TiN ion-plating된 Co-Cr 선재(.016", .016"x.022")와 ion-plating되지 않은 선재(.016", .016"x.022")를 이용하고, 3 가지 종류의 브라켓(TiN ion-plating된 금속 브라켓, 세라믹 브라켓 및 플라스틱 브라켓)을 대상으로 마찰실험을 행하고, 거기에서 얻어진 마찰 특성곡선과 곡선으로부터 구한 최대 정지마찰력, 그리고 선재와 브라켓의 표면양상을 주사전자현미경으로 관찰하여 TiN ion-plating의 효과를 검토한 결과 다음과 같은 결론을 얻었다. $\cdot$3가지 종류의 브라켓에 TiN ion-plating된 선재를 사용한 경우의 마찰력은 TiN ion-plating되지 않은 선재를 사용한 경우의 마찰력보다 각각 통계학적으로 유의성있게 낮았다(p<0.05). $\cdot$3가지 종류의 브라켓에 원형 선재를 사용한 경우의 마찰력은 각형 선재를 사용한 경우의 마찰력보다 각각 통계학적으로 유의성있게 낮았다(p<0.05). $\cdot$원형 선재를 사용한 경우 TiN ion-plating되지 않은 선재를 사용한 경우가 TiN ion-plating된 선재를 사용한 경우보다 선재 및 브라켓 슬롯의 표면이 더욱 거친 양상을 나타내었다. $\cdot$각형 선재를 사용한 경우 전반적으로 원형 선재를 사용한 경우보다 선재 및 브라켓 슬롯의 표면이 더욱 거친 양상을 나타내었다. $\cdot$TiN ion-plating된 원형 선재를 사용한 경우 정지마찰력과 운동마찰력의 차는 별로 없었으나 TiN ion-plating된 각형 선재를 사용한 경우 정지마찰력은 운동마찰력보다 다소 높았다. $\cdot$TiN ion-plating되지 않은 선재를 사용한 경우가 TiN ion-plating된 선재를 사용한 경우에 비해 정지마찰력이 운동마찰력보다 휠씬 높았다.
본 연구는 교정용 선재의 직경을 증가시키기 위한 방법으로 무전해도금법의 이용 가능성 여부를 전기도금법과의 비교를 통해 알아보고자 시행되었다. 0.016 인치 스테인레스 스틸 교정용 선재에 도금을 위한 전처리를 시행한 후, 시중에 판매되는 무전해니켈도금액($Hessonic-Gr^{(R)}$, 신풍금속, 한국)을 사용하여 $90^{\circ}C$ 온도에서 0.018 인치 직경이 될 때까지 도금을 시행하였다. 무전해도금 과정 중 시간에 따른 직경증가율을 구하는 한편, 도금 후 세 지점의 직경을 계측하여 균일성을 평가하였다. 도금 금속의 정성분석을 위하여 X-선 회절분석을 시행하는 한편, 물성검사를 시행한 후 전기도금한 경우와 각각 비교 분석하였다. 연구결과 무전해도금한 군이 전기도금을 시행한 군보다 강성, 항복강도, 극한강도 모두 높은 경향을 보였으며 강성과 극한강도에서 통계적으로 유의한 차이를 나타내었다 (p<0.05). 또한 무전해도금한 군의 직경증가율은 $0.00461{\pm}0.00003mm/5min$ (0.00092 mm/min)로, 전기도금한 군의 직경증가율 $0.00821{\pm}0.00015mm/min$와 차이를 보였다. 도금 후 세 지점의 직경을 계측하여 균으성을 평가한 결과, 두 가지 도금법 모두에서 균일한 양상을 보였다. 이상의 결과로 무전해도금법을 통해 직경이 증가된 선재가 전기도금 법에 의해 직경이 증가된 선재보다 기존의 선재와 가까운 물성을 보임을 알 수 있었으며, 이의 임상적 적응을 위해서는 도금시간의 감소가 필요함을 알 수 있었다.
