• 대한수의학회지
• /
• 제31권2호
• /
• pp.143-154
• /
• 1991

The present study was undertaken to provide basic data on fetal endochondral ossification for the native Korean cattle femur. This study was determined to the both earliest stages of chondrification and ossification by histochemical methods. The forty-five pairs of femur, from a series of embryos and fetuses ranging from 11 to 100mm in crown-rump(C-R) length, were used. These samples were divided into 9 groups. The groupings were based on C-R length, as the first grouping being 11~20mm, the second grouping being 21~30mm and so on. The results were as follows: 1. Alcianophility and PAS reaction were markedly increased in the perichondrium and interterritorial matrix in the 3rd group(C-R length 31~40mm). These reactions were decreased in the territorial matrix and in the adjacent area to the cartilage canal in the 5th group(C-R length 51~60mm). 2. Calcium deposits and collagen substances were observed initially in the 3rd group(C-R length 31~40mm). The calcium deposits and calcified cores were observed in the trabeculae of the proximal epiphyseal plate of the femur in the 8th group(C-R length 81~90mm).

• 대한치과기공학회지
• /
• 제41권4호
• /
• pp.279-285
• /
• 2019

Purpose: The dental CAD / CAM system has been popular with the development of the digital dental industry. Zirconia is a typical material in dental CAD / CAM systems. Zirconia crowns are classified into single layer and double layer. This study is about the double layer crown of zirconia. The surface roughness, bond strength and fracture patterns of the zirconia surface were observed. Methods: Zirconia blocks were cut using a low speed cutter. Sintered to form a plate shape (6mm × 6mm × 3mm). The prepared specimens were surface treated in four ways. Surface roughness and bond strength were measured. And the fracture pattern was observed. Results: Result of surface treatment of zirconia. The surface roughness test results were as ET 2.87 ㎛, ST 2.67 ㎛, LT 2.44 ㎛, AT 2.41 ㎛, CN 2.08 ㎛ order. Bond Strength results were as LT 25.09 MPa, AT 23.27 MPa, ST 21.27 MPa, ET 21.09 MPa, CN 16.12 MPa order. Fracture patterns showed cohesive failure of 25-50% of the bond area. Conclusion: Surface roughness, bond strength and fracture pattern of the zirconia surface were observed. Etching the surface treatment of zirconia materials has been shown to affect the surface roughness. Zirconia special binder treatment has been shown to affect the bond strength improvement.

• 한국정밀공학회지
• /
• 제25권11호
• /
• pp.66-72
• /
• 2008

During the plate and foil cold rolling process, considerable values of the force of material pressure on the tool occur. These pressures cause the elastic deformation of the roll, thus changing the shape of the deformation legion. Rolled copper foils should be characterized by a good quality and light dimensional tolerances. Because of automation that is commonly implemented in flat product rolling mills, these products should meet the requirements of tightened tolerances, particularly strip thickness, and feature the greatest possible flatness. The shape of the roll gap is influenced by the elastic deformation of rolls parts of the rolling process affecter of the pressure force. However, to control roll deformation should be difficult. Because the foil thickness is very thin and the permissible deviations in the thickness of foil are small. In this paper, FE-simulation of roll deformation in thin foil cold roiling process is presented.

• 보존과학연구
• /
• 통권27호
• /
• pp.83-102
• /
• 2006

The Suchon-ri tomb No. 1 is the earliest one among the Suchon-ri tombs excavated in 2003. The Suchon-ri tomb No. 1 yielded a number of valuable artifacts furnished with burial goods such as gilt bronze items of a crown, a pair of earrings and shoes and a loop-handled sword with inlaid silver decoration. In particular, a loop-handled sword drew scholarly attention in that it showed characteristics of Baekje such as wave patterns on a silver plate decorated in the handle and sheath and inlaid dragon design on the loop-handle. In the process of the reproducing the loop-handled sword, classification methods of the loop-handled swords, iconography decorated on the swords, unearthed loop-handled swords of the Three Kingdoms Period have been investigated along with studying the reproduction cases in Japan. In addition to the study focused on the shape of the swords, manufacturing techniques have been thoroughly analyzed through scientific methods. Finally, based on the synthesis of a series of studies and analyses, traditional manufacturing techniques employed by Baekje artisans had been inferred and a replica of the loop-handled sword was manufactured with the traditional methods.

