiated noise and vibration control, and the dynamic positioning system. An environmentally friendly emission system, meeting International Maritime Organization (IMO) Tier III regulations, will be installed in the third exhaust pipe. Various wet and dry lab spaces as well as 32 different scientific instruments have also been considered in the ship design.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권3호
• /
• pp.208-215
• /
• 2011

A full-scale field trial in ice-covered sea is one of the most important tasks in the design of icebreaking ships. The first Korean icebreaking research vessel 'ARAON', after her delivery in late 2009, had a sea ice field trial in the Arctic Sea during July-August, 2010. This paper describes the test procedures and data analysis on the icebreaking performance of the IBRV ARAON. The data gathered from the icebreaking performance test in the Chukchi Sea and the Beaufort Sea during the Arctic voyage of ARAON includes the speed and engine power of the ship as well as sea ice thickness and strength data. The air temperature, wind speed and heading of the ship were also measured during each sea ice trial. The ARAON was designed to break 1 m thick level ice with a flexural strength of 630kPa at a continuous speed of 3knots. She is registered as a KR POLAR 10 class ship. The principal dimensions of ARAON are 110 m, 19 m and 6.8 m in length, breadth and draft respectively. She is equipped with four 3,500kW diesel-electric main engines and two Azipod type propulsion motors. Four sea ice trials were carried out to understand the relationship between the engine power and the ship speed, given the Arctic ice condition. The analysis shows that the ARAON was able to operate at 1.5knots in a 2.5m thick medium ice floe condition with the engine power of 5MW, and the speed reached 3.1 knots at the same ice floe condition when the power increased to 6.6MW. She showed a good performance of speed in medium ice floe compared to the speed performance in level ice. More detailed analysis is summarized in this paper.

• Ocean and Polar Research
• /
• 제44권4호
• /
• pp.355-364
• /
• 2022

When the 60-ton-class patrol boat '72' of the Korea Coast Guard (KCG) was on duty and she accidentally collided with another patrol boat ('207', 200-ton-class) and sank. A month-long search found a small amount of lost items, but neither the crew nor the ship was found. For the first time in 39 years since the accident, the Korea Institute of Ocean Science and Technology (KIOST) searched the boat 72 using the latest integrated geophysical techniques. A number of sonar images presumed to be of a sunken ship was acquired using a combined system of side scan sonar and marine magnetometer, operated at an altitude of approximately 30 m from the seabed. At the same time, a strong magnetic anomaly (100 nT) was detected in one place, indicating the presence of an iron ship. A video survey using a remotely operated underwater vehicle (ROV) confirmed the presence of a shielding part of a personal firearm at the stern of the sunken vessel. Based on these comprehensive data, the sunken vessel discovered in this exploration was assumed to be '72'. This result is meaningful in terms of future ocean exploration and underwater archaeology, as the integrated system of various geophysical methods is an efficient means of identifying objects present in the water.

• 한국소음진동공학회논문집
• /
• 제25권5호
• /
• pp.321-328
• /
• 2015

최근 극지 선박의 수요가 늘어나고 있고 IACS(국제선급연합)에서는 대빙 선박에 대한 새로운 기준이 적용되고 있다. 이 선박에서는 추진시스템에 대한 대빙 설계 기준으로 빙 충격 토크는 프로펠러 날개 수를 중심으로 한 조화 함수로 규정되어 있다. 그러나 실 상황에서는 이러한 주기적인 기진 토크보다는 불규칙한 빙의 충격 토크가 발생할 수 있는 확률이 오히려 크다. 이 논문에서는 비틀림진동이 비교적 큰 6개의 실린더를 갖는 디젤엔진을 주 기관으로 한 추진시스템의 안정성을 검토하고자 한다. 특히 불규칙한 빙 충격 토크와 디젤엔진에서 발생하는 진동토크를 동시에 고려하여 비틀림진동의 공진점을 통과할 과도 비틀림 진동 응답을 이론적으로 해석하였다. 여기서 빙 충격토크는 빙이 프로펠러에 부딪칠 때를 여러 유형별로 가상하여 선급에서 규정된 방법에 의해서 구하였다. 전체적인 시스템의 과도응답 해석은 직접적분방법의 하나인 뉴마크(Newmark) 법을 이용하였다.