• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.2
• /
• pp.166-173
• /
• 2012

Plug-in Hybrid Electric Vehicle is driven by the engine, the primary traction motor, and the secondary auxiliary motor generating the electric power for battery charging. Secondary auxiliary motor should be connected to the engine or separated from the engine by the clutch system. This paper presents the position controller of the BLDC motor for the clutch system of Plug-in Hybrid Electric Vehicle. The BLDC motor can be applied to the clutch system in spite of it's low accuracy of the position control due to high gear ratio between the clutch and the motor. Since the attachment and the detachment between the motor and the engine should be carried out within 0.3 seconds, the position controller with fast acceleration and deceleration is implemented. For the torque control with braking operation for the BLDC motor, the modified bipolar PWM method with low current ripple compared to the conventional unipolar PWM is presented. The position control performance of the BLDC motor for the clutch system is verified through the simulation and experiments.

• Advances in Energy Research
• /
• v.7 no.1
• /
• pp.35-52
• /
• 2020

The paper proposes a hybrid approach of artificial bee colony (ABC) and grey wolf optimizer (GWO) algorithm for multi-objective and multidimensional engine optimization of a converted plug-in hybrid electric vehicle. The proposed strategy is used to optimize all emissions along with brake specific fuel consumption (FC) for converted parallel operated diesel plug-in hybrid electric vehicle (PHEV). All emissions particulate matter (PM), nitrogen oxide (NOx), carbon monoxide (CO) and hydrocarbon (HC) are considered as optimization parameters with weighted factors. 70 hp engine data of NOx, PM, HC, CO and FC obtained from Oak Ridge National Laboratory is used for the study. The algorithm is initialized with feasible solutions followed by the employee bee phase of artificial bee colony algorithm to provide exploitation. Onlooker and scout bee phase is replaced by GWO algorithm to provide exploration. MATLAB program is used for simulation. Hybrid ABC-GWO algorithm developed is tested extensively for various values of speeds and torque. The optimization performance and its environmental impact are discussed in detail. The optimization results obtained are verified by real data engine maps. It is also compared with modified ABC and GWO algorithm for checking the effectiveness of proposed algorithm. Hybrid ABC-GWO offers combine benefits of ABC and GWO by reducing computational load and complexity with less computation time providing a balance of exploitation and exploration and passes repeatability towards use for real-time optimization.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.3
• /
• pp.91-106
• /
• 2019

The demand for lithium has increased sharply due to the explosive increase in lithium secondary batteries for environment-friendly vehicles (EV: Electric Vehicle, HEV: Hybrid Electric Vehicle, PHEV: Plug-in Hybrid Electric Vehicle). Traditionally, lithium has been produced mainly from lithium-containing minerals and brine, and recently it also has been recovered along with other valuable metals by recycling cathode materials of lithium secondary batteries. In this study, we comprehensively reviewed various recovering precesses of lithium from lithium-containing substances.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.3
• /
• pp.367-373
• /
• 2017

In this paper, a new shift map was proposed to improve the fuel economy of a transmission mounted electric device(TMED) type dual clutch transmission(DCT) plug-in hybrid electric vehicle(PHEV) by considering transmission and motor losses. To construct the shift map, powertrain efficiencies of the engine-DCT-motor were obtained at each gear step. A shift map that provides the highest powertrain efficiency was constructed for the given wheel torque and vehicle speed. Simulation results showed that the fuel economy of the target PHEV can be improved by the new shift map compared with the existing engine optimal operating line(OOL) shift control.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.140-144
• /
• 2019

This paper proposes an approach for measuring voltage of high voltage(HV) battery of plug-in hybrid electric vehicle(PHEV) and battery electric vehicle(BEV). The proposed methods use isolation resistor and isolation amplifier in order to measure high voltage which should be electrically separated from measuring circuit. In terms of practical applications their advantages and disadvantage are discussed and key design points are addressed by simulations. More importantly, the proposed methods are applicable to various applications such as on-board charger, inverter and battery management system (BMS) which are directly connected to HV battery in PHEV and BEV.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.202-203
• /
• 2011

