• 제목/요약/키워드: PoI

검색결과 383건 처리시간 0.027초

항효모성물질(抗酵母性物質)에 관(關)한 연구(硏究) - (제 1 보)(第 1 報) 분리(分離) 및 그 생화학적작용(生化學的作用)과 성질(性質)에 대(對)해서 - (Studies on the inhibitory substance of yeast growth - (Part 1) Isolation and biochemical characteristics of yeast growth inhibitor -)

  • 서정훈;고영희
    • Applied Biological Chemistry
    • /
    • 제15권1호
    • /
    • pp.19-25
    • /
    • 1972
  • Astragalus membranaceus Bunge로 부터 항효모성물질(抗酵母性物質) Yeaststatic substance인 일종(一種)의 peptide (Astradix-P)를 얻었으며 이 물질(物質)의 특성(特性)은 다음과 같다. 1) 이 물질(物質)은 일종(一種)의 peptide이며 그 PI는 8.2로 나타났다. 2) 이 물질(物質)은 효모(酵母)의 증식(增殖)을 조해(阻害)하며 이 조해(阻害)는 정균효과(靜菌效果)에 기인(起因)한다. 3) 본(本) 물질(物質)은 열안정성(熱安定性)이 매우 커서 $100^{\circ}C$에서 10시간(時間), 혹은 $121^{\circ}C$에서 30분간(分間) 가열(加熱)하여도 거의 실활(失活)하지 않는다. 4) pH에 대(對)해서도 안정(安定)하며 $pH2{\sim}pH10$까지는 별(別) 영향(影響)이 없다. 5) 본(本) 물질(物質)의 작용(作用)에 있어서 glucose, sucrose, maltose등의 당류(糖類)는 그 농도(濃度)에 관계(關係)없이 전연(全然) 영향(影響)을 미치지 아니한다. 6) 본(本) 물질(物質)의 작용(作用)에 있어서 Mg, Ca, $PO_4$ 등 염류(鹽類)도 전연(全然) 영향(影響)을 미치지 않는다. 7) 본(本) 물질(物質)은 효모류(酵母類)의 생육(生育)을 억제(抑制)하며 그 유효농도(有效濃度)는 ${\mu}g/ml$의 범위(範圍)에 있으며 예(例)로서, Saccharomyces carlsbergensis, S. cerevisiae 등 균주(菌株)의 $G.I.\;_{50}$$4{\mu}g/ml$이며, S. coreanus, S. sake는 13, $18\;{\mu}g/ml$이며, Candida pulcherrima는 $3\;{\mu}g/ml$, C. tropicalis는 $38{\mu}g/ml$로 나타났다. 8) 본(本) 물질(物質)은 효모(酵母)의 alcohol 발효(醱酵)에 대(對)해서 전연(全然) 영향(影響)을 미치지 않는다.

  • PDF

시각과 고유수용성 감각이 요부 운동의 정확도에 미치는 영향 (The Effect of Vision and Proprioception on Lumbar Movement Accuracy)

  • 심현보;윤홍일;윤이나
    • 대한정형도수물리치료학회지
    • /
    • 제13권2호
    • /
    • pp.31-44
    • /
    • 2007
  • The purposes of this study were to examine the normal lumbar proprioception and identify the effect of vision and proprioception on lumbar movement accuracy through measuring a reposition error in visual and non-visual conditions and to provide the basic data for use of vision when rehabilitation program is applied. The subjects of this study were 39 healthy university students who have average physical activity level. They were measured the ability to reproduce the target position(50% of maximal range of motion) of flexion, extension, dominant and non-dominant side flexion in visual and non-visual conditions. Movement accuracy was assessed by reposition error(differences between intended and actual positions) that is calculated by the average of absolute value of 3 repeated measures at each directions. The data were analysed by paired samples t-test, independent samples t-test, and repeated measures ANOVA. The results were as follows : 1. Movement accuracy of flexion, extension, dominant side flexion, and non-dominant side flexion was increased in visual condition. 2. There were no differences in the lumbar movement accuracy between sexes in visual and non-visual conditions. 3. In non-visual condition, the movement in coronal plane(dominant and non dominant side flexion) is more accurate than that in sagittal plane(flexion and extension). 4. In non-visual condition, there were no differences in the lumbar movement accuracy between dominant and non-dominant side flexion. In conclusion, this study demonstrates that the movement is more accurate when the visual information input is available than proprioception is only available. When proprioception is decreased by injury or disease, it disturbs the control of posture and movement. In this case, human controls the posture and movement by using visual compensation. However it is impossible to prevent an injury or trauma because most of injuries occur in an unexpected situation. For this reason, it is important to improve the proprioception. Therefore, proprioceptive training or exercise which improve the ability to control of posture and movement is performed an appropriate control of permission or interception of the visual information input to prevent an excessive visual compensation.

