• Journal of Forest and Environmental Science
• /
• 제29권1호
• /
• pp.1-14
• /
• 2013

Acacia mangium is an evergreen fast-growing tropical tree, which can grow up to 30 m tall and 50 cm thick, under favorable conditions. It is a low-elevation species associated with rain forest margins and disturbed, well-drained acid soils. It is native to Papua, Western Irian Jaya and the Maluku islands in Indonesia, Papua New Guinea and north-eastern Queensland in Australia. Due to its rapid growth and tolerance of very poor soils, A. mangium was introduced into some Asian, African and western hemisphere countries where it is used as a plantation tree. A. mangium has good quality wood traits, such as a comparatively low proportion of parenchymatous cells and vessels, white and hard wood, and high calorific value. Therefore, it is useful for a variety of purposes, such as furniture, cabinets, turnery, floors, particleboard, plywood, veneer, fence posts, firewood, and charcoal. It is also being used in pulp and paper making because it has good pulp traits, with high yields of pulp, quality of kraft, and produces paper with good optical, physical and surface properties. Because there are significant provenance differences in growth rate, stem straightness, heartwood formation and frequency of multiple leaders, the productivity and quality also varies depending upon environmental conditions, so genetic improvement programmes have been undertaken in countries like Australia, India, Indonesia, Malaysia, the Philippines, Taiwan and Thailand. The programme includes provenance identifications and testing, plus tree selection and clonal multiplication, establishment of seed orchards and hybridization. The phenology, reproductive biology, fruit characteristics, silvicultural practices for cultivation, pest and diseases problems, production of improved planting stock, harvesting, wood properties and utilization have been discussed in this paper.

• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.409-418
• /
• 2017

This work attempted to manufacture glued-laminated timber (Glulam) bonded with melamine-urea-formaldehyde (MUF) resin adhesives at various melamine contents from 20% to 50% under high frequency (HF) heating for a very short time. Two preparation methods were employed to prepare MUF resin adhesives with different melamine contents: one-batch method of synthesizing MUF resins in a single batch, and two-batch method of mixing urea-formaldehyde (UF) resin with melamine-formaldehyde (MF) resin that had been synthesized separately. As the melamine content increased, the gelation time and peak temperature of MUF resins decreased. The adhesion performance of plywood showed that the one-batch MUF resin adhesive with 50% melamine content only satisfied the standard requirement of water resistance. Thus, the one-batch MUF resin adhesive with 50% melamine content was applied for bonding wood lamina from four softwood species such as Japanese larch, Korean red pine, Korean pine and Japanese cedar to manufacture Glulam under HF heating. All Glulam samples bonded with the one-batch MUF resin adhesives with 50% melamine content except those from Korean Red Pine satisfied the requirement in water soaking or boiling water delamination test as an exterior grade Glulam. The presence of rosin in Korean Red Pine was believed to be responsible for its poor adhesion. These results showed that the one-batch MUF resin adhesives with 50% melamine content provided acceptable water resistance with exterior grade Glulam manufactured under HF heating.

• Journal of the Korean Wood Science and Technology
• /
• 제46권2호
• /
• pp.202-210
• /
• 2018

This study was carried out to quantify degree of contribution of harvested wood product (HWP) on mitigation of climate change by valuation of public benefits, environmentally and economically. The potential carbon dioxide emission reduction of HWP was estimated by accounting carbon storage effect and substitution effect. Based on 2014 statistics of Korea Forest Service, domestic HWPs were sorted by two categories, such as wood products produced domestically from domestic and imported roundwood. The wood products were divided into seven items; sawnwood, plywood, particle board, fiberboard (MDF), paper (including pulp), biomass (wood pellet) and other products. The carbon stock of wood products and substitution effects during manufacturing process was evaluated by items. Based on the relevant carbon emission factor and life cycle analysis, the amount of carbon dioxide emission per unit volume on HWP was quantified. The amounts of carbon stock of HWP produced from domestic and from imported roundwood were 3.8 million $tCO_{2eq}$., and 2.6 million $tCO_{2eq}$., respectively. Also, each reduction of carbon emission by substitution effect of HWP produced from domestic and imported roundwood was 3.1 million $tCO_{2eq}$. and 2.1 million $tCO_{2eq}$., respectively. The results of this study, the amount of carbon emission reduction of HWP, can be effectively used as a basic data for promotion of wood utilization to revise and establish new wood utilization promotion policy such as 'forest carbon offset scheme', and 'carbon storage labeling system of HWP'.

