• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.5
• /
• pp.278-282
• /
• 2018

We propose a SPICE model of drain-induced barrier lowering (DIBL) for a junctionless cylindrical surrounding gate (JLCSG) MOSFETs. To this end, the potential distribution in the channel is obtained via the Poisson equation, and the threshold voltage model is presented for the JLCSG MOSFET. In a JLCSG nano-structured MOSFET, a channel radius affects the carrier transfer as well as the channel length and oxide thickness; therefore, DIBL should be expressed as a function of channel length, channel radius, and oxide thickness. Consequently, it can be seen that DIBLs are proportional to the power of -3 for the channel length, 2 for the channel radius, 1 for the thickness of the oxide film, and the constant of proportionality is 18.5 when the SPICE parameter, the static feedback coefficient ${\eta}$, is between 0.2 and 1.0. In particular, as the channel radius and the oxide film thickness increase, the value of ${\eta}$ remains nearly constant.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.241-251
• /
• 1991

The present simulation model relies on a new approach of the heavy particle motion in a turbulent flow considering the time and space correlation to the Lagrangian point of view. The turbulent field is, here, assumed that its characteristic scales are random and follow a Poisson's distribution. Using this model, we have computed the trajectory of each particle, that is, its velocity and position at each time in order to study the dispersion of particles in a grid turbulent flow. The computed results have been compared to the corresponding experimental data. Due to the complex mechanism of turbulence and the theoretically and experimentally lacking information, we had to make some assumptions for simplifying the situation, but we have found the good agreement between simulated and measured results. In particular, the application of the present method on the Lagrangian correlation of particle provides an interesting alternative to the usual computational methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.11
• /
• pp.47-55
• /
• 2004

In this paper, an enhanced time-based registration method is proposed. The method reduces the registration cost when a mobile terminal stays in a cell for a long time. We also analyze the performance of the proposed method numerically. In the analysis, we assume Poisson call arrival distribution and exponential cell resident time. From the analysis we calculate the optimal time-interval. Additionally, limit cost analysis is made to investigate the behaviors in the limit conditions. To compare the performance of the proposed method with the original time-based registration method, we analyze the performance of the original time-based registration method. In the comparisons, we see that the proposed enhanced time-based registration method has better performance and is applicable to the PCS systems.

• Journal of the Korean Data and Information Science Society
• /
• v.9 no.2
• /
• pp.311-322
• /
• 1998

In this paper the problem of modeling count data where the observation period is determined by the survival time of the individual under study is considered. We assume marginal frailty model in the counts. We assume that the death times follow a Weibull distribution with a rate that depends on some covariates. For the counts, given a frailty, a Poisson process is assumed with the intensity depending on time and the covariates. A gamma model is assumed for the frailty. Maximum likelihood estimators of the model parameters are obtained. The model is applied to data set of patients with breast cancer who received a bone marrow transplant. A model for the time to death and the number of supportive transfusions a patient received is constructed and consequences of the model are examined.

• Structural Engineering and Mechanics
• /
• v.56 no.1
• /
• pp.137-156
• /
• 2015

In this paper, an analytical solution of displacement, strain and stress field for rotating thick-walled cylinder made of functionally graded material subjected to the uniform external magnetic field and thermal field in plane strain state has been studied. Stress, strain and displacement field as a function of radial coordinates considering magneto-thermo-elasticity are derived analytically. According to the Maxwell electro-dynamic equations, Lorentz force in term of displacement is obtained in cylindrical coordinates. Also, symmetric temperature distribution along the thickness of hollow cylinder is obtained by solving Fourier heat transfer equation in cylindrical coordinates. Using equation of equilibrium and thermo-mechanical constitutive equations associated with Lorentz force, a second-order inhomogeneous differential equation in term of displacement is obtained and will be solved analytically. Except Poisson's ratio, other mechanical properties such as elasticity modulus, density, magnetic permeability coefficient, heat conduction coefficient and thermal expansion coefficient are assumed to vary through the thickness according to a power law. In results analysis, non-homogeneity parameter has been chosen arbitrary and inner and outer surface of cylinder are assumed to be rich metal and rich ceramic, respectively. The effect of rotation, thermal, magnetic field and non-homogeneity parameter of functionally graded material which indicates percentages of cylinder's constituents are studied on displacement, Von Mises equivalent stress and Von Mises equivalent strain fields.

