• 자원리싸이클링
• /
• 제27권5호
• /
• pp.30-37
• /
• 2018

국내 발생하는 고순도 탄탈륨 스크랩을 재활용하기 위해 수소화-탈수소화법(HDH법)에 의한 탄탈륨 분말 제조 연구를 실시하였다. 탄탈륨은 연성 및 강도가 우수하며 융점 또한 높아 분말 제조가 어려운 금속으로 알려져 있다. 따라서 본 연구에서는 수소화를 통해 생성된 탄탈륨 수소화물을 이용하여 탄탈륨 분말을 제조하였다. $500^{\circ}C$, 5시간/$700^{\circ}C$, 3시간 수소화 조건에서 탄탈륨 수소화물이 생성되었고, 탄탈륨 내의 수소는 격자의 팽창 및 전위의 결함으로 작용하므로 탄탈륨 수소화물 분말을 제조하기에 용이하였다. Ring mill을 이용하여 1300 rpm, 30분 이상의 조건에서 $10{\mu}m$ 이하의 크기로 분쇄하였으며, 알곤 및 저진공 분위기에서 탈수소화 공정을 통해 수소 50 ppm 이하의 탄탈륨 분말을 제조하였다.

• 디지털융복합연구
• /
• 제12권12호
• /
• pp.277-284
• /
• 2014

소프트웨어 고장분석을 위한 비동질적인 포아송과정에서 결함당 고장발생률이 상수이거나, 단조 증가 또는 단조 감소하는 패턴을 가질 수 있다. 본 논문에서는 결함의 기대값을 가정하는 유한고장소프트웨어 NHPP모형과 수리시점에서도 고장이 발생할 상황을 반영하는 무한고장 NHPP모형들을 비교 제시하였다. 소프트웨어 신뢰성분야에서 많이 인용되는 레일리분포를 이용한 유한고장과 무한고장 소프트웨어 신뢰성모형에 대한 비교문제를 탐색한 결과 무한고장모형이 유한고장모형보다 효율적으로 나타났다. 이러한 비교문제를 위하여 모수추정은 최우추정법을 이용하였다. 이 연구를 통하여 소프트웨어 개발자에게 소프트웨어 고장현상을 파악하는데 어느 정도 도움을 줄 수 있을 것으로 사료 된다.

• 한국사이버테러정보전학회:학술대회논문집
• /
• 한국사이버테러정보전학회 2004년도 제1회 춘계학술발표대회
• /
• pp.297-302
• /
• 2004

정보통시 기술의 비약적인 발전으로 인해 인터넷은 필수 불가결한 도구가 되고 있다. 이러한 정보화 시대의 요구에 대한 교육적 대응은 학습자중심의 교육이며, 정보통신 기술을 기반으로 한 원격 교육이다 WBI(Web Based Instruction)는 웹을 매체로 활용하여 원거리에 있는 학습자를 교육시키는 형태로서 교수자와 학습자간 상호작용을 가능하게 하고, 다양한 형태의 학습 자료를 제공하며 공간적 제약을 극복할 수 있다는 장점이 있다. 그와 더불어 차세대 웹 표준문서 포맷으로 부상되고 있는 XML(extensible Markup Language)을 사용한 규격에 대한 국내외적인 표준화 작업 또한 가속화되고 있으며 최근 XML 보안에 대한 연구가 활성화 되었다. 또한 XML 전자서명은 XML문서를 이용하는 여러 분야에 사용되어 전자서명 시스템간의 상호 연동성을 높일 수 있다. 그리고 앞으로 웹상에서 사용되어지는 공인인증서에 대한 소비자와 관리자의 금전적인 면에서 또한 사용자의 ID PW로 인한 보안적 측면을 고려한 방법으로 XML 전자서명 기법을 이용한 다중인 방식을 추가 시키는 방법이다. 이에 본 논문에서는 시스템 내에서 XML 전자서명 기법을 이용한 다중인증 원격교육 에이전트 시스템을 제안 하였다.

• 대한두개안면성형외과학회지
• /
• 제18권1호
• /
• pp.50-53
• /
• 2017

Trichilemmal cysts are common fluid-filled growths that arise from the isthmus of the hair follicle. They can form rapidly multiplying trichilemmal tumors-, also called proliferating trichilemmal cysts, which are typically benign. Rarely, proliferating trichilemmal cysts can become cancerous. Here we report the case of a patient who experienced this series of changes. The 27-year-old male patient had been observed to have a $1{\times}1cm$ cyst 7 years ago. Eight months prior to presentation at our institution, incision and drainage was performed at his local clinic. However, the size of the mass had gradually increased. At our clinic, he presented with a $5{\times}4cm$ hard mass that had recurred on the posterior side of his neck. The tumor was removed without safety margin, and the skin defect was covered with a split-thickness skin graft. The pathologic diagnosis was a benign proliferating trichilemmal cyst. The mass recurred after 4months, at which point, a wide excision (1.3-cm safety margin) and split-thickness skin graft were performed. The biopsy revealed a trichilemmal carcinoma arising from a proliferating trichilemmal cyst. This clinical experience suggests that clinicians should consider the possibility of malignant changes when diagnosing and treating trichilemmal cysts.

