• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 추계학술대회
• /
• pp.130-132
• /
• 2015

The IMO Polar Code was adopted by Res.MSC.385(94) and Res.MEPC.264(68) and will enter into force on 1 January 2017. The Polar Code will affect design and equipment of ships intending to operate in polar areas. In this study, the requirements in the Polar Code are analysed from the perspective of class.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.463-468
• /
• 2011

The prospect of Arctic trade transportation opening on a year-round basis creates a vast opportunity of exploring untapped resources and shortened navigational routes. However, the environment's remoteness and lack of technical experiences remains a big challenge for the maritime industry. With this, engine designers and makers are continually investigating, specifically optimizing propulsion shafting system design, to meet the environmental and technical challenges of the region. Further, classification societies recognize the need to upgrade the Unified Rules concerning elements to meet current Polar requirements. Hence in this paper, excitation torque calculation on Polar class vessels propulsion shafting system will be reviewed. The propeller - ice interaction load effect, which is a main consideration of excitation source of Polar Class propulsion shafting system, on shaft design calculation will be analyzed.

• 대한조선학회논문집
• /
• 제49권3호
• /
• pp.227-231
• /
• 2012

In this study, a plastic hardening constitutive equation for steels of polar class vessels at low temperature is proposed. The equation was derived using the experimental data obtained from tensile tests at room and low temperatures. Tensile tests at low temperature are both costly and time consuming because an expensive cold chamber is necessary and it takes too much time to cool down a specimen to set temperature. Using the proposed plastic hardening constitutive equation the plastic hardening characteristics of steels for polar class vessels at low temperature can be easily predicted from the tensile test results at room temperature.

• 대한조선학회논문집
• /
• 제49권3호
• /
• pp.232-238
• /
• 2012

The effects of temperature on the structural behavior of polar class vessels have been experimentally and numerically investigated. Experiments were carried out on single frame structures made of steel material, DH36, which is used for outer shell of the vessels making transit through the polar region. A knife edge type striker was dropped down onto single frame structures. The temperatures of the single frames were set to $-30^{\circ}C$, $-50^{\circ}C$ and room temperature. The deflection around the mid-point of the single frame was measured and numerically simulated using finite element model. Strain rate effect on the structural behavior has been investigated and turned out that the strain rate effect can be neglected. From the results of the experiment and numerical analyses, it has been noticed that the permanent deflection at lower temperature was reduced due to a temperature hardening of material as expected.

• 해양환경안전학회지
• /
• 제23권1호
• /
• pp.40-46
• /
• 2017

본 연구는 LS-DYNA 971 을 이용하여 내빙 구조 선박과 빙산 모형 간의 충돌 시험을 수행 후 북극해 운항 선박의 내빙 능력을 분석하였다. 국제선급연합회(IACS)의 Unified Requirements for Polar ship(URI) 규정을 바탕으로 FEM 선박 모형에 내빙 구조를 적용하였으며, 빙산 모형에는 Elastic-perfect plastic 물성과 Tsai-Wu 항복 곡면을 적용하였다. 또한 실험 결과 비교를 위하여 내빙 구조를 갖추지 않은 일반선박 모형과의 충돌 시험도 수행하였다. 실험 결과 일반 구조 선박의 구형 선수에 빙산 모형에 의해 움푹 들어간 약 1.8 미터 깊이의 선체 손상이 발생하였으나, 내빙 구조 선박의 충돌에서는 약 1.0 미터 깊이의 선체 손상만이 발생하였다. 또한 일반 구조 선박과 충돌한 빙산모형은 원형의 상태를 거의 유지한 반면, 내빙 구조 선박과 충돌한 빙산 모형은 내빙 구조의 구형 선수에 의해 빙산이 일부 파괴되는 현상이 발견되었다.

• 대한수학회보
• /
• 제47권1호
• /
• pp.211-219
• /
• 2010

Let P be a Jacobian polynomial such as deg P = $deg_y$ P. Suppose the Jacobian polynomial P satisfies the intersection condition satisfying $dim_C$ C[x, y]/$P_y$> = deg P - 1, we can prove that the Keller map which has P as one of coordinate polynomial always has its inverse.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제28권4호
• /
• pp.343-353
• /
• 2021

In this paper, we obtain some inequalities concerning the class of generalized derivative and generalized polar derivative which are analogous respectively to the ordinary derivative and polar derivative of polynomials.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권3호
• /
• pp.376-384
• /
• 2018

Selection of suitable ice class for ships operation is an important but not simple task. The increased exploitation of the Polar waters, both seasonal periods and geographical areas, as well as the introduction of new international design standards such as Polar Code, reduces the relevancy of using existing experience as basis for the selection, and new methods and knowledge have to be developed. This paper will analyse what can be the limiting ice thickness for ships navigating in the Russian Arctic and designed according to the Finnish-Swedish ice class rules. The permanent deformations of ice-strengthened shell structures for various ice classes is determined using MT Uikku as the typical size of a vessel navigating in ice. The ice load in various conditions is determined using the ARCDEV data from the winter 1998 as the basic database. By comparing the measured load in various ice conditions with the serviceability limit state of the structures, the limiting ice thickness for various ice classes is determined. The database for maximum loads includes 3-weeks ice load measurements during April 1998 on the Kara Sea mainly by icebreaker assistance. Gumbel 1 distribution is fitted on the measured 20 min maximum values and the data is divided into various classes using ship speed, ice thickness and ice concentration as the main parameters. Results encouragingly show that present designs are safer than assumed in the Polar Code suggesting that assisted operation in Arctic conditions is feasible in rougher conditions than indicated in the Polar Code.

• 대한조선학회논문집
• /
• 제49권4호
• /
• pp.281-286
• /
• 2012

Single frame structures with notches were fractured by applying drop impact loadings at room temperature and low temperature. Johnson-Cook shear failure model has been employed to simulate the fractured single frame structures. Through several numerical analyses, material constants for Johnson-Cook shear failure model have been found producing the cracks resulted from experiments. Fracture strain-stress triaxiality curves at both room temperature and low temperature are presented based on the extracted material constants. It is expected that the fracture strain-stress triaxiality curves can offer objective fracture criteria for the assessment of structural fractures of polar class vessel structures fabricated from DH36 steels. The fracture experiments of single frame structures revealed that the structure on low temperature condition fractures at much lower strain than that on room temperature condition despite the same stress states at both temperatures. In conclusion, the material properties on low temperature condition are essential to estimate the fracture characteristics of steel structures operated in the Northern Sea Route.

• 한국항공우주학회지
• /
• 제35권2호
• /
• pp.165-170
• /
• 2007

날개-동체-카나드 형상 전투기급 항공기 개념설계 기간 동안, 항공기 기동성 증대 방안으로서 카나드-앞전플랩 스케줄링 효과에 대한 연구를 수행하였다. 본 연구에서는 고속 영역에서 카나드-앞전플랩 변위각에 의한 양항특성을 예측하기 위하여 보정된 초음속 패널 방법을 사용하였다. 예측된 양항곡선을 활용하여 카나드-앞전플랩 스케줄링 법칙을 설정하였다. 이러한 카나드-앞전플랩 스케줄 법칙은 양항비를 최대로 하는 카나드-앞전플랩 굽힘과 비행조건과의 관계이다. 카나드-앞전플랩 스케줄링에 의한 결과를 기초로, 제시된 방법은 날개-동체-카나드형상 전투기급 항공기의 기동성을 증대하는데 유용한 것으로 확인되었다.