• Journal of Forest and Environmental Science
• /
• v.29 no.1
• /
• pp.1-14
• /
• 2013

Acacia mangium is an evergreen fast-growing tropical tree, which can grow up to 30 m tall and 50 cm thick, under favorable conditions. It is a low-elevation species associated with rain forest margins and disturbed, well-drained acid soils. It is native to Papua, Western Irian Jaya and the Maluku islands in Indonesia, Papua New Guinea and north-eastern Queensland in Australia. Due to its rapid growth and tolerance of very poor soils, A. mangium was introduced into some Asian, African and western hemisphere countries where it is used as a plantation tree. A. mangium has good quality wood traits, such as a comparatively low proportion of parenchymatous cells and vessels, white and hard wood, and high calorific value. Therefore, it is useful for a variety of purposes, such as furniture, cabinets, turnery, floors, particleboard, plywood, veneer, fence posts, firewood, and charcoal. It is also being used in pulp and paper making because it has good pulp traits, with high yields of pulp, quality of kraft, and produces paper with good optical, physical and surface properties. Because there are significant provenance differences in growth rate, stem straightness, heartwood formation and frequency of multiple leaders, the productivity and quality also varies depending upon environmental conditions, so genetic improvement programmes have been undertaken in countries like Australia, India, Indonesia, Malaysia, the Philippines, Taiwan and Thailand. The programme includes provenance identifications and testing, plus tree selection and clonal multiplication, establishment of seed orchards and hybridization. The phenology, reproductive biology, fruit characteristics, silvicultural practices for cultivation, pest and diseases problems, production of improved planting stock, harvesting, wood properties and utilization have been discussed in this paper.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.4
• /
• pp.409-418
• /
• 2017

This work attempted to manufacture glued-laminated timber (Glulam) bonded with melamine-urea-formaldehyde (MUF) resin adhesives at various melamine contents from 20% to 50% under high frequency (HF) heating for a very short time. Two preparation methods were employed to prepare MUF resin adhesives with different melamine contents: one-batch method of synthesizing MUF resins in a single batch, and two-batch method of mixing urea-formaldehyde (UF) resin with melamine-formaldehyde (MF) resin that had been synthesized separately. As the melamine content increased, the gelation time and peak temperature of MUF resins decreased. The adhesion performance of plywood showed that the one-batch MUF resin adhesive with 50% melamine content only satisfied the standard requirement of water resistance. Thus, the one-batch MUF resin adhesive with 50% melamine content was applied for bonding wood lamina from four softwood species such as Japanese larch, Korean red pine, Korean pine and Japanese cedar to manufacture Glulam under HF heating. All Glulam samples bonded with the one-batch MUF resin adhesives with 50% melamine content except those from Korean Red Pine satisfied the requirement in water soaking or boiling water delamination test as an exterior grade Glulam. The presence of rosin in Korean Red Pine was believed to be responsible for its poor adhesion. These results showed that the one-batch MUF resin adhesives with 50% melamine content provided acceptable water resistance with exterior grade Glulam manufactured under HF heating.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.2
• /
• pp.202-210
• /
• 2018

This study was carried out to quantify degree of contribution of harvested wood product (HWP) on mitigation of climate change by valuation of public benefits, environmentally and economically. The potential carbon dioxide emission reduction of HWP was estimated by accounting carbon storage effect and substitution effect. Based on 2014 statistics of Korea Forest Service, domestic HWPs were sorted by two categories, such as wood products produced domestically from domestic and imported roundwood. The wood products were divided into seven items; sawnwood, plywood, particle board, fiberboard (MDF), paper (including pulp), biomass (wood pellet) and other products. The carbon stock of wood products and substitution effects during manufacturing process was evaluated by items. Based on the relevant carbon emission factor and life cycle analysis, the amount of carbon dioxide emission per unit volume on HWP was quantified. The amounts of carbon stock of HWP produced from domestic and from imported roundwood were 3.8 million $tCO_{2eq}$., and 2.6 million $tCO_{2eq}$., respectively. Also, each reduction of carbon emission by substitution effect of HWP produced from domestic and imported roundwood was 3.1 million $tCO_{2eq}$. and 2.1 million $tCO_{2eq}$., respectively. The results of this study, the amount of carbon emission reduction of HWP, can be effectively used as a basic data for promotion of wood utilization to revise and establish new wood utilization promotion policy such as 'forest carbon offset scheme', and 'carbon storage labeling system of HWP'.

