Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Comparison of Internal Plunge Grinding and Internal Thrust Grinding

내면 플런지 연삭과 스러스트 연삭의 비교

  • Received : 2015.08.17
  • Accepted : 2015.11.24
  • Published : 2016.02.29
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the grinding characteristics in internal grinding methods(plunge, thrust) were studied with vitreous CBN wheels using machining center. Grinding experiments were performed according to the same material removal rate conditions such as a wheel speed, depth of cut and workpiece speed. And the grinding force, machining error and grinding ratio were investigated though these experiments. Based on the experimental results, the grinding characteristics on internal grinding methods were compared.

Keywords

References

  1. Nakagawa, H., Hirogaki, T., Iwasaki, Y., Hayashi, T., Kita, Y. and Kakino, Y., "Study on Oscillation Grinding by Numerical Control with a Machining Center", Journal of the Japan Society for Precision Engineering, Vol. 68, No. 7, pp. 923-927, 2002. https://doi.org/10.2493/jjspe.68.923
  2. Rausch, S., Odendahl, S., Kersting, P., Biermann, D. and Zabel, A., "Simulation-Based Prediction of Process Forces for Grinding Free-Formed Surfaces on Machining Centers", Procedia CIRP, Vol. 4, pp. 161-165, 2012. https://doi.org/10.1016/j.procir.2012.10.029
  3. Choi, H., Seo, C. Y., Park, W. K., and Lee, C. S., "A Study on the Internal Thrust Grinding by Machining Center", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 55-61, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.055
  4. Choi, H., Kim, C. S., Park, W. K., and Lee, C. S., "The Effects on a Side-cut Grinding depend on the Change of the Quill Rigidity", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 5, pp. 36-41, 2013.
  5. Lee, C. S., Kim, C. S., Park, W. K., Lee, J. C. and Choi, H., "A Study on the Side-Cut Grinding using the CBN Wheels", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 98-103, 2012.
  6. Rausch, S. and Biermann, D., "Grinding of Hard-Material-Coated Forming Tools on Machining Centers", Procedia CIRP, Vol. 1, pp. 388-392, 2012. https://doi.org/10.1016/j.procir.2012.04.069

Cited by

  1. CVD-SiC 소재의 가공 특성에 관한 연구 vol.16, pp.5, 2016, https://doi.org/10.14775/ksmpe.2017.16.5.040
  2. 피드스루용 세라믹의 선삭 가공 특성에 관한 연구 vol.19, pp.10, 2016, https://doi.org/10.14775/ksmpe.2020.19.10.081