• 정보처리학회논문지D
• /
• 제9D권2호
• /
• pp.313-322
• /
• 2002

멀티미디어 회의는 크게 밀결합 회의와 소결합 회의로 구분되며, 전자의 경우는 ITU-T의 H.323 표준에 근거한 일대일 또는 다자간 멀티미디어 회의가 있고, 후자의 경우로는 H.323 표준을 확장한 ITU-T의 H.332 표준이 있다. H.332 표준을 근거로 한 소결합 멀티미디어 회의는 송수신 능력을 갖는 소수의 패널과 수신능력 만을 갖는 다수의 청중들로 이루어진다. H.332에서는 참가자가 다수일 때 능력교환의 어려움을 극복하기 위해 회의의 주제나 미디어 형식등을 회의가 열리기 전에 미리 알리며 이를 위해 IETF의 SDP를 이용한다. 이와 같은 방법으로 H.323 멀티미디어 회의의 단점인 확장성을 극복할 수 있다. 본 논문에서는 소결합 멀티미디어 회의를 위하여 표준화되고 있는 H.332를 분석하고, 분석된 결과를 토대로 구현된 시스템을 소개한다.

• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.475-486
• /
• 2015

Mode II fracture toughness ($K_{IIc}$) of fiber reinforced concrete (FRC) has been widely investigated under various patterns of test specimen geometries. Most of these studies were focused on single type fiber reinforced concrete. There is a lack in such studies for hybrid fiber reinforced concrete. In the current study, an experimental investigation of evaluating mode II fracture toughness ($K_{IIc}$) of hybrid fiber embedded in high strength concrete matrix has been reported. Three different types of fibers; namely steel (S), glass (G), and polypropylene (PP) fibers were mixed together in four hybridization patterns (S/G), (S/PP), (G/PP), (S/G/PP) with constant cumulative volume fraction ($V_f$) of 1.5 %. The concrete matrix properties were kept the same for all hybrid FRC patterns. In an attempt to estimate a fairly accepted value of fracture toughness $K_{IIc}$, four testing geometries and loading types are employed in this investigation. Three different ratios of notch depth to specimen width (a/w) 0.3, 0.4, and 0.5 were implemented in this study. Mode II fracture toughness of concrete $K_{IIc}$ was found to decrease with the increment of a/w ratio for all concretes and test geometries. Mode II fracture toughness $K_{IIc}$ was sensitive to the hybridization patterns of fiber. The (S/PP) hybridization pattern showed higher values than all other patterns, while the (S/G/PP) showed insignificant enhancement on mode II fracture toughness ($K_{IIc}$). The four point shear test set up reflected the lowest values of mode II fracture toughness $K_{IIc}$ of concrete. The non damage defect concept proved that, double edge notch prism test setup is the most reliable test to measure pure mode II of concrete.

• 전자공학회논문지A
• /
• 제31A권12호
• /
• pp.80-90
• /
• 1994

To develop VLSI of higher packing density with 0.5.mu.m gate length of less, semiconductor devices require shallow junction with higher doping concentration. the most common method to form the shallow junction is ion implantation, but in order to remove the implantation induced defect and activate the implanted impurities electrically, ion-implanted Si should be annealed at high temperature. In this annealing, impurities are diffused out and redistributed, creating deep PN junction. These make it more difficult to form the shallow junction. Accordingly, to miimize impurity redistribution, the thermal-budget should be kept minimum, that is. RTA needs to be used. This paper reports results of the diffusion characteristics of PSG film by varying Phosphorus weitht %/ Times and temperatures of RTA. From the SIMS.ASR.4-point probe analysis, it was found that low sheet resistance below 100 .OMEGA./ㅁand shallow junction depths below 0.2.mu.m can be obtained and the surface concentrations are measured by SIMS analysis was shown to range from 2.5*10$^{17}$ aroms/cm$^{3}$~3*10$^{20}$ aroms/cm$^{3}$. By depending on the RTA process of PSG film on Si, LDD-structured nMOSFET was fabricated. The junction depths andthe concentration of n-region were about 0.06.mu.m. 2.5*10$^{17}$ atom/cm$^{-3}$ , 4*10$^{17}$ atoms/cm$^{-3}$ and 8*10$^{17}$ atoms/cm$^{3}$, respectively. As for the electrical characteristics of nMOS with phosphorus junction for n- region formed by RTA, it was found that the characteristics of device were improved. It was shown that the results were mainly due to the reduction of electric field which decreases hot carriers.

