• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1181-1186
• /
• 2022

In this study, we have researched for a high-efficiency display with low power, less complicated configuration, and more attractive features than using conventional displays (CRT, LCD, LED, etc.) by manufacturing a propeller display using the POV(Persistence of Vision) phenomenon. After setting the reference point using the Hall sensor, the channel recognition signal and voice recognition signal are transmitted to the display using Bluetooth through the mobile phone application created based on the App program, and the display performs different operations according to the commanded Bluetooth signal. Finally, it was confirmed that the desired information is expressed on the display screen at a motor speed of 1,030 rpm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.270-275
• /
• 2012

This paper presents a portable and compact optical device which can conveniently be used to perform a functional analysis of human liver function. The proposed system employed red/green LEDs, as a light source, and CMOS image sensor, which is commonly used in cellular phones. With this system, several blood serum samples have been evaluated for liver functional analysis by measuring light absorption level through the blood serum samples depending on aspartate aminotransferase (AST), alanine aminotransferase (ALT), and total bilirubin concentration. The light absorption through the blood serum samples containing AST, ALT, or total bilirubin can provide their concentrations. The green light absorption is more sensitive to the concentration of AST or ALT, and the red light absorption is more sensitive to the total bilirubuin concentration. Additional calibration steps were performed by using a MATLAB program in order to eliminate the light scattering effects from the extraneous particles existing in each blood serum sample. From the blind test, three standard light intensity curves through each enzyme have been obtained and the enzyme concentration values have been compared to those obtained from a commercially available biochemistry analyzer (Toshiba 200 FR). The average percent difference in the obtained concentrations from two systems for AST, ALT, and total bilirubin concentration came out to be 7.79%, 7.98%. and 7.56%, respectively, with the adjusted coefficient of determination (R2) higher than 0.98. This system can possibly lead to a low-cost and simple system that can be used as a point-of-care (POC) system in a condition without advanced equipments.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.6
• /
• pp.830-837
• /
• 2016

The purpose of this study was to investigate the effect of monochromic light-emitting diode (LED) light with different color on the growth and reproductive performances of white Roman breeder geese. A randomized complete batch design was utilized for the trial, and the replicate was regarded as one batch. Twenty ganders and fifty-five dames were used in batch 1 (started on 2011/6/17 and ended on 2012/1/31), thirty ganders and eighty-four dames were used in batch 2 (started on 2012/3/23 and ended on 2012/10/26), and thirty ganders and seventy-two dames were used in batch 3 (started on 2013/3/12 and ended on 2013/12/20). Two hundred and ninety-one geese were randomly assigned to 6 rooms in an environmentally controlled house. They were randomly allotted into one of three monochromatic light treatments: Blue, red, or white. The results showed that there was no significant difference in body weight among the three lighting groups at any point throughout the experimental period. However, compared to the blue light group, significantly more eggs were produced by the red and white light groups (p<0.05). Furthermore, the laying period of the red light group was significantly longer than that of other two groups (p<0.05). In conclusion, our results suggested that red LED-light has the best effect on reproductive performance (i.e. longer laying period and higher total eggs number) at 30 lux light intensity, and is therefore a better choice for the management of breeding geese than blue or white LED-light.

