• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.977-981
• /
• 1997

Because the chatter vibration is a main factor to damage on the quality, The cure is require peticually in cylinderical plunge grinding. The chatter vibration is with wheel speed, workpiece speed and infreed rate. Therefore, in this study, we expressed more credible chatter frequency in accordiance with wheel speed by FFT after accereleration sensing.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.263-267
• /
• 2006

The path of a flapping airfoil during upstroke and down-stroke is optimized for maximum thrust and propulsive efficiency. The periodic flapping motion in combined pitch and plunge is described using Non-Uniform B-Splines(NURBS). A gradient based algorithm is employed for optimization of the NURBS parameters. Unsteady, low speed laminar flows are computed using a Navier-Stokes solver in a parallel computing environment based on domain decomposition. It is shown that the thrust generation is significantly improved in comparison to the sinusoidal flapping motion. For a high thrust generation, the airfoil stays at a high effective angle of attack for short durations.

• 반도체디스플레이기술학회지
• /
• 제1권1호
• /
• pp.29-33
• /
• 2002

In the flip-chip process, the problem like electric defect or fatigue crack caused by the difference of CTE, between chip and substrate board had occurred. Underfill of flip chip to overcome this defects is noticed as important work developing in whole reliability of chip by protecting the chip against the external shock. In this paper, we introduce the underfill methods using mold and plunge and improvement of process and reliability, and the advantage which can be taken from embodiment of device.

• 국제초고층학회논문집
• /
• 제6권4호
• /
• pp.315-322
• /
• 2017

A modern and highly-sustainable addition to the skyline of Seoul, South Korea has been completed; the Federation of Korean Industries Headquarters (FKI). The signature saw-toothed exterior wall of the 245-meter tall tower and the contrasting smooth nature of the pipe-shell structured podium "egg" gives this project and site a unique identity in the city.

• 한국수정란이식학회지
• /
• 제6권1호
• /
• pp.13-24
• /
• 1991

The objective of this experiment was to study some possibilities to simplify freezing, thawing and transfer procedure of one-step straw method comparing with the conventional methods using bovine embryos. The previous work are also designed to investigate the thawing effect by development stage and its quality using the embryos. Results obtained were summarized as follows: 1. A total of 87 embryos from 14 donor cows were frozen-thawed and an average of frozen embryo/donor was 6.2. 2. The survival rates of morula stage(65.4%) were higher than those of blastocyst stage(57.l%) and vice versa in rate of morphological recovery (80% vs 95.4%). However. no significant difference was denoted between them. 3. In difference between the groups of good quality and poor quality. good quality was resulted in a significantly higher embryo survival rate(75%) and recovery rates(95%) than poor quality(P<0.0l). 4. In effects of non-permeable sugar dilution in added to l.0M glycerol. higher survival rates were orderd in sucrose. lactose, raffinose and xylose. But lactose-raffinose, sucrose-trehalose and xylose in added to 2.OM glycerol. 5. The highest survival rates were obtained by direct plunge into the liquid nitrogen with 3.OM concentration both of glycerol and trehalose. 6. The survival rates in vitro condition of one-step and direct plunge methods(75%-87.5%) were significantly higher than those of multiple steps (21.4-52.6%) in in vitro (P<0.0l). However, the results of single-step were critical in comparing to other steps of final pregnant conformation.

• 한국산학기술학회논문지
• /
• 제12권1호
• /
• pp.62-67
• /
• 2011

본 연삭공정은 제품의 품질 만족도를 충족시키기 위해 기계가공의 마지막단계에서 이루어지는 공정이다. 일반적으로 연삭된 공작물의 가공 표면은 연삭 조건 및 드레싱 조건에 의해 그 정도가 결정된다. 이러게 연삭된 공작물의 표면 거칠기를 예측하기 위해서 몇 가지 거칠기 모델들이 연구되었다. 기존의 모델들은 몇 가지 주요 파라미터를 선정하고 이들 파라미터를 곱의 형태로 모델을 만들어 그 파라미터의 영향도를 고려하였다. 그러나 이러한 파라미터간 곱의 형태는 복잡한 연삭 메커니즘을 나타내기에는 충분하지가 않다. 따라서 본 연구에서는 뉴럴네트워크 알고리즘을 이용하여 플런지 연삭의 연삭 모델을 제안하였다. 제안된 구조는 초기 거칠기 모델과 최종 거칠기 모델로 구성되어 있다. 제안된 뉴럴네트워크의 입력 파라미터는 기존의 거칠기 모델들의 것을 이용하였다. 제안된 모델의 거칠기 예측 성능은 실험을 통해 검증하였다.