  • PDF

모세관 전기영동 분석에서 계면 동전기 주입에 미치는 공존 이온의 영향 (Effect of Coexisting Ions on Electrokinetic Injection in Capillary Electrophoresis Analysis)

  • 이광우;전지영;이광필
    • 분석과학
    • /
    • 제9권1호
    • /
    • pp.35-42
    • /
    • 1996
  • 원자력 발전소의 배관 부식 등의 방지를 위하여 초순수에 첨가되는 고순도 시약 중의 미량 음이온 성분올 모세관 전기영동법에 의하여 정량하는 분석법을 개발하였다. 전해질은 5mM 크롬산염(pH=8.0)을, 캐필러리는 내경이 50 또는 $75{\mu}m$인 석영 캐필러리 내부를 염화 삼메틸 실란으로 처리하여 사용하였다. 기타 기기 조건은 전압 20kV, 검출은 254nm에서 간접 자외흡수법을 사용하였고 주요 정량 성분은 $Cl^-$, $NO{_3}^-$, $SO{_4}^{2-}$, $N{_3}^-$, $PO{_4}^{3-}$등이며, 시료 주입은 시료 농도가 1ppm 이상일 때는 유체역학적 주입법으로, 1ppm 이하는 계면 동전기 주입법을 적용하였다. 특히 본 연구에서는 시료 주입시 공존 이온의 영향을 조사한 결과 유체역학적으로 시료를 주입할 때는 시료 내 공존하는 음이온의 영향이 크게 없었으나, 계면 동전기적인 시료 주입시에는 공존하는 이온량과 전기영동적 이동도에 따라 분석 이온의 신호 크기가 크게 변함을 확인하였으며, 각 분석 성분 주입량, 즉 신호 크기는 시료 용액의 저항에 비례하였다. 따라서, 분석 이온보다 과량의 공존 이온 존재하에 계면 동전기 주입법으로 분석할 경우 시료 용액과 표준 용액의 전기 전도도 차이를 보상할 수 있는 표준물 첨가법 또는 내부 표준물법 등의 적절한 방법을 반드시 사용해야 한다.

  • PDF

초산균에 의한 환경친화적 기능성소재인 세균 셀룰로오스 생산을 위한 정치배양조건 최적화 (Static Culture Condition for Production of Bacterial Cellulose, Environment-Friendly Functional Material, by Acetic Acid Bacteria)

  • 조광식;이상미;정성윤;박근태;이희섭;황대연;정영진;손홍주
    • 한국환경과학회지
    • /
    • 제23권5호
    • /
    • pp.895-902
    • /
    • 2014
  • Bacterial cellulose (BC) has played important role as new functional material for food industry and industrial products based on its unique properties. The interest in BC from static cultures has increased steadily in recent years because of its potential for use in medicine and cosmetics. In this study, we investigated culture condition for BC production by Acetobacter sp. F15 in static culture. The strain F15, which was isolated from decayed fruit, was selected on the basis of BC thickness. The optimal medium compositions for BC production were glucose 7%, soytone 12%, $K_2HPO_4$ 0.2%, $NaH_2PO_4{\cdot}_2H_2O$ 0.2%, lactic acid 0.05% and ethanol 0.3%, respectively. The strain F15 was able to produce BC at $26^{\circ}C-36^{\circ}C$ with a maximum at $32^{\circ}C$. BC production occurred at pH 4.5-8 with a maximum at pH 6.5. Under these conditions, a maximum BC thickness of 12.15 mm was achieved after 9 days of cultivation; this value was about 2.3-fold higher than the thickness in basic medium. Scanning electron micrographs showed that BC from the optimal medium was more compact than plant cellulose and was reticulated structure consisting of ultrafine cellulose fibrils. BC from the optimal medium was found to be of cellulose type I, the same as typical native cellulose.