• 한국기후변화학회지
• /
• 제5권3호
• /
• pp.219-230
• /
• 2014

In this study, greenhouse gas emission of magnesium industry was estimated and the reduction potential of the greenhouse gas emission was evaluated with reduction technologies. Default value of IPCC guideline was used to calculate the greenhouse gas emission and $SF_6$ alternatives were considered in reduction potential. Import of magnesium ingot was 22,806 ton in 2013, which will be expected to increase to 81,700 ton with 20% rate in 2020. Magnesium ingot was consumed to produce magnesium alloy in diecasting process. Recently, commercial production of crown magnesium and magensium plate began. Based on ingot consumption, $CO_2$ emission of domestic magnesium industry was estimated to 504,000 ton, which is about 0.79% of domestic industrial emissions. Reduction potential of diecasting process was estimated to 489,320 ton by changing SF6 to alternative gases such as HFC-134a, Novec-612. Emission factor of Tier 3 level should be developed to enhance the accuracy of greeenhouse gas emission of magnesium industry.

• 대한치과교정학회지
• /
• 제47권6호
• /
• pp.375-383
• /
• 2017

Objective: The purpose of this study was to evaluate the dental and skeletal effects of the modified C-palatal plate (MCPP) for total arch distalization in adult patients with Class II malocclusion and compare the findings with those of cervical pull headgear. Methods: The study sample consisted of the lateral cephalograms of 44 adult patients with Class II Division 1 malocclusion, including 22 who received treatment with MCPP (age, $24.7{\pm}7.7years$) and 22 who received treatment with cervical pull headgear (age, $23.0{\pm}7.7years$). Pre- (T1) and post-treatment (T2) cephalograms were analyzed for 24 linear and angular measurements. Multivariate analysis of variance was performed to evaluate the changes after treatment in each group and differences in treatment effects between the two groups. Results: The mean amount of distalization at the crown and root levels of the maxillary first molar and the amount of distal tipping was 4.2 mm, 3.5 mm, and $3.9^{\circ}$ in the MCPP group, and 2.3 mm, 0.6 mm, and $8.6^{\circ}$ in the headgear group, respectively. In addition, intrusion by 2.5 mm was observed in the MCPP group. In both groups, the distal movement of the upper lip and the increase in the nasolabial angle were statistically significant (p < 0.001). However, none of the skeletal and soft tissue variables exhibited significant differences between the two groups. Conclusions: The results of this study suggest that MCPP is an effective treatment modality for total arch distalization in adults.

• 대한소아치과학회지
• /
• 제37권4호
• /
• pp.519-525
• /
• 2010

이소맹출(ectopic eruption)은 여러 가지 원인들에 의해 치아가 비정상적 위치로 맹출하는 경우를 말하며, 주로 상악 제1대구치, 하악 측절치 그리고 상악 견치에서 발생된다. 이소맹출 한 상악 제1대구치는 정상보다 근심방향으로 맹출하여, 동측상악 제2유구치의 원심협측 치근을 흡수시키며, 결국 상악 제1대구치는 상악 제2유구치 하방에 걸리게 된다. 상악 제1대구치는 저작기능 및 교합에 중요한 역할을 하고 있으므로, 이소맹출 한 상악 제1대구치는 적절한 위치로 이동이 필요하다. 상악 제1대구치를 적절한 위치로 이동하기 위한 치료방법으로는 brass wire 또는 elastic ring을 이용한 separation, 상악 제2유구치의 원심면 삭제, finger spring을 포함한 고정성 또는 가철성 장치, 상악 제2유구치를 발치한 후 공간유지장치 또는 공간회복장치의 이용 등이 있다. 본 증례들은 강릉대학교 치과병원에 내원한 환자들에서 이소맹출 한 상악 제1대구치를 기성금관의 재시적, brass wire의 적용, active plate를 이용하여 적절한 위치로 이동시켜 양호한 교합을 이루었기에 이를 보고하는 바이다.