다이아몬드 입자를 전착한 와이어를 사용하여 실리콘 잉곳을 슬라이싱 하는 방식은 기존의 슬러리를 사용하는 방식과 달리 절단매체인 실리콘카바이드를 사용하지 않기 때문에 웨이퍼링 후에 발생하는 슬러지에 함유되어 있는 고형분의 대부분은 잉곳으로부터 분리되어 나온 실리콘 성분으로 구성되어 있다. 따라서 슬러지에 함유되어 있는 액상성분만 제거하여도 어렵지 않게 90% 이상의 순도를 가지는 실리콘을 회수할 수 있는 이점이 있다. 본 연구에서 다이아몬드 와이어 쏘잉 방식에서 배출된 슬러지로부터 오일 성분을 제거하여 고품위 실리콘 분말을 회수하였으며, 성형 및 소결공정을 통하여 실리콘에 포함되어 있는 유기물을 포함한 금속불순물을 제거하고, 미분체 실리콘의 산화가 용이한 점을 활용하여 열산화 공정으로 3N급 순도의 실리카를 제조하였다.
To estimate the possibility in the application of TiN ion-plating to the orthodontic appliance, this study investigated frictional force and frictional coefficient between non-ionplated and TiN ion-plated to the orthodontic appliance. The obtained results were as follows : 1. For each group, the frictional force between metal bracket and arch wire in the wet condition was exhibited lower than that in the dry condition. 2. In the dry condition, the frictional force was lowest with fourth group, and it increased in the order of the 3rd, 1st, and 2nd group. Same situation happened in the wet condition. 3. Experimental results using ceramic & plastic bracket showed that group B was lower than group A, and group D was similar to group C. 4. The surface texture after experiment showed that the scratch due to a friction with bracket was observed in an arch wire of dry contition. Also the surface of bracket was rougher than before. 5. We observed that a specimen surface processed with the TiN ion plating was smoother than that of without the TiN ion plating. 6. The surface texture of a metal bracket and an arch wire in the wet condition was observed smoother than that in the dry condition. 7. In the dry condition, the friction coefficient of each specimen was very similar to each other, but in the wet condition, the friction coefficient of specimen processed with the TiN ion plating showed lower values.
TiN 피막처리된 Elgiloy (Co-Cr계 선재)의 임상 적용을 검토하기 위하여 제조된 상태의 Elgiloy, $250^{\circ}C$에서 30분간 가열처리된 Elgiloy, TiN 피막처리된 Elgiloy 각각의 4가지 temper, 그리고 비교를 위하여 스테인레스강 선재의 인장 강도와 경도를 측정한 결과 다음과 같은 결론을 얻었다. $\cdot$인장강도는 모든 temper에서 TiN 피막처리된 군이 가장 높았고, 가열처리된 군, 제조상태의 군의 순으로 나타났으나 가열처리된 군과 제조상태의 군간에는 통계학적으로 유의한 차가 없었다(p>0.05). $\cdot$인장강도는 각 temper에서 TiN 피막처리시 제조상태의 Elgiloy보다 약 $10kgf/mm^2$정도의 증가를 보였다. $\cdot$경도값은 Yellow, Green, 그리고 Red temper에서는 TiN 피막처리된 군이 가장 높았고, 가열처리된 군, 제조상태의 군의 순으로 나타났으나(p<0.05), Blue temper에서는 가열처리된 군과 제조상태의 군간에 통계학적으로 유의한 차가 없었다(p>0.05). $\cdot$경도값은 각 temper에서 TiN 피막처리시 제조상태 Elgiloy보다 약 $50\~90VHN$ 정도의 증가를 보였다. $\cdot$스테인레스강의 선재와 비교할 때 제조상태에서는 Red temper와, TiN 피막처리한 경우는 Green temper와 비슷한 인장강도를 나타내었다.
