• 드라이브 ㆍ 컨트롤
• /
• 제16권1호
• /
• pp.36-44
• /
• 2019

Variable displacement swash plate piston pump analysis requires electric, hydraulics and dynamics which are similar to the one's incorporated in the complex fluid power and mechanical systems. The main variable capacity for the swash plate piston pumps, hydraulics or simple kinematic (swash plate degree, piston displacement) models are analyzed using AMESim, a multi-physics analysis program. AMESim is a multi-physics hydraulic analysis program that is considered good for the environment but not appropriate for environmental analysis for multibody dynamics. In this study, the analytical model of the swash plate type hydraulic piston pump variable capacity is modeled by combining the hydraulic part and the dynamic part through co-simulation of multibody dynamics program (Virtual.lab Motion) and multi-physics analysis (AMESim). This paper describes the whole modeling analysis method on the mechanical analysis of the multi-body dynamics program and how the hydraulic analysis in multi-physics analysis program works. This paper also presents a methodology for analyzing complex fluid power systems.

• 한국화재소방학회논문지
• /
• 제31권3호
• /
• pp.79-87
• /
• 2017

샌드위치패널은 양면이 철판이며 단열재로 접착된 특징을 갖는 건축자재로서 시공의 간편성, 자재비용의 경제성 등의 장점으로 공장 및 창고 구조물 등에 사용되고 있다. 그러나 샌드위치패널의 연속적 결합으로 시공되는 패널구조물은 패널과 패널이 연결되는 조인트 부위가 발생하게 된다 조인트부위는 화재시 철판의 용융과 변형으로 화염이 쉽게 유입되며 화재에 취약한 부위이다. 패널 내에 유입된 화염은 급속한 연소로 인해 화재확산을 유발하며 인명 및 재산피해를 발생시킨다. 본 연구에서는 샌드위치패널의 화재확산을 방지하기 위한 화재확산방지플레이트를 개발하였다. 이는 기존 선행연구에서 4면의 패널 접합면을 화재확산방지 재료로 시공하는 방법에서 접합면에 개발 플레이트를 끼우는 방식으로 시공이 용이하게 개선된 것으로서 패널과 패널이 결합되는 연결부에 자립하여 적용 가능하며 화염의 유입 및 화재확산을 방지하도록 고안하였다. 샌드위치패널 시험체에 대해 KS F ISO 13784-1 시험방법의 실물화재시험을 수행하였으며, 패널 연결부에 화재확산방지플레이트의 적용 유무에 따른 연소거동을 파악하고 그 효과를 측정하였다. 시험결과 패널 연결부에 화재확산방지플레이트를 삽입하는 것은 플래시오버의 지연, 시험체의 붕괴방지, 개구부의 온도상승을 지연시키는 것으로 측정되었으며, 효과적으로 패널구조물이 화재안전성을 확보할 수 있는 방안으로 확인되었다. 화재에 취약한 패널 연결부에 시공성과 경제성이 확보된 다양한 방식의 화재확산방지용 시공방법을 적용하는 것은 구조물의 화재안전성을 확보하는데 기여할 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1540-1555
• /
• 2021

The plate-type fuel assembly adopted in nuclear research reactor suffers from complicated effect induced by non-uniform irradiation, which might affect its stress conditions, mechanical behavior and thermal-hydraulic performance. A reliable numerical method is of great importance to reveal the complex evolution of mechanical deformation, flow redistribution and temperature field for the plate-type fuel assembly under non-uniform irradiation. This paper is the first part of a two-part study developing the numerical methodology for the thermal-fluid-structure coupling behaviors of plate-type fuel assembly under irradiation. In this paper, the thermal-fluid-structure coupling methodology has been developed for plate-type fuel assembly under non-uniform irradiation condition by exchanging thermal-hydraulic and mechanical deformation parameters between Finite Element Model (FEM) software and Computational Fluid Dynamic (CFD) software with Mesh-based parallel Code Coupling Interface (MpCCI), which has been validated with experimental results. Based on the established methodology, the effects of non-uniform irradiation and fluid were discussed, which demonstrated that the maximum mechanical deformation with irradiation was dozens of times larger than that without irradiation and the hydraulic load on fuel plates due to differential pressure played a dominant role in the mechanical deformation.

• 지능정보연구
• /
• 제8권1호
• /
• pp.87-101
• /
• 2002

본 논문에서는 컬러 정보와 퍼지 c-means 알고리즘을 이용한 차량 번호판 인식 방법을 제안하고 차량 번호판 인식을 이용한 주차관리시스템 개발에 대해서 기술한다 컬러 정보와 퍼지 c-means알고리즘을 이용한 차량 번호판 인식 기술은 차량의 영상에서 번호판을 추출하는 부분과 추출한 번호판 영역에서 문자를 인식하는 부분으로 구성된다 본 논문에서는 최빈수 평활화를 이용하여 차량 영상에서 녹색 잡음을 제거하고 RGB컬러에서 녹색 정보와 횐색 정보를 이용하여 번호판 영역을 추출하였다. 추출된 번호판 영역의 코드들은 히스토그램 방법을 이용하여 추출하였고 FCM(Fuzzy c-means) 알고리즘을 이용하여 차량 번호판을 인식하였다. 80개의 실제 차량 영상을 대상으로 실험한 결과는 제안된 번호판 영역 추출 방법이 기존의 RGB정보를 이용한 방법과 HSI를 이용한 방법보다 추출율이 개선되었다 그리고 FCM 알고리즘을 이용한 차량 번호판 인식이 효율적인 것을 확인하였다. 실험을 통하여 성능 향상을 보인 제안된 차량 번호판 방법을 이용하여 주차관리시스템을 개발하였다.