• 한국의학물리학회지:의학물리
• /
• 제15권1호
• /
• pp.17-22
• /
• 2004

Multileaf collimator (MLC) is now rapidly replacing the lead ahoy block to shape the radiation treatment field. In addition to its defect of rectangular field shaping and increased penumbra width, it has another possible problem, and that is of radiation transmission between leaves, which needs to be maintained at as low a level as is permissible. The authors measured and analyzed the inter-leaf and cross-leaf transmissions of MLC by Varian Associates Inc, before its clinical application. The inter-leaf and cross-leaf transmissions were calculated by comparing the measured point doses in the polystyrene phantom in the open field and in a total closure of MLC. The beam profile of the inter-leaf and cross-leaf transmissions were depicted by using a water phantom. A photon beam of 6 MV was used in the measurement. The inter-leaf transmission was 1.63∼1.67%, indicating that the shielding effect of MLC is excellent. However, the cross-leaf transmission in the central area was 18.4∼18.7% and this is well over the clinically acceptable limitation of 5%. The beam profile of cross-leaf transmission displayed 80∼90% transmission near the field edge, so that the cross-leaf transmission was 14∼17% in this area. The multileaf collimator has an excellent shi디ding effect and the inter-leaf transmission is negligible so that it can be used in clinic as a good replacement of the conventional lead alloy block. However, care must be taken to avoid the cross-leaf transmission in the radiation field.

• Archives of Reconstructive Microsurgery
• /
• 제19권1호
• /
• pp.21-28
• /
• 2010

Purpose: To report the clinical results of the use of arterialized venous free flaps in reconstruction in soft tissue defects of the finger and to extend indications for the use of such flaps based on the clinical experiences of the authors. Materials and Methods: Eighteen patients who underwent arterialized venous free flaps for finger reconstruction, between May 2007 and July 2009 were reviewed retrospectively. The mean flap size was 4.7${\times}3.2$ cm. The donor site was the ipsilateral volar aspect of the distal forearm in all cases. There were 8 cases of venous skin flaps, 5 cases of neurocutaneous flaps, 4 cases of tendocutaneous flaps, 1 case of innervated tendocutaneous flap. The vascuality of recipient beds was good except in 4 cases (partial devascuality in 2, more than 50% avascuality (bone cement) in 2). Results: All flaps were survived. The mean number of included veins was 2.27 per flap. Mean static two-point discrimination was 10.5 mm in neurocutaneous flaps. In 3 of 5 cases where tendocutaneous flaps were used, active ROM at the PIP joint was 60 degrees, 30 degrees at the DIP joint and 40 degrees at the IP joint of thumb. There were no specific complications except partial necrosis in 3 cases. Conclusions: An arterialized venous free flap is a useful procedure for single-stage reconstruction in soft tissue or combined defect of the finger; we consider that this technique could be applied to fingers despite avascular recipient beds if the periphery of recipient bed vascularity is good.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.299-307
• /
• 2005

The 180 km/h Korean Tilting Train(TTX) which is now developing as a part of the Korean National R&D project, was elaborately designed. As the tilting trains run curve track with the $30\%$ higher speed than normal trains, the higher centrifugal and dynamic force are expected. Furthermore the complex tilting system increase the probability of failure. Therefore it is very important for tilting train to ensure safety against derailment under the various kind of failed condition in the middle of running as well as normal operating condition. The TTX train have the relatively high roll stiffness to improve the lateral ride comfort and to limit the roll displacement on the curve. But the higher roll stiffness increase the risk of derailment on the twisted track. This paper describes the study to review the safety against derailment caused by the wheel unloading on the severely twisted track. The worst combination of maximum cant change with maximum twist defect was established by numerical simulation. And also it was assumed that the air bag deflated and still the train run its speed limit. Those kind of assumption might be the worst case from the view point of wheel unloading derailment on the twisted track. The dynamic simulation was done by means of VAMPIRE S/W and non-linear transient analysis. We found that derailment quotients Q/P was only slightly influenced by track twist but the wheel unloading was greatly influenced. And we ascertained that the higher roll stiffness the higher wheel unloading. In case of air bag deflated situation, the wheel unloading reached up to $100\%$ which means the wheel lift or jumped. Therefore it was concluded that the design need to be improved to ensure the safety against derailment on the maximum twisted track in case of air bag deflated and tilting train's speed limit.