• The Mathematical Education
• /
• v.51 no.4
• /
• pp.471-484
• /
• 2012

It is not easy to find the auxiliary line to solve the problem in connection with the circle, where it is the problem finding the central angle or angle at the circumference in a circle. The purpose of the study is to give an aid for this difficulties. The angle at the circumference is closely related to the arc. And so we looked into the problem in connection with the angle at the circumference in point of view of the arc. We have got the following the results. It is not necessary to draw the auxiliary line when solving the problem in connection with the angle at the circumference in point of view of the arc. And we can find the reason to draw the specific auxiliary in point of view of the arc. We hope that the results of research are given aids to a lot of students.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.984-993
• /
• 2009

There have been growing concerns of algal growth at Daecheong reservoir due to eutrophication with excess nutrient inflow. Rainfall-driven runoff and pollutant from watershed are responsible for eutrophication of the Daecheong reservoir. In this study, two subwatersheds of the Daecheong reservoir were selected and water quality characteristics were analyzed. The L-THIA ArcView GIS model was used for evaluation of direct runoff and water quality. The $R^2$ and the EI value for direct runoff were 0.95 and 0.93 at Wol-oe watershed and were 0.81, 0.71 at An-nae watershed, respectively. The $R^2$ for SS, T-P were 0.53, 0.95 at Wol-oe watershed and 0.89, 0.89 at An-nae watershed, respectively. It has been proven that the L-THIA ArcView GIS model could be used for evaluating direct runoff and pollutant load from the watershed with reasonable accuracies.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.498-499
• /
• 2011

In this paper, the fundamental features of the arc stability DC arc furnace have been investigated, from the converter point of view. To compare of measurement arc data from DC arc furnace and the advanced arc simulations of magneto-hydrodynamics (MHD) and the well known Cassie-Mayr arc model have been extensively used. The MHD based arc simulation has been validated in the subcomponent level, for the free burning arc set up in the laboratory. The arc simulation predicted the arc voltage for different currents with the accuracy which satisfies engineering requirements. It has been shown that the arc current steepness at current zero determines the arc stability, and the associated peak arc resistance can be used as its quantitative measure. Based on the presented insight into the DC arc stability, a converter topology solution which realizes an optimal arc stability has been proposed. The main results presented in this paper provide a design guideline for the future DC arc furnace converter topology developments.

• Journal of Welding and Joining
• /
• v.8 no.3
• /
• pp.60-69
• /
• 1990

Plasma arc cutting is a fusion cutting process in which a gas-constricted arc is employed to produce a high-temperature, high-velocity plasma jet on the workpiece. This process provides some advantages such as increased cutting velocity, excellent working accuracy and the ability to cut special materials (widely used stainless steels and Al-alloys, for example), when compared with iconventional oxyfuel gas cutting. From the view point of price and reliability of the power source, plasma arc cutting has also some distinct advantages over laser beam cutting. High-speed machines with NC or CNC systems are needed for the plasma arc or laser beam cutting process, while for oxyfuel gas cutting, low-speed machines with copying templates or optical-shape tracking sensors can be applied. The low price and high flexibility of the microprocessor arc contributing more and more the application of CNC system in the plasma arc cutting process, as in other manufacturing fields. From these points of view, a microprocessor-based plasma arc cutting system was developed by using a reference-pulse system, and its performance was tested. The interpolating routines were programmed in the assembly language for saving the memory volume and improving the compouting speed, which has an intimate relationship with the available cutting velocity.

• Journal of Environmental Health Sciences
• /
• v.28 no.1
• /
• pp.1-10
• /
• 2002

This study was carried out to provide environmental information using geographic information system for the environmental manager engaged in governmental office. Point and nonpoint sources were classified by each small watershed and an administrative district. ArcView and ERDAS software were used to develop environmental information system. Small watershed was extracted into the DTEM using HEC-geoHMS which is ArcView extension. Study area was divided into 7 small watershed. Point sources were constituted as cattle, milk cattle, swine, and poultry. Land use was divided into forests, rice paddies, residential sites et al. User interface was designed to search information easily for the nonprofessional GIS users.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1139-1143
• /
• 2010