• 한국연안방재학회지
• /
• 제4권3호
• /
• pp.111-118
• /
• 2017

In this study, pull box members were designed by finite element analysis of a steel plate covering a pull box to secure its safety on the landing pier dedicated to the large research survey ship. It was assumed that the maximum load is due to the 250 tonf class crane used for unloading work when the working environment in the upper part of the landing pier was considered. The safety of the pull box was evaluated by the comparison between the yield strength of the steel plate and the result of stress analysis on the steel plate due to the crane load. It was found that the stress at the plate from the crane load exceeded the yield strength of the steel(205MPa) when the upper part of the pull box was protected by a $1950{\times}1950mm$ steel plate cover. In order to compensate for this, a concrete filled steel tube(CFT) column with a diameter of 150 mm and a steel thickness of 10 mm was reinforced at the center of the plate, and the finite element analysis was carried out. However, the maximum stress at the steel plate was higher than the yield strength of the steel in some load cases so that it was tried to find appropriate thickness of the steel plate and diameter of the CFT columns. Finally, the analysis results showed that the safety of the pull box was secured when the thickness of the steel plate and the diameter of the CFT column were increased to 30mm and 180mm, respectively.

• 대한기계학회논문집
• /
• 제15권3호
• /
• pp.771-788
• /
• 1991

본 연구에서는 편심된 강성 강화 부재가 붙어 있는 얇은 판 또는 얇은 셸에 대해 유한 요소 해석을 할 때, 편심된 강성 강화 부재를 개별된 요소로서 정확히 묘사 할 수 있도록, 일반적인 보 이론을 기초로 하여 2개의 절점을 갖고, 각 절점당 6자유 도를 갖는 3차원 편심 보 요소(offset beam element)에 대하여 수식화하여 변위와 응 력을 계산한다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2006년도 동계 학술대회 논문집
• /
• pp.31-34
• /
• 2006

Purposes of this research are convenience of manufacture, quality sophistication and reduction of a/s' ratio by that improve several shortcomings of existing steel housing The Housing of head is changed existent steel housing to ABS (acrylonitrile butadiene styrene) copolymer housing and its shape is changed. It does not need that paint housing by paint. so We may not care scar at storage or manufacture. The fast work speed and A/S is possible by combining a safety plate and a housing by volt and spring washer. When disjoint head part, there is no damage of safety plate and housing. Noise is disappeared by resonance phenomenon in early rpm at motor moving. When neck part of housing and a middle pipe are connected by drill nasa, the work is easier Also, there is sense of security little more catching motor in housing The improvement accomplished much improvements including light weight of head part.

• 한국소음진동공학회논문집
• /
• 제23권2호
• /
• pp.185-191
• /
• 2013

This paper presents a new method for roller design of IRB(isolation roller bearing) seismic isolation device using experimental evaluation. Three layered plate is adopted for the IRB in which the upper plate is placed on x direction and the lower plate is placed on y direction. The rollers placed in each plate make a plate movement. The roller is then optimally designed using variable geometric conditions. Stress distribution depends on the diameter and length of the roller and hence this is used for the determination of optimal geometry of the roller. In the experimental evaluation, it is observed that stress concentration at the end sides of roller is decreased and geometric coefficients depend on crowning dimension. In addition, in order to determine optimal design parameters of the roller the plastic deformation and friction are experimentally identified.

• Journal of Welding and Joining
• /
• 제27권3호
• /
• pp.92-96
• /
• 2009

Metallic sandwich plate has many good properties such as high specific stiffness, high specific strength, good impact absorptivity, effective thermal insulation and soundproofing. In our study, a new bonding method, 3-layer roll projection welding, is introduced to fabricate the metallic sandwich plate. The new method uses a pair of roll electrodes like the seam welding, and projection welding is made at two internal interfaces of the 3-layer weldment consisting of a structured inner sheet and a pair of skin sheets. During the welding process, skin sheet temperature are measured to produce metallic sandwich plate with uniform and good quality. But it is difficult to observe or measure the temperature at the welding points during welding process because the welding points exist at the internal interfaces. Therefore FEM numerical analysis using ABAQUS is conducted to estimate the generated heat at the welding points with different welding conditions.

• 소성∙가공
• /
• 제18권2호
• /
• pp.177-182
• /
• 2009

A work of thin-walled outsell injection molding technology for a plastic part of moldframe applicable in a display product was performed in the present study. The thin-walled plastic part is one of the core parts in the display product, which supports and protects a light guide plate and back light unit from external environmental conditions. It globally has the shape of rectangular and surrounds the light guide plate and back light unit for each class of inch, however, the cross section of the part is not clear to define the thickness. This causes the difficult problem of injection molding itself for the part. Moreover, a metal outsell part makes a difficult problem in injection molding over it. Because the mold temperature control of the parts are not uniform in thickness direction due to the metal part. A careful injection melding analysis and injection mold design from the analysis results have to be proceeded to obtain a production of precision moldframe. Therefore, optimization for injection molding process and analysis of warpage characteristics were studied. Consequently, it was possible from the presented virtual manufacturing process that the manufacturing of precision thin-walled outsell moldframe.