• 한국의류학회지
• /
• 제27권5호
• /
• pp.485-495
• /
• 2003

This study was to compare and analyze the clothing pressure according to arms movements of 4 brands jacket for middle-aged women group by measuring clothing pressure of each brand. The results were as follows: 1. According to the analysis of jackets of 4 brands, in general, jacket C had the largest ease amount. while jacket A had a large ease amount in waist, hip areas compared with bust area. Also jacket B had a small ease amount in bust, waist areas and jacket D had a small ease amount in hip areas. Therefore the ease amount is different between each brand, each size even though jacket designs are similar. 2. It was found that clothing pressure was affected by arm movements than jackets. Since this study was limited to the arm movement for motion variation, it was recognized that a significant difference among each jacket and each movement at shoulder, waist parts existed with relation to this motion. 3. Parts showing a significant difference among each size were bust point, abdomen point, center back point of abdomen level, angulus superior scapulae point and center back point of waist level. Also clothing pressure of size B91 was bigger than size B88 except Center back point of waist level. 4. Clothing pressure in shoulder point, front armpit point, back armpit point, upper arm point areas increased as the angle of the arms movement increased. Also, individual variation of clothing pressure in front armpit point, back armpit point, armpit point and upper arm point was large, and clothing pressure in abdomen point was high in M5(sitting posture).

• 한국의상디자인학회지
• /
• 제25권3호
• /
• pp.157-164
• /
• 2023

The purpose of this study is to compare and analyze bust point information presented in literature and the 8th Korean Anthropometric Survey (Size Korea 2021) as a basis for pattern making for Korean adult women. Therefore, the the bust point position was analyzed through the length from the side neckline to the bust point and the horizontal length from the bust point to the chest. The results are as follows. First, Size Korea's population shows an increase in bust circumference and Side Neck Point to Bust Point with age, with the largest Bust-Point Breadth in the 30s, followed by the 20s, 40s, 60s, and 50s. Second, the Bust-Point Breadth in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee, which were created from the bust circumference measurements of Size Korea's population, was wider than the measurements, and the difference was verified as a highly significant. Third, in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee created with the bust circumference dimensions of Size Korea's population, the length of Neck Point to Bust Point was shorter than the measured value, and the difference was highly significant. Fourth, the Bust-Point Breadth and Neck Point to Bust Point in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee, which were created with the bust circumference of the population of Size Korea by age, were analyzed in different age groups and showed significant differences from the measurements of Size Korea.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.783-787
• /
• 2009

A point-to-mesh type discharge system, utilizing a water-pen point as a corona discharge electrode and a mesh as an ion induction electrode, has been proposed, and the effect of the water-pen point electrode of the discharge system to the ionic wind velocity and generation yield was investigated. It was observed that the proposed discharge system with the water-pen point electrode can generate a higher ionic wind velocity as compared with that of the metal point electrode. As a result, the peak ionic wind velocities of 2.61 and 4.05 m/s for the positive and negative corona discharges of the proposed discharge system can be obtained, which are 1.39 and 1.15 times higher than those of the metal point electrode with same design. The ionic wind generation yield of 4.72 m/s/W of the discharge system with the water-pen point electrode was obtained for the positive corona, which was 3.66 times higher than that of the metal point electrode. This enhancement may be due to the effect of the water-pen point electrode.

• 한국측량학회지
• /
• 제30권4호
• /
• pp.335-342
• /
• 2012

건축, 토목, 의료, 컴퓨터 그래픽스 분야 등 다양한 분야에서 이용되는 3D point cloud는 최근 레이저 스캐너의 발달로 인해 그 용량이 점점 커지게 되었다. 컴퓨터 메모리의 용량을 넘어서서 모든 데이터를 한 번에 처리할 수 없는 대용량 3D point cloud를 가시화하고 편집하기 위해 여러 전처리 및 가시화 방법들이 소개되었고 본 논문에서 비교한 QSplat의 경우 3D 모델의 형상 확인과 용량 감소를 목적으로 원본 좌표를 손실 압축하여 저장하였다. 본 논문에서 제시하는 방법은 3D point cloud를 정육면체 격자로 분할하고 center sampling을 통해 가상점 집합을 생성하며 가시화 과정에서 격자에 저장된 point 집합 취득을 통한 빠른 렌더링이 가능하다. 홍익대학교 인근 지역을 측정한 약 1억 2천만 개 point의 대용량 3D point cloud를 QSplat과 다단계 정육면체 격자 기반 방법으로 비교한 결과 전처리 과정에서는 QSplat이, 가시화 과정에서는 다단계 정육면체 격자 기반 방법이 빠른 속도를 보여주었다. 또한 다단계 정육면체 격자 기반 방법은 point의 원본 좌표를 저장하기에 추후 가시화 외에 편집, segmentation 등의 작업을 고려하여 고안되었다.

