• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.151.2-151.2
• /
• 2014

Broadband impedances for the 3-GeV pohang light source-II (PLS-II) storage ring have been numerically estimated using a full three dimensional finite-difference time-domain code, CST particle studio. The total broadband impedance of all the vacuum components was estimated as 0.256 ohm, which is a small fraction of the total machine impedance budget.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.120-120
• /
• 2006

In our study grazing incidence X-ray scattering (GIXS) measurements with synchrotron radiation sources were conducted statically and in-situ for a series of nanoscale thin films prepared from nanoporous dielectrics, block copolymers, brush polymers, and molecular assemblies. All GIXS measurements were performed at the Pohang Accelerator Laboratory. The measured scattering data were analyzed in detail by using newly developed GIXS scattering theory. All GIXS results will be discussed in details with considering the materials chemistry and nanostructure formation process parameters.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.928-930
• /
• 1992

The design beam energy of PLS(Pohang Accelerator Laboratory) Linac is 2Gev. The linac employs total 11 units of modulators and klystrons. The maximum peak output powers of the modulators are 200MW (400kV, 500A, 4.4$\mu$S flat-top, 800$\Omega$ load) to drive the klystrons which have the peak microwave power of 80MW. Prior to the development of the 200MW modulators, a prototype 150MW modulator has been constructed and tested. We have achieved output pulses of 350kV, 420A and 3.5$\mu$S flat-top with 840$\Omega$ water load. In this article, the test results and computer simulations of charging, De-Q'ing, and discharging are presented.

• Polymer Science and Technology
• /
• v.21 no.4
• /
• pp.336-344
• /
• 2010

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.137.3-137
• /
• 1998

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.08a
• /
• pp.53-53
• /
• 2005

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.172-173
• /
• 2012

포항가속기 연구소에서는 4세대 가속기의 전자를 가속시키기 위해서 100ppm(0.01%) 이하의 고전압 안정도를 가진 200MW 펄스 모듈레이터가 요구된다. 그러므로 본 연구소에서는 고전압 안정도를 가진 고정밀 고전압 CCPS를 일반 CCPS와 병행하여 산업체와 함께 공동 개발을 진행하였다. 개발된 일반 CCPS의 사양은 50 kV, 30 kJ/sec, 600mA, 1000ppm이하이고, 고정밀 CCPS의 사양은 50 kV, 5 kJ/sec, 100mA, 100ppm이하이다. 본 논문에서는 CCPS의 개발 및 실제 모듈레이터에 설치하여 시험한 결과를 발표하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1859-1861
• /
• 2002

This paper attempts to discuss the pseudo-spark which is developed for high voltage and high current. The pseudo-spark switch is on the basic of the Paschen's law. The pseudo-spark switch fabricates the glass chamber. The pseudo-spark switch consists of hollow cathode, hollow anode, and trigger. The pseudo-spark switch is operated at the voltage of 20 kV and the pressure range of $20{\sim}80$ mtorr with He-gas. The switching current of the pseudo-spark switch was measured as 65 kA, and the duration of the pulse was about 100 ${\mu}s$. This paper describes the results of tests and the characteristics of the switch.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1562-1563
• /
• 2006

고출력 마이크로웨이브의 펄스 전원으로 PFN Marx 펄스 전원공급장치를 설계 및 제작하였다. PFN Marx는 커패시터와 인덕터 그리고 스파크 갭과 전원을 공급하는 전원공급장치와 전류 제한용 저항 또는 인덕터로 구성하여 제작을 하였다. 여기에 사용하는 스파크 갭 스위치는 개스를 채우는 방식으로 개스의 압력을 조정하여 스위치의 스위칭 전압을 조정하여 준다. PFN Marx는 커패시터와 인덕터가 직병렬로 구성이 되며 펄스폭과 PFN의 임피던스를 결정하는 중요한 요소이다. PFN Marx 펄스 전원공급장치를 시뮬레이션 및 제작하여 시험을 할 예정이며 요구되는 사양은 전압 수십 kV, 펄스 폭 수백 ns이다. 본 논문에서는 PFN Marx 펄스전원장치의 설계 및 시험에 대하여 고찰하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1599-1600
• /
• 2007

The DTL water skid cooling system and Resonant Control Cooling Systems (RCCS) will employ a control system that can be operated by a local, programmable logic controller (PLC), interfaced through a touch screen interface, mobile alarm SMS server system, or it can be operated through the PEFP global control system network. The RCCS is implemented using Experimental Physics and Control System (EPICS) based hardware and software and is integrated with other networked PEFP EPICS systems. This presentation discusses the features of the local control system.