• Journal of the Korean Home Economics Association
• /
• v.11 no.4
• /
• pp.424-435
• /
• 1973

This paper attempts to find out the development of designs of chairs in interiors. It will discussed by dividing into two periods; the pre-world war I, and the post-world war I up to date. In the first part it will concentrate on four types of design materjals; plywood, metal, solid wood, and plastic chairs. In the second part it will deal with only two materials; Metal and solid wood. Under each material one designer and manufacturer, the country where the designer worked, and related dates. It will discuss how the design materiai was exploited by each designer within its potentials including how chair was made, what design elements could do, whether he used the potentials, and the potentials were fully exploited. And it discusses the success of the chair design material as shown in the interiors or failure of the chair design material. Fainally under each material one picture of chairs, one or two pictures for the chairs in the interiors, of the chairs will be provided. A bibliography will be attached to the end of the paper.

• Fire Science and Engineering
• /
• v.29 no.4
• /
• pp.67-72
• /
• 2015

A series of fire tests was conducted to examine the fire characteristics of flaming and smoldering combustion of engineered wood products, which have been widely used for furniture and finishing materials in buildings. The engineered wood products of MDF, plywood, and chipboard were ignited by a radiant cone heater with incident heat flux of $50kW/m^2$. During the fire test, key parameters representing the fire characteristics such as the heat release rate, yield rate of combustion product, and effective heat of combustion were quantified in terms of thickness. The tests show two peak points of HRRPUA due to lateral fire propagation in the initial stage, followed by later fire penetration through the specimen thickness. The mass loss rate of flaming combustion was 5 times higher than that of smoldering combustion, while the CO yield rate of smoldering combustion was 10 times higher than that of flaming combustion. This study can contribute to the understanding of fire behavior of wood combustibles and provide useful data for fire analysis.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.578-585
• /
• 2000

Geometrical characteristics of fresh red pepper(Capsicum annuum L.) were measured and indexed to define some important geometrical characteristics, and malformation of body and fruit stalk which are necessary for the design of the equipments for cutting, spreading and alignment of red pepper in developing a fruit stalk remover of fresh red pepper. The effects of bending of body and fruit stalk on the equipments of cutting, spreading and alignment were studied. The maximum lengths of some parts of fresh red pepper were found to be 180 mm, 125 mm, 144 mm, 67 mm and 76 mm for the body, the bent part of body, the fruit stalk, the bent part and the straight part of fruit stalk, respectively. The fresh red pepper with bending indices more than 0.4 and 0.3 for the body and the fruit stalk, respectively, was defined to be malformed based on the result of cutting rate using cutting unit; while the other ones to be normal in shape. Based on this, among the total fresh red peppers tested, 47%, 40% and 20% were found malformed for the body, the fruit stalk, and for both of the body and the fruit stalk. Malformed red peppers were poorer in spreading and alignment than normal ones, and the processed quantity was decreased with increased feed rate. The required time for the malformed peppers to pass on the alignment plate inclined at 30 increased rapidly at 8.3 Hz with increased feed rate. For the fresh red peppers with average moisture content of 85%,w.b., the maximum tensile strength between fruit stalk and body was 88.1 N; the maximum cutting resistances were 92.1 N and 94.9 N for the fruit stalk-calyx joint and body, respectively. Average coefficients of static friction were 0.99, 0.62, 0.59 and OJ, respectively, for the surfaces of rubber, galvanized iron, acryl and plywood.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.828-841
• /
• 2016

Relatively little information is available regarding the correlation between wood and veneer quality, especially for Samama wood, an endemic wood species in eastern Indonesia. This study addresses the quality of 8 years old Samama wood and its effect on the veneer quality. Samama wood quality was determined by evaluating its specific gravity, moisture content, fiber dimensions, and microfibril angle from pith toward bark. Meanwhile, veneer quality was assessed by examining veneer thickness and lathe check characteristics. Geometry factor model was constructed to elaborate the quantities of lathe check from pith toward bark. Results show that fair variations of veneer thickness, ranging from 1.5 mm to 3.0 mm, could be obtained from Samama wood. The quantity, depth, and length of lathe check were noticeably decreasing toward bark. Further, in the same manufacturing process, geometry factor was determined as the dominant factor over other wood properties in affecting the frequency of lathe checks from pith towards bark. These facts should be put into consideration in producing veneer from Samama wood. Moreover, these results enlighten the potential of Samama wood as plywood and other excellent veneer-based products.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.6
• /
• pp.517-526
• /
• 2014