• 경영과학
• /
• 제20권2호
• /
• pp.179-196
• /
• 2003

Function point model is the international standard method to measure the software size which is one of the most important factors to determine the software development cost. Function point model can successfully be applied only when the detailed specification of users' requirements is available. In the domestic public sector, however, the budgeting for software projects is carried out before the requirements of softwares ere specified in detail. Therefore, an efficient function point estimation method is required to apply function point model at the early stage of software development projects. The purpose of this paper is to compare various function point estimation methods and analyse their accuracies in domestic software projects. We consider four methods : NESMA model, ISBSG model, the simplified function point model and the backfiring method. The methods are applied to about one hundred of domestic projects, and their estimation errors are compared. The results can used as a criterion to select an adequate estimation model for function point counts.

• 한국안전학회지
• /
• 제22권3호
• /
• pp.88-97
• /
• 2007

A point based speed enforcement system(SES) has been widely used in roadways to reduce the operating speeds and potential traffic accidents. Recently, the needs for introudcing new SES using point-to-point speed measurement was presented, however, no practical guidelines or justification of the system was available. This study investigated the effectiveness of the current SES and introduction of the new SES through user interview survey method. Survey results showed that 33% of respondents were unsatisfactory to the current way of SES operation, which was 11% higher than satisfactory respondents, and about 70% of the respondents supported the introduction of point-to-point based SES operation. A majority of respondents preferred the straight roadway segment, bridge and tunnel, and curved roadway segment for a start application site with the segment length of 1-5 km long. Using these survey results, an introduction scheme was discussed in terms of legal bases, installation criteria, and operational guidelines.

• Structural Engineering and Mechanics
• /
• 제5권5호
• /
• pp.577-586
• /
• 1997

In nonlinear finite element stability analysis of structures, the foremost necessary procedure is the computation to precisely locate a singular equilibrium point, at which the instability occurs. The present study describes global and local procedures for the computation of stability points including bifurcation points and limit points. The starting point, at which the procedure will be initiated, may be close to or arbitrarily far away from the target point. It may also be an equilibrium point or non-equilibrium point. Apart from the usual equilibrium path, bypass and homotopy path are proposed as the global path to the stability point. A local iterative method is necessary, when it is inspected that the computed path point is sufficiently close to the stability point.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.285-287
• /
• 2010

It is recently enlarged to necessity of 3D spatial information model in urban areas. and in order to that, It is increased to use the terrestrial LiDAR. The Point clouds which are received by terrestrial LiDAR take a relateive coordinate. For transform into absolute coordinate, it carry out GPS surveying. However, it is difficult to geo-referencing of point clouds using the GPS due to high buildings and facilities in urban area. This study suggests a methodology, that is geo-referencing of point clouds which is received from terresstrial LiDAR in urban area and then verified accuracy of geo-referencing of point clouds. In order to geo-Referencing of point clouds which are received in Engineering building of Yonsei Univ., it was be setout through GPS surveying, and then obtained absolute coordinate of real building. Using this coordinate, It was operated geo-referencing of point clouds, verified accuracy between check point and geo-referenced point clouds. As a result, RMSE of check point shows that GPS surveying is 6.9~8.0cm.

• 전자공학회논문지
• /
• 제52권6호
• /
• pp.95-104
• /
• 2015

최근 모바일 기기의 발전으로 사용자의 위치를 수집하고 분석하는 방법들이 연구되고 있다. 사용자의 특성을 파악하고 궤적 예측 및 패턴을 추출하기 위해 의미 기반 위치 기록을 사용하는 방법이 있다. 의미 기반 위치 기록을 사용하기 위해서는 사용자의 GPS로그를 분석하여 Stay Point를 추출하는 과정이 선행되어야 한다. 기존의 Stay Point 추출 방법은 임의의 중간좌표 즉, 사용자가 실제로 머무르지 않은 지점을 추출하기 때문에 정확하게 사용자가 머무른 위치라고 할 수 없으며, 실내와 실외의 Stay Point를 구분하지 못하는 단점이 있다. 본 논문에서는 이러한 단점을 보완하기 위해 사용자가 실제로 머무른 지점 및 실내에서 머무른 지점만을 추출하는 Stay Point를 제안한다. 기존의 방식으로 추출된 Stay Point에서 가장 가까운 GPS 좌표를 Stay Point로 지정하는 방식(nearSP)과, 사용자가 건물에 들어간 지점을 Stay Point로 지정하는 방식(indoorSP)이다. 제안한 알고리즘은 기존 Stay Point 추출 방법보다 Output 데이터의 용량 감소 및 위치의 정확성이 향상되었고, 실내와 실외를 구분 할 수 있음을 확인할 수 있었다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 추계학술발표대회
• /
• pp.528-529
• /
• 2023

Due to vast points and irregular structure, labeling full points in large-scale point clouds is highly tedious and time-consuming. To resolve this issue, we propose a novel point-based transformer network in weakly-supervised semantic segmentation, which only needs 0.1% point annotations. Our network introduces general local features, representing global factors from different neighborhoods based on their order positions. Then, we share query point weights to local features through point attention to reinforce impacts, which are essential in determining sparse point labels. Geometric encoding is introduced to balance query point impact and remind point position during training. As a result, one point in specific local areas can obtain global features from corresponding ones in other neighborhoods and reinforce from its query points. Experimental results on benchmark large-scale point clouds demonstrate our proposed network's state-of-the-art performance.