Ag-Cu alloy nano powders were fabricated by the electrical explosion of Cu-plated Ag wires. Ag wires of 0.2mm diameter was electroplated to final diameter of 0.220 mm and 0.307 mm which correspond to Ag-27Cu and Ag-68Cu alloy. The explosion product consisted of equilibrium phases of ${\alpha}-Ag$ and ${\beta}$-Cu. The particle size of Ag-Cu nano powders were 44 nm and 70 nm for 0.220 mm and 0.307 mm wires, respectively. The Ag-Cu nano powders contained less Cu than average value due to higher sublimation energy compared to that of Ag. As a result, micron-sized spherical particles formed from liquid droplets contained higher Cu content.
Coated conductors have been developed to increase piece length and critical current for electric power applications. Otherwise, Many efforts were carried out to reduce AC loss of coated conductor for AC applications. Twisting and cabling processes are effective to reduce AC loss but, these processes can not be applied for tape shaped coated conductor. It is inevitable to have thin rectangular shape because coated conductor is fabricated by thin film deposition process on metal substrate. In this study, round shape superconducting wire was first fabricated using coated conductors. First of all, Ag coated conductor was used. coated conductor was slitted to several wires with narrow width below 1mm. 12ea slitted wires were parallel stacked on top of another until making up the square cross-section. The bundle of coated conductors was heat treated to stick on each other by diffusion bonding and then copper plated to make round shape wire. Critical current of round wire was measured 185A at 77K, self field.
The dental orthodontic wire provides a good combination of strength, corrosion resistance and moderate cost. The purpose of this study was to investigate the effects of TiN and ZrN coating on corrosion resistance and physical property of orthodontic wire using various instruments. Wires(round type and rectangular type) were used, respectively, for experiment. Ion plating was carried out for wire using Ti and Zr coating materials with nitrogen gas. Ion plated surface of each specimen was observed with field emission scanning electron microscopy(FE-SEM), energy dispersive X-ray spectroscopy(EDS), atomic force microscopy(AFM), vickers hardness tester, and electrochemical tester. The surface of TiN and ZrN coated wire was more smooth than that of other kinds of non-coated wire. TiN and ZrN coated surface showed higher hardness than that of non-coated surface. The corrosion potential of the TiN coated wire was comparatively high. The current density of TiN coated wire was smaller than that of non-coated wire in 0.9% NaCl solution. Pit nucleated at scratch of wire. The pitting corrosion resistance $|E_{pit}-E_{rep}|$ increased in the order of ZrN coated(300 mV), TiN coated(120 mV) and non-coated wire(0 mV).
Al-Cu alloy nano powders were produced by the electrical explosion of Cu-plated Al wires. The composition and phase of the alloy could be controlled by varying the thickness of Cu deposit on Al wire. When the Cu layer was thin, Al solid solution and $CuAl_2$ were the major phases. As the Cu layer becomes thicker, Al diminished while $Al_4Cu_9$ phase prevailed instead. The average particle size of Al-Cu nano powders became slightly smaller from 63 nm to 44 nm as Cu layer becomes thicker. The oxygen content of Al-Cu powder decreased linearly with Cu content. It is well demonstrated that the electrodeposition combined with wire explosion could be simple and economical means to prepare variety of alloy and intermetallic nano powders.
세계 환경유해물질 규제에 대응하여 반도체 substrate의 Pb-free solution의 일환으로 등장한 PPF (Pre-Plated Frame)는 패키지공정 조립성은 물론, 자동차 반도체와 같은 고 신뢰성 및 low cost 요구를 만족하기 위해 초박막 고품질의 도금층과 Sub-micro scale의 rough treatment 와 같은 미세 표면제어 기술, 그리고 Au wire로부터 Cu wire 로의 전환에 대응하는 최적화된 도금층 구조로 발전하고 있다. 이러한 기술적인 진화를 거듭해온 이 기술은 다양한 반도체 substrate에 광범위하게 사용될 수 있기 때문에 향후 PPF기술의 활용저변은 더욱 확대될 전망이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.