대청호 수질관리를 위한 대책 수립시 상류유역의 유출 및 오염부하배출 특성을 평가하는 것이 중요하다. 유역의 수환경 영향을 평가하기 위해서 복잡한 수문 수질 모델을 이용하는데 사용자 편의성을 고려한 모델 개발과 이용이 필요하다. L-THIA ArcView GIS 모형은 토지이용도, 토양도, 일강우 자료만으로 직접유출의 모의가 가능하여 전 세계적으로 널리 이용되고 있다. 본 연구에서는 L-THIA ArcView GIS 모형을 이용하여 대청호 상류유역인 안내천, 월외천 유역의 직접유출 및 비점오염 배출부하 특성을 평가하였다. 직접 유출량 평가 결과, 결정계수($R^2$)와 유효지수(EI)가 월외천 유역 및 안내천 유역에서 각각 0.95, 0.93 및 0.81, 0.71로 나타나, L-THIA ArcView GIS 모형이 실측치를 잘 재현하는 것으로 나타났다. 강우유출수에 포함된 SS 및 T-P 오염부하량 평가결과, 결정계수($R^2$)가 월외천 유역과 안내천 유역에서 각각 0.53, 0.95 및 0.89, 0.89로 평가되었다. 또한 유효지수(EI)가 월외천 유역과 안내천 유역에서 각각 0.44, 0.95 및 0.98, 0.99로 평가되었다. SS 부하량 평가 결과에서 월외천 유역이 안내천 유역보다 정확성이 낮은 것은 지역특성에 따라 SS 부하량 차이가 크기 때문이다. 따라서 L-THIA ArcView GIS 모형의 지속적인 개선이 이루어진다면 대청호 만입부 상류유역에서의 각종 수질관리대책 평가에 활용될 수 있을 것으로 판단된다.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.519-524
• /
• 2000

The goal of this research is the establishment of a connection of an existing water quality model to GIS. The water quality model investigated was the Water Quality Analysis Simulation Program (WASP5), while the actual linkage was performed using object-oriented programming. The runoff and the non-point source loadings into the Channel were determined using a grid-based model developed in GIS. Afterwards, scripts were written in the ArcView programming language, Avenue, in order for ArcView to perform the following tasks : 1) write the input file informations, 2) format the input information into the proper WASP5 file, 3) execute the WASP5 subprogram for modeling.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.4
• /
• pp.427-434
• /
• 2006

This paper analyzes arc phenomena including the secondary arc's elongation in the Korean 765kV single transmission line (79km) between Sin-Ansung S/S and Sin-Gapyeong S/S, which will be installed in Korea in June 2006. In particular, both frequency independent and frequency dependent line models are compared to make our final decisions. As well, the significant simulation results are investigated by the EMTP program. As a result, there is no need of HSGS in the Korean 765kV single transmission line from both a practical and an economical point of view.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2013.12a
• /
• pp.73-80
• /
• 2013

From broad point of view, seam tracking has been one of main issues with respect to welding automation. Several attempts have been successful for seam tracking of fixed weaving width. As a solution of the seam tracking methods for varying groove width, the visual sensors such as CCD cameras have been adopted. Although the vision sensing techniques can achieve high accuracy, the weak point is that well-prepared vision sensor environment should be required to obtain high-quality visual measurements which can be easily affected by significant noises in industrial areas. This paper proposed an alternative seam tracking algorithm for narrow groove. A special measurement device for arc voltage, in this study, is developed to enhance the reliability of the measured welding signals. Based on the developed arc sensor algorithm, an automatic weld-width tracking algorithm is also proposed, which is able to predict the weld-position more accurately. The usefulness of the automatic weld-width tracking algorithm was well verified by applying it to gas tungsten arc welding (GTAW).

• Journal of Welding and Joining
• /
• v.11 no.4
• /
• pp.44-56
• /
• 1993

The arc welding processes are substantially nonlinear, in addition to being highly coupled multivariable systems, Frequently, not all the variables affecting the welding quality are known, nor may they be easily quantified. From this point of view, decoupling between the welding parameters from the welding quality is very difficult, which makes it also difficult to control the welding parameters for obtaining the desired welding quality. In this study, a neural network based on the backpropagation algorithm was implemented and adopted for the selection of gas metal arc welding parameters of the fillet joint, that is, welding current, arc voltage and welding speed. The performance of the neural network for modeling the relationship between the welding quality and welding parameters was presented and evaluated by using the actual welding data. To obtain the optimal neural network structure, various types of the neural network structures were tested with the experimental data. It was revealed that the neural network can be effectively adopted to select the appropriate gas metal arc welding parameter of fillet joints for a given weld quality.