The leakage of cryogenic LNG through cracks in the insulation membrane of an LNG carrier causes the hull structure to experience a cold spot as a result of the heat transfer from the LNG. The hull structure will become brittle at this cold spot and the evaporated natural gas may potentially lead to a hazard because of its flammability. This paper presents a computational model for the LNG flow and heat diffusion in an LNG insulation panel subject to leakage. The temperature distribution in the insulation panel and the speed of gas diffusion through it are simulated to assess the safety level of an LNG carrier subject that experiences a leak. The behavior of the leaked LNG is modeled using a multiphase flow that considers the mixture of liquid and gas. The simulation model considers the phase change of the LNG, gas-liquid multiphase interactions in the porous media, and accompanying rates of heat transfer. It is assumed that the NO96-GW membrane storage is composed of glass wool and plywood for the numerical simulation. In the numerical simulation, the seepage, heat diffusion, and evaporation of the LNG are investigated. It is found that the diffusion speed of the leakage is very high to accelerate the evaporation of the LNG.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.136-153
• /
• 2020

In this paper, the influence of initial formaldehyde/urea (F/U) molar ratios on the performance of low molar ratio (1.0) urea-formaldehyde (UF) resin adhesives has been investigated. Two initial F/U molar ratios, i.e., the first and second initial molar ratios were used for the alkaline addition reaction. Three levels of the first initial F/U molar ratios (2.0, 3.0, and 4.0) and two levels of the second initial molar ratios (2.0 and 1.7) were employed to prepare a total of six UF resins with an identical final molar ratio (1.0). The basis properties, functional groups, molecular weight, crystallinity, and thermal curing properties of the UF resins were characterized in detail. Higher levels (3.0 and 4.0) of the first initial F/U molar ratio provided the UF resins with better properties (non-volatile solids content, viscosity, gelation time, pH, and specific gravity) than those of the resins prepared with the conventional level F/U molar ratio of 2.0. Statistical analysis suggested that combining the first and second initial molar ratio of 4.0 with 1.7 would result in UF resins with greater adhesion strength and lower formaldehyde emission than those of the resins prepared with other molar ratios. The results showed that higher levels of the first initial molar ratio resulted in a more branched structure, as indicated by GPC, FTIR, DSC, XRD, and greater adhesion strength than those of the other UF resins with an identical final molar ratio of 1.0.

• Korean Institute of Interior Design Journal
• /
• no.13
• /
• pp.187-196
• /
• 1997

A Study on the Characteristics of the Modern Chair Design The features of the modern chair design results from the diverse life style unfolded as per the 20th century social structure and the change of the residential space, and new design has been being developed by the scientists and the artists in various fields through their cooperated work in a way. The field of the scientific or technical study and creation of arts can be developed where they can evoke the sympathy in the circumstances under which the various styles of both arts and science meet across, complement crash together, and grow up. The operation which can control in the network of such pluralistic sphere has been needed for a long period and it has been facing the needs from a time and society. The engineering furniture as the counterplan of the above has brought the value of materials into relief to the forms of human life by making the properties of matter the maximum value or changing it. It can be summarized as following characteristics in its materials and forms along as well as the 3 types (handycrafty, mechanical, and ecological expression) in process through the 20th century. 1. Characteristics in Materials elasticity of the chair as per the changes of the flexibility in the steel pipe development of systematic chair using the plasticity of the plywood, plastic, and wire lightweight due to the materials such as aluminum. 2. Formative characteristics formative simplicity for the increase of the function and the quality improvement such as sociality, productivity, environmental and aesthetic nature emphasis on the structure as per the architectural environment and tecniques pursuit of the forms as a container of the human body seeking for the formative values as the cultural symbols coping with the needs from thepluralistic social structure Furniture is not the makeup for convenience sake but most importantexpression as necessaries of our environments. It should identify itself always as per these kind of needs and also it should be able to used to keep the relation of such mutual division, otherwise the purchase of new furniture should be necessary according to every change of the existing situatiov. Our residence doesn't need the specific style but expresses only the properties of the dwellers.