• Computers and Concrete
• /
• 제32권2호
• /
• pp.119-138
• /
• 2023

Concrete carbonation is a prevalent phenomenon that leads to steel reinforcement corrosion in reinforced concrete (RC) structures, thereby decreasing their service life as well as durability. The process of carbonation results in a lower pH level of concrete, resulting in an acidic environment with a pH value below 12. This acidic environment initiates and accelerates the corrosion of steel reinforcement in concrete, rendering it more susceptible to damage and ultimately weakening the overall structural integrity of the RC system. Lower pH values might cause damage to the protective coating of steel, also known as the passive film, thus speeding up the process of corrosion. It is essential to estimate the carbonation factor to reduce the deterioration in concrete structures. A lot of work has gone into developing a carbonation model that is precise and efficient that takes both internal and external factors into account. This study presents an ML-based adaptive-neuro fuzzy inference system (ANFIS) approach to predict the carbonation depth of fly ash (FA)-based concrete structures. Cement content, FA, water-cement ratio, relative humidity, duration, and CO2 level have been used as input parameters to develop the ANFIS model. Six performance indices have been used for finding the accuracy of the developed model and two analytical models. The outcome of the ANFIS model has also been compared with the other models used in this study. The prediction results show that the ANFIS model outperforms analytical models with R-value, MAE, RMSE, and Nash-Sutcliffe efficiency index values of 0.9951, 0.7255 mm, 1.2346 mm, and 0.9957, respectively. Surface plots and sensitivity analysis have also been performed to identify the repercussion of individual features on the carbonation depth of FA-based concrete structures. The developed ANFIS-based model is simple, easy to use, and cost-effective with good accuracy as compared to existing models.

• 한국환경복원기술학회지
• /
• 제9권1호
• /
• pp.41-54
• /
• 2006

In case of leaving artificial slopes resulting from large-scale constructions, there may be secondary damage caused by soil loss due to erosion and collapse. Furthermore, slope-restoring constructions have a few problems such as monotonous landscape and difficult succession of secondary vegetation due to reckless use of exotic grass, despite attaining the initial purpose of revegetation. To settle this problem, selected plants deemed to be proper for revegetation were used on one of thin vegetation base methods, CODRA SYSTEM, and made seeding mixture experimental plots considering germination rates differing in each season. Native herbs, native shrubs and exotic herbs contents were increased by 30% and 50% respectively, centered on seeding quantity(30g/$m^2$) used as design standard in the seed spray method, in order to figure out proper quantity for revegetation in each season.

• Structural Engineering and Mechanics
• /
• 제65권5호
• /
• pp.505-511
• /
• 2018

Recently, a new foundation model called "Dynamic foundation model" was proposed for the dynamic analysis of structures on the foundation. This model includes a linear elastic spring, shear layer, viscous damping and the special effects of mass density parameter of foundation during vibration. However, the relationship of foundation property parameters with the experimental parameter of the influence of foundation mass also has not been established in previous research. Hence, the purpose of the paper presents a simple experimental model in order to establish relationships between foundation properties such as stiffness, depth of foundation and experimental parameter of the influence of foundation mass. The simple experimental model is described by a steel plate connected with solid rubber layer as a single degree of freedom system including an elastic spring connected with lumped mass. Based on natural circular frequencies of the experimental models determined from FFT analysis plots of the time history of acceleration data, the experimental parameter of the influence of foundation mass is obtained and the above relationships are also discussed.

• Journal of Information Technology Applications and Management
• /
• 제11권4호
• /
• pp.35-47
• /
• 2004

The nuclear design analysis requires time-consuming and erroneous model-input preparation. code run. output analysis and quality assurance process. To reduce human effort and improve design quality and productivity. Innovative Design Processor (IDP) is being developed. Two basic principles of IDP are the document-oriented desigll and the web-based design. The document-oriented design is that. if the designer writes a design document called active document and feeds it to a special program. the final document with complete analysis. table and plots is made automatically. The active documents can be written with Microsoft Word or created automatically on the web. which is another framework of IDP. Using the proper mix-up of server side and client side programming under the LAMP (Linux/Apache/MySQL/PHP) environment. it e design process on the web is modeled as a design wizard style so that even a novice designer makes the design document easily. This automation using the IDP is now being implemented for all the reload design of Korea Standard Nuclear Power Plant (KSNP) type PWRs. The introduction of this process will allow large reduction in all reload design efforts of KSNP and provide a platform for design and R&D tasks of KNFC.

• 한국환경복원기술학회지
• /
• 제8권4호
• /
• pp.81-90
• /
• 2005

This study aimed to address problems and suggest solutions in applying seed mixture design criterior of the slope revegetation works according to "The guidelines of Slope revegetation design and construction" proposed by the Ministry of Construction and Transportation. To do this, the planting thickness was set to be the same 2cm while the composition of seeds was made different, which was planted in artificial slopes and fields. The main results were summarized as follows. In the test, when applying the provisional standards of the plant mixtures proposed by the Ministry of Construction and Transportation, tree seeds and native plants were found poor coverage effect in the early stage in all test plots due to introduced grasses. This was because introduced winter grasses which grew well in the early stage, could grow densely, so it might hamper the growth of other plants. Therefore, it was found desirable that standards for seed mixing should be adjusted down by 10% and the ratio of introduced grasses in the mixture should be lowered to 25% while native plants should increase to 20-25%.