• 한국환경생태학회지
• /
• 제12권1호
• /
• pp.78-90
• /
• 1998

본 연구는 1980년대 후반부터 조성된 5개 신도시 공동주택단지의 완충녹지를 대상으로 녹지의 형태와 식재기법, 효과 등을 분석하여 완충녹지 조성시 배식에 이용할 수 있는 자료 구축을 목적으로 하였다. 연구대상지 완충녹지의 형태는 마운딩형, 사면형, 펴연형이었으며 식재된 수종으로는 교목은 상록수 10종, 낙엽수 20종의 총 30종이었고 관목은 총 13종 이었으며 도시공원 등의 관상용수종과 차이가 없었고 식재는 단층적으로 한 상태였다. 완충녹지에 의해 소음완화 효과는 인정되었으나 7개 조사유형중 4유형에서는 공동주택단지의 소음 기준치(65dB) 이하의 완충효과를 보이지 못했다. 소음완화효과는 마운드형이 효과적이었다. 본 연구대상지는 식재밀도, 녹지용적계수는 완충녹지의 기능을 충족시키지 못하고 있으며 자연림과 비교했을 때 식재밀도가 매우 적었고 녹지용적계수도 기준 녹지에 비해 션격히 낮은 값을 나타내어 개선이 요구되었다. 완충녹지는 높이를 2m 이상으로 한 마운딩형으로 조성지역 인근 자연림의 식생구조를 모델로 하는 복층적 식재기법을 이요하여 조성하는 것이 바람직한 것으로 판단되었다.

• 대한치과기공학회지
• /
• 제35권3호
• /
• pp.185-192
• /
• 2013

Purpose: The aim of this study was to compare with color reproducibility of the coating method and dipping method using a colour liquid. Methods: Two groups of square-shaped specimens ($10mm{\times}10mm$ in diameter, 1.5mm thickness) were prepared for analysis(n=15/group). The CM(Coating Method) group was fabricated as full zirconia specimens with the coating coloring method and Group DM(Dipping Method) was prepared as specimens of 0.7 mm-thick zirconia plate using the dipping coloring method and veneered with 0.8mm-thick porcelain. Color parameters were measured with ShadeEye $NCC^{(R)}$ spectrophotometer and color differences were calculated using the equation ${\Delta}E^*= \{({\Delta}L^*)^2+({\Delta}a^*)^2+({\Delta}b^*)^2\}^{1/2}$. Non-parametric statistical methods, the Mann-Whitney test, and the Kruskal-Wallis test were used to analyze the data. Type one error rate was set at 0.05. Results: Color difference values larger than 7 were observed between specimens with the coating method and the dipping method, which were detectable difference in a clinical setting. Conclusion: Cautious application of the coating coloring method in a clinical setting and further researches to standardize the coating method are needed.

• 복식
• /
• 제58권5호
• /
• pp.13-34
• /
• 2008

In Headgear and Ornaments for Diadem in the Period of the Three States there was Conical Cap(or Pointed Cap), Feathered Cap(Trim), and Crown[Tree-typed Diadem and Tree and Antler-typed Diadem] was excavated from the tombs. Feathered Trim is 5 types, Feathered Trim I-A, Feathered Trim I-B, Feathered Trim II-A, Feathered Trim II-B, Feathered Trim II-C in according to upper part of central insert plate style. Feathered Trim I-A, I-B, II-B type was general style that was found in most of the old tombs in ancient Silla, Gaya. Feathered Trim II-A type was excavated from the only Silla tombs and II-C type was excavated from Gaya tombs. The Ornaments for Diadem in Baekje was excavated from the tombs is adorned with a arranged leaf-stems on either sides and the flower-shaped. They were distinguished with the original mode of Goguryeo and ancient Silla at the time. Tree-typed Diadem is five part in according to the Mountain(;山)-typed piled up. Only one Mountain(;山)-typed one in three stand-up ornament(I-1 type), and three step one in three stand-up one(I-2 type), modification one (I-3 type), three step one of four and five stand-up ones(I-4 type), and four step one of four and five stand-up ones (I-5 type). Tree and Antler-typed Diadem is three part in according to the step of Mountain(; 山)-typed and cross-shaped of the upper part. Three one of three step one of Mountain(;山)-typed and two Antler- typed (II-1 type), cross-shaped one(II-2 type), four step one(II-3 type).