• Journal of Biosystems Engineering
• /
• v.35 no.5
• /
• pp.310-315
• /
• 2010

The amount of salt intake of Korean people is 11.4 grams per a day, which is 2.3 times of the recommended daily salt intake by WHO - 5 grams of salt a day. The relationship between high salt consumption and increased risk of high blood pressure, observed not only in hypertensive but also in normotensive patients. High salt intake is also associated with an increased risk of heart attack, cerebral ischemia and osteoporosis. Therefore, this research is for developing a salt taste sensor to reduce sodium consumption and improve meal habits for the perception of a more bland taste of most foods. When the sensor was put into food sample, current intensity achieved with distribution cables. Current intensity was correlate with a simple equivalent of salt taste stimulus intensity. The salt taste sensor consists of salinity & temperature measuring probe, signal processing circuit and LCD display & LED warning light. When salinity is going over a set point, LCD displayer indicate salt taste on LCD panel by percent value (%), and at the same time, blue LED light change to red LED light. So we could know the grade of salt taste in soup before meals conveniently and objectively. The results show that operating range of 10 to $80^{\circ}C$ and accuracy of ${\pm}0.1%$ were achieved with an analysis time of about 2 or 3 sec. Moderate reductions in salt intake can help to avert adult diseases and lead a healthy life.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.523-523
• /
• 2012

As the wafer geometric requirements continuously complicated and minutes in tens of nanometers, the expectation of real-time add-on sensors for in-situ plasma process monitoring is rapidly increasing. Various industry applications, utilizing plasma impedance monitor (PIM) and optical emission spectroscopy (OES), on etch end point detection, etch chemistry investigation, health monitoring, fault detection and classification, and advanced process control are good examples. However, process monitoring in semiconductor manufacturing industry requires non-invasiveness. The hypothesis behind the optical monitoring of plasma induced ion current is for the monitoring of plasma induced charging damage in non-invasive optical way. In plasma dielectric via etching, the bombardment of reactive ions on exposed conductor patterns may induce electrical current. Induced electrical charge can further flow down to device level, and accumulated charges in the consecutive plasma processes during back-end metallization can create plasma induced charging damage to shift the threshold voltage of device. As a preliminary research for the hypothesis, we performed two phases experiment to measure the plasma induced current in etch environmental condition. We fabricated electrical test circuits to convert induced current to flickering frequency of LED output, and the flickering frequency was measured by high speed optical plasma monitoring system (OPMS) in 10 kHz. Current-frequency calibration was done in offline by applying stepwise current increase while LED flickering was measured. Once the performance of the test circuits was evaluated, a metal pad for collecting ion bombardment during plasma etch condition was placed inside etch chamber, and the LED output frequency was measured in real-time. It was successful to acquire high speed optical emission data acquisition in 10 kHz. Offline measurement with the test circuitry was satisfactory, and we are continuously investigating the potential of real-time in-situ plasma induce current measurement via OPMS.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.454-459
• /
• 2013

Recently, remote phosphors have been reported for application to white LEDs to provide enhanced phosphor efficiency compared with conventional phosphor-based white LEDs. In this study, a remote phosphor was produced by coating via screen printing on a glass substrate with different numbers of phosphor coating. The paste consists of phosphor, lowest softening glass frits, and organic binders. The remote phosphor could be well controlled by varying the phosphor content rated paste. After mounting the remote phosphor on top of a blue LED chip, CCT, CRI, and luminance efficiency were measured and values of 5300 K, 62, and 117 lm/W were respectively obtained in the 80 wt% phosphor with 3 coating layers sintered at $800^{\circ}C$.

• Journal of Sensor Science and Technology
• /
• v.24 no.2
• /
• pp.113-118
• /
• 2015

Intravenous (IV) infusion set is one of the most common treatment methods applied to hospitalized patients. However, it is necessary to check the injection of IV solution in order to prevent patients from any possible medical injuries. In this paper, using the optical sensors to detect exhaustion of IV solution was proposed. The optical sensor is coplanar structure composed of LED and photodiode which is installed according to focal distance of the lens. These two elements detect exhaustion of IV solution at the desired point conveniently. Through the results of experiments using various wavelength of LED (R.G.B), the blue LED was selected to the optimum light source. The suggested optical sensor can detect exhaustion of IV solution by the differences in the amount of light which is caused by properties such as total reflection, refractive index and scattering. From the implementation, the detector is applicable to both containers of IV solution, glass bottle and plastic pack. And also the result shows apparent differences according to existence of IV solution even if the IV solution color and illumination were changed.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.5
• /
• pp.129-139
• /
• 2021

