• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.5128-5134
• /
• 2011

본 논문에서는 HEV용 영구자석 매립형 동기전동기의 단위전류 당 최대토크 운전을 위한 dq 전류 궤적에 대하여 고찰하였다. 전동기 상수로부터의 단위전류 당 최대토크 운전을 위한 dq 전류를 해석하고, 이를 바탕으로 영구자석의 자속 및 dq 인덕턴스 등의 전동기 상수가 변할 경우 단위전류 당 최대토크 운전점의 변화를 고찰하였다. 또한 단위전류 당 최대토크 제어를 위한 dq 전류의 궤적을 실험을 통하여 검증하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권3호
• /
• pp.238-243
• /
• 2009

This paper present same thodology for the classification of power system voltage stability, the trajectory of which to instability is monotonic, using an interior point method based support vector machine(IPMSVM). The SVM based voltage stability classifier canp rovide real-time stability identification only using the local measurement data, without the topological information conventionally used.

• 한국항행학회논문지
• /
• 제12권4호
• /
• pp.295-303
• /
• 2008

고속으로 장거리를 비행하는 위성발사체는 고장 시 큰 위험을 줄 수 있으므로, 비행 궤도를 감시하고 고장여부를 판단하는 비행안전 시스템의 운용이 필수적이다. 비행안전 시스템에 적용되는 필터는 일반적인 위치추적 필터와는 달리 필터 정확성 보다는 신뢰성이 우선 시 되어야 하고, 정확한 순간낙하점 추정을 위해서는 궤도 위치뿐만 아니라 속도 역시 중요하게 여겨져야 한다. 본 논문에서는 KSLV-I 위성발사체 발사 시 운용되는 추적 센서를 적용하는 융합필터를 구성하고 궤도 및 순간낙하점을 계산하여 구성된 필터의 성능을 시험하였다.

• Nuclear Engineering and Technology
• /
• 제52권9호
• /
• pp.2017-2024
• /
• 2020

In this study, a fractional order proportional integral derivative (FOPID) controller is designed to create the reference power trajectory and to conquer the uncertainties and external disturbances. A fractional nonlinear model was utilized to describe the nuclear reactor dynamic behaviour considering thermal-hydraulic effects. The controller parameters were tuned using optimization method in Matlab/Simulink. The FOPID controller was simulated using Matlab/Simulink and the controller performance was evaluated for Hard variation of the reference power and compared with that of integer order a proportional integral derivative (IOPID) controller by two models of fractional neutron point kinetic (FNPK) and classical neutron point kinetic (CNPK). Also, the FOPID controller robustness was appraised against the external disturbance and uncertainties. Simulation results showed that the FOPID controller has the faster response of the control attempt signal and the smaller tracking error with respect to the IOPID in tracking the reference power trajectory. In addition, the results demonstrated the ability of FOPID controller in disturbance rejection and exhibited the good robustness of controller against uncertainty.

• 한국정보통신학회논문지
• /
• 제18권4호
• /
• pp.906-912
• /
• 2014

물고기 로봇 연구는 몸체 및 꼬리 관절 궤적의 크기나 주파수의 크기에 따른 로봇의 추력 비교 또는 꼬리 관절 궤적을 적절한 함수로 선정하여 물고기 로봇의 빠른 회전 등과 관련된 연구가 주를 이루고 있다. 본 연구에서는 물고기 로봇이 추력을 받아 앞으로 유영할 경우, 로봇의 몸체 및 꼬리 관절이 사인파와 같이 좌, 우로 요동치며 움직이므로 피드백 제어를 행하기 어렵다. 따라서 물고기 로봇의 경로에 기초한 가상의 위치를 검출하고, 검출된 위치를 사용하여 주어진 경로 위의 예견 점(look-ahead point)을 기준으로 방향 오차를 정의하여 물고기 로봇이 경로를 추종하도록 제어기를 설계하였다. 모의실험 결과 제안된 방법의 유용성을 확인할 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권5호
• /
• pp.2310-2325
• /
• 2016

In this paper, we provide a trajectory-generation algorithm that can identify pedestrians in real time. Typically, the contours for the extraction of pedestrians from the foreground of images are not clear due to factors including brightness and shade; furthermore, pedestrians move in different directions and interact with each other. These issues mean that the identification of pedestrians and the generation of trajectories are somewhat difficult. We propose a new method for trajectory generation regarding multiple pedestrians. The first stage of the method distinguishes between those pedestrian-blob situations that need to be merged and those that require splitting, followed by the use of trained decision trees to separate the pedestrians. The second stage generates the trajectories of each pedestrian by using the point-correspondence method; however, we introduce a new point-correspondence algorithm for which the A* search method has been modified. By using fuzzy membership functions, a heuristic evaluation of the correspondence between the blobs was also conducted. The proposed method was implemented and tested with the PETS 2009 dataset to show an effective multiple-pedestrian-tracking capability in a pedestrian-interaction environment.