• 대한가정학회지
• /
• 제11권4호
• /
• pp.424-435
• /
• 1973

이 연구의 목적은 건물내부에 있어서의 의자(chairs in interiors)의 design의 발달을 명백히 하는데에 있다. 연구의 방법은 제1차세계대전이전부터 현재에 이르기까지의 의자의 Design을 사용된 재료의 종류 즉 금속, 통목재, 합판, 플라스틱 등을 중심으로 개개의 Designer, 그가 속한 나라와 제작된 시기에 따라서 비교 검사하였다. 결과로서 인간이 디자인한 의자는 오랜 세월을 두고 건의 식과 재료 및 기술(Skills & Technology)에 따라서 변천해 왔으며 제1차세계대전을 전후하여 그 특성이 많은 차이를 보이고 있다는 것을 알수가 있었다. 제1차세계대전의 의자는 그 디자인이 구식건축의 내부와 같이 하고 의자자체의 미에 더욱 치중한 디자인이 많고, 대전이후의 그것은 현대건축내부(Interior)에 대한 고려가 깊으며 건축내부와 조화되어 있고 새로운 재료가 가진 Design의 가능성을 충분히 살려서 새로운 건축내부의 선에 조화된 전선하고도 민감한 (Simple & Sensitive according to the interiors) 특성을 가진 선으로 이루어지고 있다는 것을 알 수 있다.

• 한국화재소방학회논문지
• /
• 제29권4호
• /
• pp.67-72
• /
• 2015

본 연구는 콘칼로리미터 실험을 통해 건축물 마감재와 가구소재로 널리 적용되는 목재 가공품의 화염연소와 훈소시 화재특성을 파악하고자 한다. 시험대상 목재 가연물은 MDF, 합판, 칩보드이며 $50kW/m^2$의 복사열유속을 시편에 가하여 점화를 유도하였다. 실험과정에서 화재특성을 나타내는 발열량, 연소가스 생성율, 유효연소율 등의 주요 인자를 가연물의 두께에 따라 정량화하였다. 실험결과 초기 평면방향의 화염전파와 후기 시편의 관통에 의한 화재확대로 인해 단위면적당 발열량에 대한 두 개의 피크점이 관측되었다. 화염연소시의 질량감소율이 훈소시에 비해 5배 이상 높게 나타난 반면에 훈소과정에서 CO 생성율은 화염연소에 비해 10배 이상 높게 측정되어 훈소시 높은 독성가스 생성율을 보였다. 본 연구는 목재 가연물의 화재성상을 이해하고 화재해석을 위한 물성자료로 활용될 수 있다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.578-585
• /
• 2000

Geometrical characteristics of fresh red pepper(Capsicum annuum L.) were measured and indexed to define some important geometrical characteristics, and malformation of body and fruit stalk which are necessary for the design of the equipments for cutting, spreading and alignment of red pepper in developing a fruit stalk remover of fresh red pepper. The effects of bending of body and fruit stalk on the equipments of cutting, spreading and alignment were studied. The maximum lengths of some parts of fresh red pepper were found to be 180 mm, 125 mm, 144 mm, 67 mm and 76 mm for the body, the bent part of body, the fruit stalk, the bent part and the straight part of fruit stalk, respectively. The fresh red pepper with bending indices more than 0.4 and 0.3 for the body and the fruit stalk, respectively, was defined to be malformed based on the result of cutting rate using cutting unit; while the other ones to be normal in shape. Based on this, among the total fresh red peppers tested, 47%, 40% and 20% were found malformed for the body, the fruit stalk, and for both of the body and the fruit stalk. Malformed red peppers were poorer in spreading and alignment than normal ones, and the processed quantity was decreased with increased feed rate. The required time for the malformed peppers to pass on the alignment plate inclined at 30 increased rapidly at 8.3 Hz with increased feed rate. For the fresh red peppers with average moisture content of 85%,w.b., the maximum tensile strength between fruit stalk and body was 88.1 N; the maximum cutting resistances were 92.1 N and 94.9 N for the fruit stalk-calyx joint and body, respectively. Average coefficients of static friction were 0.99, 0.62, 0.59 and OJ, respectively, for the surfaces of rubber, galvanized iron, acryl and plywood.

• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.828-841
• /
• 2016

Relatively little information is available regarding the correlation between wood and veneer quality, especially for Samama wood, an endemic wood species in eastern Indonesia. This study addresses the quality of 8 years old Samama wood and its effect on the veneer quality. Samama wood quality was determined by evaluating its specific gravity, moisture content, fiber dimensions, and microfibril angle from pith toward bark. Meanwhile, veneer quality was assessed by examining veneer thickness and lathe check characteristics. Geometry factor model was constructed to elaborate the quantities of lathe check from pith toward bark. Results show that fair variations of veneer thickness, ranging from 1.5 mm to 3.0 mm, could be obtained from Samama wood. The quantity, depth, and length of lathe check were noticeably decreasing toward bark. Further, in the same manufacturing process, geometry factor was determined as the dominant factor over other wood properties in affecting the frequency of lathe checks from pith towards bark. These facts should be put into consideration in producing veneer from Samama wood. Moreover, these results enlighten the potential of Samama wood as plywood and other excellent veneer-based products.