This study categorized the viewpoint of cooperation between schools and communities into marketability and publicness, and the viewpoint of school education and lifelong education. The perspective of school education consider to utilize local resources for the growth of students. The lifelong education perspective sees cooperation between schools communities to support the learning of residents. While the marketability perspective pursues individual choices and diversity of opportunities, the publicness perspective focuses on ensuring citizens' right to learn and evenly distributing learning opportunities. From the point of view of school education, it seeks to utilize local resources for the growth and development of students, and in the view point of lifelong education schools are understood to support the learning activities of residents. Cooperation between schools and communities could be presented by categorizing them into private organization-led, educational authorities-led, and provincial authorities-led depending on the subject of the promotion. Recently, local governments and educational governments, schools and communities are developing to a stage where they cooperate to realize the vision of a educational community. For the cooperation between schools and communities the local community, cooperation between local government and educational government and the harmony between publicness and marketability are emerging as tasks.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1516-1519
• /
• 1997

With disseminationof Distributed Control Systems(DCS), the huge amounts of process operation data could have been available and led to figure out process behaviors better on the statistical basis. Until now, the statistical modeling technology has been susally applied to process monitoring and fault diagnosis. however, it has been also thought that these process information, extracted from statistical analysis, might serve a great opportunity for process operation improvements and process improvements. This paper proposed a general methodolgy for process operation improvements including data analysis, backing up the result of analysis based on the methodology, and the mapping physical physical phenomena to the Principal Components(PC) which is the most distinguished feature in the methodology form traditional statistical analyses. The application of the proposed methodology to the Balst Furnace(BF) process has been presented for details. The BF process is one of the complicated processes, due to the highly nonlinear and correlated behaviors, and so the analysis for the process based on the mathematical modeling has been very difficult. So the statisitical analysis has come forward as a alternative way for the useful analysis. Using the proposed methodology, we could interpret the complicated process, the BF, better than any other mathematical methods and find the direction for process operation improvement. The direction of process operationimprovement, in the BF case, is to increase the fludization and the permeability, while decreasing the effect of tapping operation. These guide directions, with those physical meanings, could save fuel cost and process operator's pressure for proper actions, the better set point changes, in addition to the assistance with the better knowledge of the process. Open to set point change, the BF has a variety of steady state modes. In usual almost chemical processes are under the same situation with the BF in the point of multimode steady states. The proposed methodology focused on the application to the multimode steady state process such as the BF, consequently can be applied to any chemical processes set point changing whether operator intervened or not.

• Journal of Korean Clinical Health Science
• /
• v.1 no.3
• /
• pp.49-61
• /
• 2013

Purpose. The purpose of this study is to analyze difference in quality of life related to health according to our country's social stratification. Methods. This study had analytical subjects as 7,992 adults(4,557 men, 3,435 women), who are included in a variable by social stratification among 15,691 people in the age group of 20~69 years old as examinees, based on the 4th Korea National Health and Nutrition Examination Survey. Results. This study obtained the following results. First, seeing the score of health-related life quality by social stratification, namely, the distribution of EQ-5D index, the new middle class(class II) was the highest(men with 0.966 point, women with 0.955 point). The agricultural self-employed class(class V) was indicated to be the lowest(men with 0.918 point, women with 0.866 point). In general, the more belonging to low social stratification led to having shown the lower aspect in EQ-5D index value. Second, as for the results of the hierarchical regression analysis, the factors of contributing to difference by social stratification in health-related quality of life were chronic disease, job stress, education, and income level in both men and women. The health behavior was grasped to be a factor of contributing only to women. Conclusions. To reduce difference in health-related quality of life according to social stratification in the future, the continuous investment is needed for supporting socially high-quality education and economic stability. The sphere of health will need to be given priority to the prevention of chronic disease and the development in effective management policy for the lower classes.