본 논문에서는 자동차가 전기모터로 주행하다가 배터리가 방전되면 엔진으로 구동할 수 있도록 연결해 주는 클러치 시스템에 적용된 BLDC 모터의 위치제어기를 제안한다. 클러치 시스템에 사용되는 BLDC 모터의 구동은 Hall 센서로부터 검출된 회전자 위치정보를 이용하여 위치제어를 수행하였다. PHEV 시스템에서는 클러치를 엔진과 전기모터로 연결해야 하므로 정확하고 빠른 위치제어를 위해 위치제어기를 적용하였고, 클러치 연결 시 진동을 최소화하기 위해 속도제어기를 사용하여 엔진의 속도와 클러치 모터의 속도를 동기가 되도록 하였다. 또한 위치제어를 하기 전에 클러치의 초기위치를 맞춰 줘야 하므로 모터의 위치정보를 이용하여 속도제어기와 전류제어기로 모터를 일정한 위치로 이동시켰다. BLDC 모터의 전압제어를 위한 PWM 방법은 기존의 바이폴라 PWM 보다 전류리플이 적은 유니폴라 효과를 내는 새로운 바이폴라 PWM 방법을 사용하였다. 제안된 알고리즘은 시뮬레이션과 실험을 통해 검증하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.349-352
• /
• 2008

The most concerning issue in these days is the energy crisis by increasing threat of global warming and depletion of natural resources. In the situations, the Plug-in Hybrid Electric Vehicle (PHEV) is drawing attention from many countries for the next generation's car which has higher fuel efficiency and lower environmental impact. This paper presents simulation results about the limit capacity of central power-grid which doesn't have enough surplus electric power for charging PHEVs. Therefore, this paper also presents a smart charging system that can charge the PHEVs with a function of distributing demands of charging. The smart charging system is an agent facility between the government and consumer, which can recommend the best time to charge the battery of PHEVs by the lowest energy cost. This function of choosing time-slots is the technical system for the government which wants to control the consumption rate of electric power for PHEVs. Finally, this paper presents the economic feasibility of PHEVs from the two kinds of price system, midnight electric price and home electric price.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.318-319
• /
• 2011

Many countries are concentrating on the development of electric vehicle technology with increasing concerns about the global environment. Along with these concerns, plug-in hybrid electric vehicles(PHEVs) are being developed as environment-friendly cars which reduce greenhouse gas emissions and also eliminate the problem of range anxiety associated to all-electric vehicles, because the combustion engine works as a backup when the batteries are depleted. In this paper, electric equipments of the PHEV which meet the target specifications were developed, and their performance was proven through confirmatory testing on the PHEV at Korea Automotive Technology Institute(KATECH).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.330-337
• /
• 2016

In this paper, component sizing and analysis of the novel plug-in hybrid electric vehicle powertrain configuration is conducted. Newly proposed powertrain configuration in prior study has an internal combustion engine and two electric motors. To optimize component size of the vehicle system and reduction gear ratio, component sizing methodology is proposed and conducted. Required power for vehicle's dynamic performance is calculated to decide minimum power requirement of powertrain component combination. Component size of engine and electric motor are optimized using vehicle simulation to maximize fuel economy performance. Optimized powertrain configuration and vehicle simulation results present validation of newly proposed vehicle system.

• Journal of Sensor Science and Technology
• /
• v.25 no.2
• /
• pp.155-159
• /
• 2016

In this work, we have developed a test system to examine whether the charge indicator of the plug-in hybrid electric vehicle (PHEV) works properly or not. In PHEV, the driver should charge the necessary electricity by plugging in manually and be able to know the charging status through the charge indicator conveniently located for the charging individual. Our system used the CAN bus to transmit the same commands from ECU to the indicator to test the proper operation of the indicator lights. It measured the electric current values during operation and analyzed to determine the quality of the indicators. The inspection items included the proper packaging, the electrical shorts, the LED lighting during charging, the LED lighting for charging failure, and the LED lighting when errors occur. We developed the system for the operators in the factory allowing them to approve the test results at the site. We developed the hardware, the control software, and the software to store the test results and the history of the products in the database. Serial numbers were given to the good quality products and the bar code labels were printed to trace the products afterwards. Through this work, we developed a system to inspect the electric parts in real time upon fabrication. We are planning to further improve our system to inspect the brightness of the indicator by adding the vision inspection in future.