• 한국해양공학회지
• /
• 제28권6호
• /
• pp.517-526
• /
• 2014

The leakage of cryogenic LNG through cracks in the insulation membrane of an LNG carrier causes the hull structure to experience a cold spot as a result of the heat transfer from the LNG. The hull structure will become brittle at this cold spot and the evaporated natural gas may potentially lead to a hazard because of its flammability. This paper presents a computational model for the LNG flow and heat diffusion in an LNG insulation panel subject to leakage. The temperature distribution in the insulation panel and the speed of gas diffusion through it are simulated to assess the safety level of an LNG carrier subject that experiences a leak. The behavior of the leaked LNG is modeled using a multiphase flow that considers the mixture of liquid and gas. The simulation model considers the phase change of the LNG, gas-liquid multiphase interactions in the porous media, and accompanying rates of heat transfer. It is assumed that the NO96-GW membrane storage is composed of glass wool and plywood for the numerical simulation. In the numerical simulation, the seepage, heat diffusion, and evaporation of the LNG are investigated. It is found that the diffusion speed of the leakage is very high to accelerate the evaporation of the LNG.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.136-153
• /
• 2020

In this paper, the influence of initial formaldehyde/urea (F/U) molar ratios on the performance of low molar ratio (1.0) urea-formaldehyde (UF) resin adhesives has been investigated. Two initial F/U molar ratios, i.e., the first and second initial molar ratios were used for the alkaline addition reaction. Three levels of the first initial F/U molar ratios (2.0, 3.0, and 4.0) and two levels of the second initial molar ratios (2.0 and 1.7) were employed to prepare a total of six UF resins with an identical final molar ratio (1.0). The basis properties, functional groups, molecular weight, crystallinity, and thermal curing properties of the UF resins were characterized in detail. Higher levels (3.0 and 4.0) of the first initial F/U molar ratio provided the UF resins with better properties (non-volatile solids content, viscosity, gelation time, pH, and specific gravity) than those of the resins prepared with the conventional level F/U molar ratio of 2.0. Statistical analysis suggested that combining the first and second initial molar ratio of 4.0 with 1.7 would result in UF resins with greater adhesion strength and lower formaldehyde emission than those of the resins prepared with other molar ratios. The results showed that higher levels of the first initial molar ratio resulted in a more branched structure, as indicated by GPC, FTIR, DSC, XRD, and greater adhesion strength than those of the other UF resins with an identical final molar ratio of 1.0.

• 한국실내디자인학회논문집
• /
• 제13호
• /
• pp.187-196
• /
• 1997

A Study on the Characteristics of the Modern Chair Design The features of the modern chair design results from the diverse life style unfolded as per the 20th century social structure and the change of the residential space, and new design has been being developed by the scientists and the artists in various fields through their cooperated work in a way. The field of the scientific or technical study and creation of arts can be developed where they can evoke the sympathy in the circumstances under which the various styles of both arts and science meet across, complement crash together, and grow up. The operation which can control in the network of such pluralistic sphere has been needed for a long period and it has been facing the needs from a time and society. The engineering furniture as the counterplan of the above has brought the value of materials into relief to the forms of human life by making the properties of matter the maximum value or changing it. It can be summarized as following characteristics in its materials and forms along as well as the 3 types (handycrafty, mechanical, and ecological expression) in process through the 20th century. 1. Characteristics in Materials elasticity of the chair as per the changes of the flexibility in the steel pipe development of systematic chair using the plasticity of the plywood, plastic, and wire lightweight due to the materials such as aluminum. 2. Formative characteristics formative simplicity for the increase of the function and the quality improvement such as sociality, productivity, environmental and aesthetic nature emphasis on the structure as per the architectural environment and tecniques pursuit of the forms as a container of the human body seeking for the formative values as the cultural symbols coping with the needs from thepluralistic social structure Furniture is not the makeup for convenience sake but most importantexpression as necessaries of our environments. It should identify itself always as per these kind of needs and also it should be able to used to keep the relation of such mutual division, otherwise the purchase of new furniture should be necessary according to every change of the existing situatiov. Our residence doesn't need the specific style but expresses only the properties of the dwellers.