• 한국작물학회지
• /
• 제43권4호
• /
• pp.264-268
• /
• 1998

The experiment was conducted to clarify irrigation requirement and percolation rate in rice paddy. The four rice cultural system of no-tin, till, transplanting, and direct seeding condition were treated in the lysimeter filled with sandy loam soil. The amounts of irrigation and soil percolation were measured daily, and irrigation requirement was estimated. The daily percolation was 19.5 l/$\textrm{m}^2$ in no-till direct seeding on flooded paddy surface, 17.4 l/$\textrm{m}^2$ in both of till-direct seeding on flooded surface and no-till transplanting, and 15.2 l/$\textrm{m}^2$ in transplanting plot. This is equivalent to 19.5, 17.4, and 15.2 mm per day, respectively. Highest irrigation requirement was 3,770 l/$\textrm{m}^2$ in no-till direct seeding plots. Others were 3,249, 2,577, and 2,321 l/$\textrm{m}^2$ in till-direct seeding, no-till transplanting and transplanting plot, respectively. The estimated irrigation requirement of no-till transplanting, till-direct seeding and no-till direct seeding was increased by 11, 37, and 59% compared to till-transplanting plot. Percolation rate of no-till transplanting, till direct seeding and no-till direct seeding was increased by 12%, 40%, and 66%, respectively compared to the till-transplanting plot. The percolation rate in paddy soil was increased greatly after reproductive stage of rice.

• Korea-Australia Rheology Journal
• /
• 제12권2호
• /
• pp.93-100
• /
• 2000

The interactions between methylated $\beta$-cyclodextrin (CD) and hydrophobically modified alkali-soluble associative polymers (HASE) were examined by a rheological technique. The effect of "capping" of hydrophobes by methylated $\beta$-cyclodextrin on the viscosity and modulus was evaluated. Model HASE polymers with $C_1$to $C_{20}$ alkyl hydrophobic groups ethoxylated with~10 moles of ethylene-oxide (EO 10) and at concentrations up to 3 wt% were examined. With the addition of methylated $\beta$-CD, the steady shear viscosity profiles shift from a Newtonian profile to one that display a shear-thinning characteristic. Significant "capping" of the hydrophobes occurs for HASE polymers with $C_{l2}$, $C_{16}$ and $C_{20}$ hydrophobes as reflected by the large reduction in the viscosity. However, the steady shear viscosity remains constant when the concentration of $\beta$-CD exceeds 1 wt%, suggesting that $\beta$-CD is not able to fully encapsulate the hydrophobes of the HASE polymer. The temperature variation plots indicate that the activation energy of the HASE-EO10-$C_{20}$ system and $\beta$-CD is dependent on the magnitude of the applied shear stress. These results further reinforce the hypothesis that $\beta$-CD is not able to completely remove all the hydrophobic associations.phobic associations.

• 조명전기설비학회논문지
• /
• 제19권6호
• /
• pp.100-108
• /
• 2005

본 논문은 제주-해남 HVDC 시스템의 주파수 제어를 다루었다. 논문의 주된 목적은 현재 사용되고 있는 동기조상기로부터의 주파수 입력원을 배제한 새로운 주파수 제어시스템을 개발하여 대체를 검증하는 것이다. 과도상태의 검토는 PSCAD/EMTDC를 이용하여 상세 모델링으로 구현하였으며, 개발된 HVDC 모델을 통하여 동기조상기의 운전정지와 계통변화에 대한 사고를 검토하였다. 결론적으로 본 논문에서는 모의실험을 통하여 현재의 동기조상기로부터 HVDC 주파수 신호원을 검출하는 것에 비하여 새로운 주파수 제어 알고리즘을 적용한 154[kV] 모선으로 변경이 제주 AC 계통의 변화에 좀더 능동적으로 대처할 수 있음을 확인하였다.

• Tribology and Lubricants
• /
• 제26권6호
• /
• pp.311-316
• /
• 2010

Surface texturing of micro dimple or pore-shaped pattern was prepared using a fiber laser system. Surface texturing was designed to have a square pattern with a particular pitch distance for each corresponding density of 5, 10, 20, and 30%. Thermal damages such as bulges and burrs formed during laser irradiation were observed around the dimples. Thermal damages were later removed by lapping using alumina particles of $0.3{\mu}m$ in diameter. Oscillating friction tests were performed against heat-treated high speed steels under lubricated condition. The lubricant used was SAE 5W-30 automotive engine oil. Normal contact pressure and oscillating frequency was 0.28 MPa and 20 Hz, respectively. The tests were continued for 20 minutes, and friction plots were recorded for examination. Results revealed that the coefficient of friction was lowered regardless of texturing density. Moreover, the lowest coefficient of friction was obtained for 10% density texturing. It is attributed to increased lubricity due to the introduction of surface texturing. In addition, it is concluded that the optimum texturing density and pattern must be found for the best lubricity and low friction.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.395-398
• /
• 2009

Currently, a new generation of ducted fan UAVs (Unmanned Aerial Vehicles) is under development for a wide range of inspection, investigation and combat missions as well as for a variety of civil roles like traffic monitoring, meteorological studies, hazard mitigation etc. The current study presents extensive results obtained experimentally in order to investigate the tip clearance effects on performance characteristics of a ducted fan for small UAV systems. Three ducted fans having different tip clearance gap and with same rotor size were examined under three different yawed conditions of calibrated slanted hot-wire probe. Three dimensional velocity flow fields were measured from hub to tip at outlet of the ducted fan. The analysis of data were done by PLEAT (Phase locked Ensemble Averaging Technique) and three non-linear differential equations were solved simultaneously by using Newton -Rhapson numerical method. Flow field characteristics such as tip vortex and secondary flow were confirmed through axial, radial and tangential velocity contour plots. At the same time, the effects of tip clearance on axial thrust and input power were also investigated by using wind tunnel measurement system. For enhancing the performance of ducted fan, tip clearance level should be as small as possible.