• 한국산업융합학회 논문집
• /
• 제18권2호
• /
• pp.99-109
• /
• 2015

This study proposes a new approach to analyze the impedance and the elasticity of a serial chain of spring-damper system, areal-time collision-free trajectory generation algorithm is proposed. The reference points on a trajectory connected by the spring-damper system have a mechanism for self-position adjustment to solve a collision problem by the impedance, and the local adjustment of each reference point is propagated through the elasticity to a real robot at the end of the spring-damper system. As a result, the overall trajectory consisting of the reference points becomes free of collision with environmental obstacles and efficient having the shortest distance as possible. In this process,, the reference points connected by the spring-damper system take role of virtual robot as global guidance for a real robot, and a cooperative is carried out by the system of robots. A control technology is proposed to implement for mobile robot.

• 한국대기환경학회지
• /
• 제12권2호
• /
• pp.167-177
• /
• 1996

To investigate the source-receptor relationships aerosol model has been used to simulate the distribution behavior of the yellow sand. Data for meteorological fields were obtained by Meso-scale Analysis and Prediction Model System/Seoul National University (MAPMS/SNU) for five days (10-14 April 1988). To obtain the distributions of concentration of yellow sand,the aerosol model has been modified to allow quantifications of relative concentration distributions of yellow sand. Source regions of yellow sand were delineated by soil maps of China and emission rate as a function of wind stress(Westphal et al., 1987). Using 3-dimensional wind fields the backward trajectories from 3 receptor grids at the layer of .sigma. =0.95, 0.9, 0.85, 0.8 were calculated. In order to facilitate quantitative assessment of source-receptor relationships, it was assumed that the perturbations in along-trajectory and cross-trajectory proceed linearly with time, in accord with Gaussian distribution characteristics. On the basis of this assumption, the probability fields were calculated from every grid point with source strength 1. Using these probability fields and emission retes, the potential contributions of upstream sources along the trajectories were estimated. The results of this study indicate that the application of trajectory modeling is useful in investigating the quantitative relationship between source and receptor regions.

• 한국항공우주학회지
• /
• 제34권5호
• /
• pp.46-55
• /
• 2006

비행체의 궤적 최적화를 위해서는 비행체의 특성을 반영한 3차원 운동방정식이 유도되어야 하며, 비행선과 같이 공기보다 가벼운 비행체의 경우는 일반 고정익 항공기와는 다른 특성들을 반영하여야 한다. 본 연구에서는 중고도 무인비행선의 궤적 최적화를 위해 비행선의 운동방정식을 유도하고, 이를 이용한 최소시간 문제를 다루었다. 최적 궤적을 얻기 위하여 최적 궤적 문제를 제어입력 파라미터화를 이용한 비선형 프로그래밍 문제로 변환한 후 연속 2차 계획법을 이용하여 궤적을 산출하였으며, 이에 대한 수치결과를 나타내었다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.25.3-26
• /
• 2008

The direct way to the moon is to start from the parking orbit by using impulsive thruster In previous domestic research, the direct way has been studied by using a single impulsive shot. However, when a single impulsive shot occurs to go into a Translunar orbit, gravity losses occur because thruster is not impulsive shot but the finite burns and it causes the gravity losses. To make up for the weak point of a single impulsive shot, this paper divides TLI (Trans Lunar Injection) into several small burns. Therefore, departure loop trajectory and the Translunar trajectory. This method is useful not only to reduce the gravity losses but also to check the condition of satellite. By using this method, this paper demostrates the optimized trajectory from Earth parking orbit to lunar mission orbit which minimizes the fuel, and the SNOPT (Sparse Nonlinear OPTimizer software) is used to find optimal solution. Also, this paper provides lunar mission profile which includes the mission schedule when TLI, LOI (Lunar Orbit Insertion) maneuvers occur, a mount of fuel when thruster is used and other mission parameters.