전기응집 분리 막 생물반응기의 막 오염 저감 (Membrane fouling reduction using electro-coagulation aided membrane bio-reactor)

  • 김완규;홍성준;장인성
    • 한국산학기술학회논문지
    • /
    • 제19권8호
    • /
    • pp.105-114
    • /
    • 2018
  • 전기응집 (Electro-coagulation)을 활용한 분리 막 생물반응기 (Membrane Bio-Reactor) 공정의 막 오염 저감 현상을 확인하고 이를 해석하고자 하였다. 전기응집의 주요 운전 인자인 전류밀도와 접촉시간 변화가 활성슬러지 혼합액의 막 여과에 미치는 영향을 관찰하고 전기응집 과정에서 발생하는 수산화금속염이 막 오염에 미치는 역할에 대해 연구하였다. 전류밀도를 $10A/m^2$으로 높게 유지한 경우에는 전기응집 시간이 증가하여도 막 오염 감소 효과가 크지 않은 반면 $2.5A/m^2$의 낮은 전류밀도 하에서는 전기응집 시간이 증가하면 추가적인 막 오염 감소가 관찰되었다. 즉, 막 오염을 감소시키는 전류밀도와 접촉시간의 곱이 전체 막 오염 저감 정도를 지배하고 있음을 확인하였다. 또한 주어진 전류밀도와 인가시간에서 입도분포는 크게 변화하지 않은 것으로 나타나 콜로이드 입자와 막 오염 저감과는 큰 관련성이 없는 것으로 판단되었다. 그러나 전기응집을 통해 생성된 수산화알루미늄 (인산알루미늄)이 막 여과 과정에서 동적 막 (Dynamic Membrane)을 형성하여 막 오염 현상을 완화하는 것으로 확인되었다. 전기응집에서 발생한 수산화금속염이 막 표면에 동적 막을 형성하고 이로 인해 유입수의 입자성분이 직접 막 표면과 내부에 침적되는 것을 방해하고 동적 막에 주로 쌓이게 함으로써 막 오염이 감소된 것이다. 본 연구에서 밝힌 수산화금속염에 의한 동적 막의 역할은 전기응집을 활용한 MBR 공정의 후 막 오염 감소 메커니즘을 해석하는데 중요한 역할을 한다고 결론지을 수 있다.

Synthesis and Micellar Characterization of CBABC Type PLGA-PEO-PPO-PEO-PLGA Pentablock Copolymers

  • Seong, Haseob;Cho, Eun-Bum;Oh, Joongseok;Chang, Taihyun
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권8호
    • /
    • pp.2342-2348
    • /
    • 2014
  • Poly(lactic-co-glycolic acid) (PLGA) were grafted to both ends of Pluronic$^{(R)}$ F68 ($(EO)_{75}(PO)_{30}(EO)_{75}$) triblock copolymer to produce poly{(lactic acid)$_m$-co-(glycolic acid)$_n$}-b-poly(ethylene oxide)$_{75}$-b-poly(propylene oxide)$_{30}$-b-poly(ethylene oxide)$_{75}$-b-poly{(lactic acid)$_m$-co-(glycolic acid)$_n$} (PLGA-F68-PLGA) pentablock copolymers. Molecular weights of PLGA blocks were controlled and five kinds of pentablock copolymers with different PLGA block lengths were synthesized using in-situ ring-opening polymerization of D,L-lactide and glycolide with tin(II) 2-ethylhexanoate ($Sn(Oct)_2$) catalyst. PLGA-F68-PLGA pentablock copolymers were characterized by $^1H$- and $^{13}C$-NMR, GPC, and TGA. The numbers (2m, 2n) of repeating units for lactic acid and glycolic acid inside PLGA segments were obtained as (48, 17), (90, 23), (125, 40), (180, 59), and (246, 64), with $^1H$-NMR measurement. From NMR data, the resultant molecular weights were determined in the range of 12,700-29,700, which were similar to those obtained from GPC. Polydispersity index was increased in the range of 1.32-1.91 as the content of PLGA blocks increased. TG and DTG thermograms showed discrete degradation traces for PLGA and F68 blocks, which indicate the weight fractions of PLGA blocks in pentablock copolymers can be calculated by TG profile and it is possible to remove PLGA block selectively. Hydrodynamic radius and radius of gyration of pentablock copolymer micelle were obtained in the range of 46-68 nm and 31-49 nm, respectively, in very dilute (i.e. 0.005 wt %) aqueous solution of THF:$H_2O$ = 10:90 by volume at $25^{\circ}C$.