• 한국항공우주학회지
• /
• 제34권1호
• /
• pp.18-23
• /
• 2006

본 연구에서는 Gurney 플랩이 달린 NACA 0012 익형에 대한 플러터 해석을 시간 영역에서 수행하였다. 2차원 비정상 압축성 Navier-Stokes 방정식과 Lagrange 방정식으로 부터 유도한 2계 자유도 plunge & pitch 모델을 지배방정식으로 하여 연성 결합 기법을 통해 플러터 해석을 수행하였다. 계산 결과 Gurney 플랩을 장착할 경우 NACA 0012에 비해 플러터가 발생하는 속도가 낮아졌고, 마하수가 0.85보다 작은 영역에서는 Gurney 플랩의 플러터 경계 곡선은 안전 여유를 상회하는 영역에 위치하였다. 그러나, 마하수가 0.85에서 0.9사이일 경우에는 안전 여유에 근접하게 되므로 이러한 운용 영역에서는 Gurney 플랩의 사용에 주의를 요한다.

• 자원ㆍ환경경제연구
• /
• 제26권3호
• /
• pp.451-472
• /
• 2017

OPEC의 생산량 발표는 원유 가격에 중대한 영향을 미치는 공급교란 요인이다. 본 연구에서는 OPEC 발표가 원유 시장에 미치는 영향을 사건연구 방법론을 이용하여 분석하였다. 특히 유가 변동 및 구조변화 시기를 고려하여 유가 기간을 3개 구간으로 구분하고, OPEC의 감산, 증산, 유지 발표가 WTI 원유 수익률에 미치는 영향을 분석하였다. 분석 결과, 각 기간별로 OPEC 발표에 따른 비정상 수익 발생의 정도와 방향이 다름을 확인하였다. 또한 유가 급등기와 급락기를 구분하여 OPEC의 생산량 유지 발표의 영향을 분석한 결과, 유가 급락 조정 기간에 유지 발표에 따른 현저한 양(+)의 비정상 수익이 유의하게 발생하였다. 본 연구는 유가 변동 시기별 OPEC 발표의 영향 및 원유거래 전략에 대한 정책적 시사점을 제공한다.

• 산경연구논집
• /
• 제12권3호
• /
• pp.43-49
• /
• 2021

Purpose: This study attempted to examine the risk of stock price plunge according to the firm's management strategy. Prospector firms value innovation and have high uncertainties due to rapid growth. There is a possibility of lowering the quality of financial reporting in order to meet market expectations while withstanding the uncertainty of the results. In addition, managers of prospector firms enter into compensation contracts based on stock prices, thus creating an incentive to withhold negative information disclosure to the market. Prospector firms' information opacity and delays in disclosure of negative information are likely to cause a sharp decline in share prices in the future. Research design, data and methodology: This study performed logistic analysis of KOSPI listed firms from 2014 to 2017. The independent variable is the strategic index, and is calculated by considering the six characteristics (R&D investment, efficiency, growth potential, marketing, organizational stability, capital intensity) of the firm. The higher the total score, the more it is a firm that takes a prospector strategy, and the lower the total score, the more it is a firm that pursues a defender strategy. In the case of the dependent variable, a value of 1 was assigned when there was a week that experienced a sharp decline in stock prices, and 0 when it was not. Results: It was found that the more firms adopting the prospector strategy, the higher the risk of a sharp decline in the stock price. This is interpreted as the reason that firms pursuing a prospector strategy do not disclose negative information by being conscious of market investors while carrying out venture projects. In other words, compensation contracts based on uncertainty in the outcome of prospector firms and stock prices increase the opacity of information and are likely to cause a sharp decline in share prices. Conclusions: This study's analysis of the impact of management strategy on the stock price plunge suggests that investors need to consider the strategy that firms take in allocating resources. Firms need to be cautious in examining the impact of a particular strategy on the capital markets and implementing that strategy.

• 무역상무연구
• /
• 제60권
• /
• pp.177-194
• /
• 2013

According to the 2013 statistics, the small/medium-sized enterprises (SMEs) accounted for 99.9% of the Korean economy with 87.8% of employment. This simple figures also indicate SMEs export extension is a key task for the national economy stimulation and job creation. The SMEs export plunge has been affected by the European financial turbulence, US financial instability, developing countries like China entering foreign markets, a weak yen, etc. EXIM Bank, in this context, will need to take a more proactive attitude to provide trade finance by, for example, reviewing the business feasibility for SMEs with a lower credit rank or investigating importers' credit status, etc. Moreover EXIM Bank provides factoring service mostly to large companies and should lower its threshold for service provision to SMEs. Finally EXIM Bank should play more than a primary forfeiting market entity. It also needs to facilitate the secondary forfeiting market.