• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.709-716
• /
• 2009

Thermal condition according to the operation attitude of a satellite in orbit would be essential to be known because the orbit attitude is a dominant factor to affect satellite thermal design. In this paper, the change in space thermal environment and the thermal effect in thermal design are studied for a low earth orbit satellite according to the yaw motion. The present satellite retains sun-pointing attitude during daylight due to the fixed type solar arrays. And it also moves along the orbit with constant yaw motion in a longitudinal axis so that a star tracker which is a star sensor for satellite's attitude control always looks into the deep space. This attitude is considered in its better visibility to the stars for a successful mission operation. Also, it is required to access the corresponding thermal effects due to the yaw motion. Therefore, we try to verify these by the thermal analysis for the satellite thermal model with the yaw motion.

• Journal of Korea Multimedia Society
• /
• v.11 no.3
• /
• pp.373-385
• /
• 2008

The evolution of input device for computer has pretty much slowed down after the introduction of mouse as feinting input device. Even though stylus and touch screen were invented later on which provide some alternatives, all these methods were designed to have close range interaction with computer. There are not many options available for user to interact with computer from afar, which is especially needed during presentation. Therefore, in this paper, we try to fill the gap by proposing a laser pointer interaction system to allow user to give pointing input command to the computer from some distance away using only laser pointer, which is cheap and readily available. With the combination of image processing based software, we could provide mouse-like pointing interaction with computer. The proposed system works well not only in currently plane screen, but also in flexible screen by incorporating the feature of non-linear coordinate mapping algorithm in our system so that our system can support non-linear environment, such as curved and flexible wall.

• KSCI Review
• /
• v.14 no.2
• /
• pp.165-174
• /
• 2006

This paper is a matter of remote control apparatus and display remote control system comprising the same. The remote controller is a wireless remote pointing device that is included a function of mouse and a function of remote controller for VOD etc. It is assembled a sending signal part to communicate with display device, a image sensor part to capture a seen of front view and a main body. Also, it includes a control part that analyzes the captured image, calculates a relative moving factor that main body is moved by user, and then controls the mouse cursor on the display device. The remote control apparatus is able to capture a seen of front view, to analyze the captured image, and to move a mouse cursor point on the display device as much as it calculated relative moving factor. Therefor it brings down the cost of production by a product design that is increased user satisfaction. And it, using the patent and the new product design, will make an epoch in development of the remote control system for Ubiquitous broadcasting industry.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.1
• /
• pp.128-135
• /
• 2009

Techniques for tracking the same region of physical space with the temporal sequences of images by matching the contours of constant phase show robust and stable performance in relative to the tracking techniques using or assuming the constant intensity. Using this property, we describe an algorithm for obtaining the robust motion parameters caused by the global camera motion. First, we obtain the optical flow based on the phase of spacially filtered sequential images on the region in a direction orthogonal to orientation of each component of gabor filter bank. And then, we apply the least squares method to the optical flow to determine the affine motion parameters. We demonstrate hat proposed method can be applied to the vision based pointing device which estimate its motion using the image including the display device which cause lighting condition varieties and noise.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.64.2-64.2
• /
• 2012

The SPICA (SPace Infrared Telescope for Cosmology & Astrophysics) project is a next-generation infrared space telescope optimized for mid- and far-infrared observation with a cryogenically cooled 3m-class telescope. It will achieve the high resolution as well as the unprecedented sensitivity from mid to far-infrared range. The FPC (Focal Plane Camera) is a Korean-led near-infrared instrument as an international collaboration. The FPC-S and FPC-G are responsible for the scientific observation in the near-infrared and the fine guiding, respectively. The FPC-G will significantly reduce the alignement and random pointing error through the observation of guiding stars in the focal plane. We analyzed the pointing requirement from the focal plane instruments. The feasibility study was performed to achieve the requirements. Here, we present the role of SPICA/FPC as a fine guiding camera.