4-Chlorobiphenyl 분해 세균에서 cbp 유전자군의 상이성 (Divergence of the cbp Genes in 4-Chlorobiphenyl Catabolizing Bacteria)

  • 윤덕중;한재진;김치경;김영수
    • 미생물학회지
    • /
    • 제30권1호
    • /
    • pp.53-59
    • /
    • 1992
  • 자연계로부터 4-chlorobiphenyl (4CB) 을 분해하는 P08, P20, 027 그리고 P1242 균주를 불리하였다. 이들 분해 균주들의 4CB 분해 과정을 UV-spectrophotometry 방법으로 분석한 결과, 4-CB 로 부터 2-hydroxy-6-oxo-6-(4'-chlorophenyl)hexa-2, 4-dienoic acid 와 4-chlorobenzoate(4CBA) 가 생성되었다. 따라서 분해균주들은 공통적으로 meta-cleavage pathway에 의하여 4CB 를 분해하는 것으로 확인되었다. 그러나 DJ-12, P08 그리고 P27 균주는 4CBA 를 계속 분해하여 4-hydroxybenzoate 를 생성하였으나, P20 과 P1242 균주들은 4CBA 를 더이상 분해하지 못 하였다. 각 분해 균주에서 cbp 유전자군의 상동성을 분석하기 위하여 P. pseudoalcaligenes KF707 의 bphABC 유전자군을 DNA probe 로 이용하여 Southern hybridization 을 실시한 결과, DJ-12, P08 그리고 P27 균주들은 XhoI 에 의한 2.2kb 와 1.8 kb, 그리고 EcoRI 에 의한 11 kb 의 genomic DNA 의 절편에서 hybridization 이 일어났다. 따라서 본 연구에서 분리한 4CB 분해 균주들의 cbp 유전자군은 분해경로 및 bph 유전자군과의 상동성에 의거하여 부 group 으로 구분되었다.

  • PDF

Phytoextraction of Heavy Metals Induced by Bioaugmentation of a Phosphate Solubilizing Bacterium

  • Arunakumara, K.K.I.U.;Walpola, Buddhi Charana;Song, Jun-Seob;Shin, Min-Jung;Lee, Chan-Jung;Yoon, Min-Ho
    • 한국환경농학회지
    • /
    • 제33권3호
    • /
    • pp.220-230
    • /
    • 2014
  • BACKGROUND: Excessive metals in the soil have become one of the most significant environmental problems. Phytoremediation has received considerable attention as a method for restoring the contaminated soils. The microbes having remarkable metal tolerance and plant growth-promoting abilities could also play a significant role in remediation of metal-contaminated soils, because bioaugmentation with such microbes could promote phytoextraction of metals. Therefore, the present study was focused on evaluating the phytoextraction of heavy metals (Co, Pb and Zn) in Helianthus annuus (sunflower) induced by bioaugmentation of a phosphate solubilizing bacterium. METHODS AND RESULTS: A phosphate solubilizing bacterium was isolated from metal-contaminated soils based on the greater halo size (>3 mm) with solid NBRIP agar medium containing 10 g glucose, 5 g $Ca_3(PO_4)_2$, 5 g $MgCl_2{\cdot}6H_2O$, 0.25 g $MgSO_4.7H_2O$, 0.2 g KCl, 0.1 g $(NH_4)_2SO_4$ in 1 L distilled water. Isolated bacterial strain was assessed for their resistance to heavy metals; $CoCl_2.6H_2O$, $2PbCO_3.Pb(OH)_2$, and $ZnCl_2$ at various concentrations ranging from $100-400{\mu}g/mL$ (Co, Pb and Zn) using the agar dilution method. A pot experiment was conducted with aqueous solutions of different heavy metals (Co, Pb and Zn) to assess the effect of bacterial strain on growth and metal uptake by Helianthus annuus (sunflower). The impact of bacterial inoculation on the mobility of metals in soil was investigated under laboratory conditions with 50 mL scaled polypropylene centrifuge tubes. The metal contents in the filtrate of plant extracts were determined using an atomic absorption spectrophotometer (Perkinelmer, Aanalyst 800, USA). CONCLUSION: Inoculation with Enterobacter ludwigii PSB 28 resulted in increased shoot and root biomass and enhanced accumulation of Co, Pb and Zn in Helianthus annuus plants. The strain was found to be capable of promoting metal translocation from the roots to the shoots of H. annuus. Therefore, Enterobacter ludwigii PSB 28 could be identified as an effective promoter of phytoextraction of Co, Pb and Zn from metal-contaminated soils.

