• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.881-894
• /
• 1999

Cylindrical plunge grinding is widely used for final machining process of precision parts such as automobile, aircraft, measurement units. But in order to make parts which have high precision accuracy and high surface integrity, it is necessary to consider grinding characteristics due to accumulation phenomena of grinding wheel in plunge grinding process. In this study, in order to examine closely plunge grinding process, grinding power, grinding force, real depth of cut are monitored in transient state, steady state and spark out state. As the result, it is shown that grinding power and force are affected by dressing condition, depth of cut and speed ratio and that there exist threshold grinding force and it also affected by dressing condition. Also considered effects of grinding conditions on surface roughness and roundness of workpiece

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.54-59
• /
• 1999

High precision internal plunge grinding is difficult because of the decrease in the quill stiffness due to the small diameter of wheel. In this paper, the characteristics of internal plunge grinding were investigated. Grinding experiments were performed at various grinding conditions with vitrified bonded CBN wheels. The grinding period was assumed to be consisted of rough grinding and fine grinding. The classification of grinding was determined int terms of the normal grinding forces and actual depth of cut. The experimental results indicate that the higher depth of cut and infeed speed result in the longer rough grinding time. The maximum normal grinding force was nearly equal to the static force and it decreases exponentially as the grinding continues.

• 한국정밀공학회지
• /
• 제12권9호
• /
• pp.66-73
• /
• 1995

This paper presents monitoring and control system to decrease non-production time such as air grinding and partial contact in cylindrical plunge grindings. The 4-stage model of the plunge grinding process is proposed according to the state of contact between grinding wheel and workpiece; air grinding, partial contact, entire contact and spark out. Experimentally it is seen that the AE sensor and ultrasonic sensor are very effective to detect the grinding states. Monitoring and control algorithm using recognized grinding process was introduced and a experiment were conducted to verify the developed system.

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.4726-4731
• /
• 2011

본 논문에서는 배치 단위로 이루어지는 플런지연삭의 최적 연삭 조건 선정을 위한 알고리즘을 제안하였다. 제안된 알고리즘은 연삭공정을 나타내는 상태변수를 선정하고 선정된 상태 변수를 바탕으로 각 사이클에서 이루어지는 최적의 연삭 조건을 GA(Genetic Algorithm)를 이용하여 선정하였다. 이를 바탕으로 전체 배치 단위의 최적 연삭조건은 DP(Dynamic Programming)를 이용하여 구하였다. 제안된 알고리즘을 시뮬레이션을 통해 그 가능성을 검증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.417-418
• /
• 2012

• 한국기계가공학회지
• /
• 제15권1호
• /
• pp.68-73
• /
• 2016

In this paper, the grinding characteristics in internal grinding methods(plunge, thrust) were studied with vitreous CBN wheels using machining center. Grinding experiments were performed according to the same material removal rate conditions such as a wheel speed, depth of cut and workpiece speed. And the grinding force, machining error and grinding ratio were investigated though these experiments. Based on the experimental results, the grinding characteristics on internal grinding methods were compared.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1047-1050
• /
• 2002

In this paper, grinding characteristics of cylindrical plunge grinding in 200m/sec of grinding velocity was investigated by use of vitrified CBN wheel. From the experimental result, it was convinced that grinding power is decreased 2.5times and grinding efficiency is heightened 3times more according to increasing wheel velocity 80m/sec to 200m/sec And also, be expected to improvement of surface roughness and roundness by increasing the wheel velocity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 춘계학술대회 논문집
• /
• pp.425-428
• /
• 1994

Non-uniform minute deformation of a cylinderical workpiece resulted from the heat treatment process prior to the grinding makes it diffeclt to control the approaching feedrate of a grinding wheelto a workpiece optimallywithout on-site detection of the grinding states in the plunge grinding. The 4-stage model of the plunge grinding process is proposed according to the state of contact between grinding wheel and workpiece ; precontact, partial contact, entire contact and spark-out. Despite of being scrious to the precision of workpiece finished, the duration of spark-out is determined empirically. The purpose of this research is to develop a monitoring/control system for saving non- production time and setting the optimal spark-out time based on sensor information in the plunge grinding using AE and ultra sonic sensor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.961-964
• /
• 1997

In this paper, grinding characteristics of ultra high speed cylindrical plunge grinding was investigated by use of vitrified CBN wheel. From the experimental result, it was convinced that grinding power is decreased according to the increase of wheel and workpiece speed due to changing of grinding mechanism which decreases depth of cut and length of contact curve according to increment of wheel speed. And also, stock removal reduction of each gram lead to improvement of surface roughness by increasing the wheel speed.

• 한국생산제조학회지
• /
• 제18권5호
• /
• pp.443-448
• /
• 2009

The roughness models have developed to describe the grinding behaviour and predict the final quality of workpiece. The model forms of the plunge grinding process are generally established with initial and steady state model form in accordance with the accumulated metal removal. The steady state roughness model form are based on the grinding condition and specific parameters are used to show the influence of it according to the grinding process such as the equivalent chip thickness and accumulated metal removal. However, the models have been developed in past are not considered the effect of changing the grinding conditions in the same batch. In this paper, the roughness model form to consider the effect of changing grinding condition is proposed and the performance of proposed model is evaluated based on the experimental results.