• Archives of design research
• /
• v.17 no.4
• /
• pp.61-68
• /
• 2004

A great variety of handheld device are coming onto the market. Some have advanced features compacted into very small sized hardware. In order to maximize the capability of these devices, we need to understand the characteristics of different input methods and utilize them in a sufficient way. Our study aims to understand characteristics of each device, so that we can design user interfaces more effectively. Two experiments were conducted to compare target pointing performance with a pen and with a hardware key on small displays. In experiment 1, we examined participants' performance of target pointing with both input methods at different target sizes. It was found that pen operation is more erroneous than key based operation when target size is smaller than 5mm, but at a target size of 5mm, the error rate decreased to the same level as for key input. In experiment 2, we examined the effect of the number of targets. The results showed, with a target size of 5mm, the pen could point to targets quicker than with key input, when the distance to the target exeeds a path length of 3 steps.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.6
• /
• pp.551-557
• /
• 2013

In intelligent robot research, hand gesture recognition has been an important issue. And techniques that recognize simple gestures are commercialized in smart phone, smart TV for swiping screen or volume control. For gesture recognition, robust hand detection is important and necessary but it is challenging because hand shape is complex and hard to be detected in cluttered background, variant illumination. In this paper, we propose efficient hand detection algorithm for detecting pointing hand for recognition of place where user pointed. To minimize false detections, ROIs are generated within the compact search region using skin color detection result. The ROIs are verified by HOG-SVM and pointing direction is computed by both detection results of head-shoulder and hand. In experiment, it is shown that proposed method shows good performance for hand detection.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.2
• /
• pp.121-128
• /
• 2004

As the first step of the real time monitoring system of the solar radio disturbance, we constructed the control system of the solar radio telescope. An 1.8m antenna built by Korean Astronomy Observatory has been used, and the observed radio flux is transformed to the digital signal by the powermeter. We have also developed a computer program CBNUART in order to control the telescope system and the powermeter. As the sun rises, the telescope begins to observe the sun, and ends the observation automatically at sunset. The CBNUART enables the telescope automatically to go to the position of the sunrise for the beginning the observation and come back to the setposition after the ending the observation at the sunset. An active tracking routine is adopted in order to improve the tracking accuracy of the control system, and we used an optical telescope equipped in front of the antenna for control test. The tracking test shows that our control system can track with the accuracy of arc seconds, and the 50 minute pointing test shows that the pointing accuracy of right ascension and declination are 1.12 and 0.08 arc minutes respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.161-170
• /
• 2007

This paper is a matter of remote control apparatus and display remote control system comprising the same. The remote controller is a wireless remote pointing device that is included a function of mouse and a function of remote controller for VOD etc. It is assembled a sending signal part to communicate with display device, a image sensor part to capture a scene of front view and a main body. Also, it includes a control part that analyzes the captured image, calculates a relative moving factor that main body is moved by user, and then controls the mouse cursor on the display device. The remote control apparatus is able to capture a seen of front view, to analyze the captured image, and to move a mouse cursor point on the display device as much as it calculated relative moving factor. Therefor it brings don the cost of production by a product desist that is increased user satisfaction. And it, using the patent and the new product desist, will make an epoch in development of the remote control system for Ubiquitous broadcasting industry.

• Journal of Power System Engineering
• /
• v.20 no.5
• /
• pp.66-71
• /
• 2016

The measurements of heat transfer and total friction factors for turbulent flows in the convergent rectangular channels with two opposite in-line ribbed walls are reported. The study has covered three different angled ribs ($30^{\circ}$, $45^{\circ}$ and $60^{\circ}$) and Reynolds number in the range of 22,000 to 75,000. The channel, composing of ten isolated copper sections in the length of test section of 1 m, has the channel convergence ratio of $D_{ho}/D_{hi}=0.67$. The results show that the ribs pointing downstream (${\wedge}-shaped$) is somewhat greater than the ribs pointing upstream (V-shaped) in the dimensionless Nusselt number and total friction factors.