Copper Interconnection and Flip Chip Packaging Laboratory Activity for Microelectronics Manufacturing Engineers

  • Moon, Dae-Ho;Ha, Tae-Min;Kim, Boom-Soo;Han, Seung-Soo;Hong, Sang-Jeen
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.431-432
    • /
    • 2012
  • In the era of 20 nm scaled semiconductor volume manufacturing, Microelectronics Manufacturing Engineering Education is presented in this paper. The purpose of microelectronic engineering education is to educate engineers to work in the semiconductor industry; it is therefore should be considered even before than technology development. Three Microelectronics Manufacturing Engineering related courses are introduced, and how undergraduate students acquired hands-on experience on Microelectronics fabrication and manufacturing. Conventionally employed wire bonding was recognized as not only an additional parasitic source in high-frequency mobile applications due to the increased inductance caused from the wiring loop, but also a huddle for minimizing IC packaging footprint. To alleviate the concerns, chip bumping technologies such as flip chip bumping and pillar bumping have been suggested as promising chip assembly methods to provide high-density interconnects and lower signal propagation delay [1,2]. Aluminum as metal interconnecting material over the decades in integrated circuits (ICs) manufacturing has been rapidly replaced with copper in majority IC products. A single copper metal layer with various test patterns of lines and vias and $400{\mu}m$ by $400{\mu}m$ interconnected pads are formed. Mask M1 allows metal interconnection patterns on 4" wafers with AZ1512 positive tone photoresist, and Cu/TiN/Ti layers are wet etched in two steps. We employed WPR, a thick patternable negative photoresist, manufactured by JSR Corp., which is specifically developed as dielectric material for multi- chip packaging (MCP) and package-on-package (PoP). Spin-coating at 1,000 rpm, i-line UV exposure, and 1 hour curing at $110^{\circ}C$ allows about $25{\mu}m$ thick passivation layer before performing wafer level soldering. Conventional Si3N4 passivation between Cu and WPR layer using plasma CVD can be an optional. To practice the board level flip chip assembly, individual students draw their own fan-outs of 40 rectangle pads using Eagle CAD, a free PCB artwork EDA. Individuals then transfer the test circuitry on a blank CCFL board followed by Cu etching and solder mask processes. Negative dry film resist (DFR), Accimage$^{(R)}$, manufactured by Kolon Industries, Inc., was used for solder resist for ball grid array (BGA). We demonstrated how Microelectronics Manufacturing Engineering education has been performed by presenting brief intermediate by-product from undergraduate and graduate students. Microelectronics Manufacturing Engineering, once again, is to educating engineers to actively work in the area of semiconductor manufacturing. Through one semester senior level hands-on laboratory course, participating students will have clearer understanding on microelectronics manufacturing and realized the importance of manufacturing yield in practice.

  • PDF

공항 특수경비원들의 직무자원이 직무태도 및 이직의도에 미치는 영향 (The Effect of Business Resource of the Members in Airport Special Guard's firms on the Business Attitude and Turnover Intention)

  • 김진환
    • 융합보안논문지
    • /
    • 제17권1호
    • /
    • pp.89-100
    • /
    • 2017
  • 이 연구는 공항 특수경비원들의 직무자원이 직무태도 및 이직의도에 미치는 영향을 분석하는데 있다. 연구의 분석을 위하여 인천과 김포, 청주, 대구지역 공항을 중심으로 4곳의 공항 특수경비원을 모집단으로 설정하였으며, 설문지는 비확률 표본 추출법 중 유의표집법을 통하여 300명을 대상으로 배포하였다. 조사기간은 2016년 7월부터 10월까지 약 4개월간에 걸쳐서 실시하였으며, 설문지는 회수되지 않거나 극단치가 있는 40부를 제외한 총 260부를 최종 데이터로 활용하였다. 데이터 분석을 위하여 이 연구에서는 SPSS 18.0 통계패키지를 활용하였으며, 영향 관계는 다중회귀분석을 통하여 가설을 검증 하였다. 분석결과, 직무자원은 직무태도에 통계적으로 p<.01 수준에서 정(+)의 영향을 미치는 것으로 나타나 가설이 채택되었다. 그리고 직무자원은 이직의도에 통계적으로 p<.001 수준에서 정(+)의 영향을 미치는 것으로 나타나 가설이 채택되었으며, 직무태도도 이직의도에 통계적으로 p<.01 수준에서 정(+)의 영향을 미치는 것으로 나타나 가설이 채택되었다. 또한, 직무태도는 직무자원과 이직의도 간의 관계에서 통계적으로 p<.05 수준에서 정(+)의 영향을 미치는 것으로 나타나 매개역할을 할 것이라는 가설은 채택되었다. 이러한 연구결과를 통하여 공항 특수경비원들의 직무자원과 직무태도 및 이직의도 간의 관계에서 직무자원은 중요한 변수로 작용한다는 것으로 나타났다.