• Structural Engineering and Mechanics
• /
• v.32 no.4
• /
• pp.563-581
• /
• 2009

In this paper, the peak horizontal ground acceleration over the bedrock (PGA) is calculated by a probabilistic seismic hazard assessment (PSHA). For this reason, at first, all the occurred earthquakes in a radius of 200 km of Sanandaj city have been gathered. After elimination of the aftershocks and foreshocks, the main earthquakes were taken into consideration to calculate the seismic parameters (SP) by Kijko (2000) method. The seismotectonic model of the considered region and the seismic sources of the region have been modeled. In this research, Sanandaj and its vicinity has been meshed as an 8 (vertical lines) * 10 (horizontal lines) and the PGA is calculated for each point of the mesh using the logic tree method and the five attenuation relationships (AR) with different weighted coefficient. These calculations have been performed by the Poisson distribution of four hazard levels. Then by using it, four regional maps of the seismic hazard regions have been provided for Sanandaj and its vicinity. The results show that the maximum and minimum value of PGA for the return periods of 75, 225, 475, 2475 years are (0.114, 0.074) (0.157, 0.101), (0.189, 0.121) and (0.266, 0.170), respectively.

• Structural Engineering and Mechanics
• /
• v.62 no.5
• /
• pp.587-593
• /
• 2017

The objective of this analytical study is to calculate the elasto-plastic stresses of Functionally Graded (FG) hyperbolic disc subjected to uniform temperature. The material properties (elastic modulus, thermal expansion coefficient and yield strength) and the geometry (thickness) of the disc are assumed to vary radially with a power law function, but Poisson's ratio does not vary. FG disc material is assumed to be non-work hardening. Radial and tangential stresses are obtained for various thickness profile, temperature and material properties. The results indicate that thickness profile and volume fractions of constituent materials play very important role on the thermal stresses of the FG hyperbolic discs. It is seen that thermal stresses in a disc with variable thickness are lower than those with constant thickness at the same temperature. As a result of this, variations in the thickness profile increase the operation temperature. Moreover, thickness variation in the discs provides a significant weight reduction. A disc with lower rigidity at the inner surface according to the outer surface should be selected to obtain almost homogenous stress distribution and to increase resistance to temperature. So, discs, which have more rigid region at the outer surface, are more useful in terms of resistance to temperature.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.11
• /
• pp.1395-1406
• /
• 2001

In order to cover a widespread service range, terrestrial/satellite-mixed network is being combined with terrestrial ATM network. This dissertation analyzes and investigates several previously existent CDV compensation methods in order to compensate CDV arising from interfacing satellite TDMA and ATM. Specifically to supplement the problems of timestamp and cell number counting methods, new Variable Timestamp method for CDV compensation is proposed. To evaluate the proposed method, MMPP(Markov Modulated Poisson Process), which can express VBR service very well, is selected as a cell input traffic model of terrestrial transmitting earth station. After several simulation, it is also confirmed that CDV compensation capability for VBR services is very superior to the cell number counting method. In this case, as the timestamp number Nts increases, CDV compensation capability increases, and the CDV distribution length is reduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1508-1517
• /
• 1993

In this paper, we propose the modeling of a wireless communication system using CSMA protocol, present analytical evalution and simulation as a function of arrival rate and mean END-to-END delay in the distributed packet radio network. Asynchronous 1-persistent CSMA protocol is used in wireless communication system with half duplex. We assume that all terminals are to be in the close range of each other, suitably located in the local area. The traffic presented to a common channel is assumed to be poisson distribution. Analytical model is based on a M/D/1 with breakdown. In conclusion for wireless network model proposed in this paper is suitable for packet arrival rate of 2 packet/sec with mean packet delay time less than 2 times the packet transmission time.

• Journal of Information Technology Applications and Management
• /
• v.23 no.4
• /
• pp.117-125
• /
• 2016

Software reliability in the software development process is an important issue. In infinite failure non-homogeneous Poisson process software reliability models, the failure occurrence rates per fault. can be presented constant, monotonic increasing or monotonic decreasing pattern. In this paper, the reliability software cost model considering decreasing intensity function was studied in the software product testing process. The decreasing intensity function that can be widely used in the field of reliability using power law process, log-linear processes and Musal-Okumoto process were studied and the parameter estimation method was used for maximum likelihood estimation. In this paper, from the software model analysis, we was compared by applying a software failure interval failure data considering the decreasing intensity function The decreasing intensity function model is also efficient in terms of reliability in the arena of the conservative model can be used as an alternating model can be established. From this paper, the software developers have to consider life distribution by preceding information of the software to classify failure modes which can be gifted to support.