• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.11-16
• /
• 2019

The four different polymer compounds were manufactured with the two kinds of plasticizers [(di-2-ethylhexyl sebacate(DOS), and di-2-butyl sebacate(DBS)] and two different additive amounts(18, 26 phr) of the same plasticizer for making cable sheath for ship. Ethylene-vinylacetate, ethylene-propylene-diene-copolymer as matrix polymers and ethylene-vinylacetate grafted maleic anhydride as coupling agent were selected for compounding with fire retardant, closslinking agent, filler, and other additives besides plasticizer. The compound including DOS showed the higher ${\Delta}T$ than that including DBS at the same additive amount in the rheology test. And with increasing plasticizer, the compounds resulted in lower tensile strength and higher elongation by lubricating effect of plasticizer. DOS yielded better aging resistance and cold resistance than DBS due to the good heat resistance and low solidifying point of DOS compared to DBS.

• Preventive Nutrition and Food Science
• /
• 제10권1호
• /
• pp.88-91
• /
• 2005

To improve the physical properties of protein films, various plasticizers and cross-linking agents were used in the preparation of the films. For zein film, 3% polypropylene glycol with 3% glycerol was the best plasticizer, while 2.5% glycerol was the most suitable for soy protein isolate (SPI) film in terms of tensile strength (TS), % elongation, and water vapor permeability (WVP). Formaldehyde, glutaraldehyde, glyoxal, and cinnamaldehyde as cross-linking agents of protein films were used to further improve the physical properties of the films. All aldehydes used as cross-linking agent in this study improved TS of zein and SPI films. In particular, cinnamaldehyde was the best cross-linking agent due to its safety in foods. These results suggest that appropriate use of plasticizer and cross-linking agent like cinnamaldehyde should improve the physical properties of protein films for use in food packaging.

• 자원리싸이클링
• /
• 제10권6호
• /
• pp.3-8
• /
• 2001

연질PVC(polyvinyl chloride) 재료를 알카리수용액 중에서 반응온도 $80~120^{\circ}C$, 반응시간 0~24시간으로 처리하였을 경우 PVC의 탈염소가 일어나기 이전에 첨가제만을 선택적으로 분리.회수하는 목적으로서 가소제의 침출거동에 관해서 검토하였다. 10$0^{\circ}C$ 이하에서는 연질PVC재료에서의 탈염소는 거의 일어나지 않았으며 또한 NaOH농도가 5M이상에서는 가소제의 용출율은 100% 였다. 따라서 반응온도 및 NaOH농도를 조절함으로써 연질PVC재료로부터 탈염소가 일어나기 이전에 가소제만을 선택적으로 분리하는것이 가능했다.

• Elastomers and Composites
• /
• 제54권3호
• /
• pp.220-224
• /
• 2019

Herein, three polymer compounds were manufactured using three polymer combination methods, ethylene-vinyl acetate/ethylene-propylene-diene-copolymer (EPDM), ethylene-vinyl acetate (EVA)/polyethylene-A (PE-A; density: 0.870), and ethylene-vinyl acetate (EVA)/polyethylene-B (PE-B; density: 0.885), for making cable sheath for use in the shipping industry. In this study, EVA, EPDM, PE-A, and PE-B were used as matrix polymers, and EVA-grafted maleic anhydride was used as a coupling agent for compounding with various compounds such as a fire retardant, cross-linking agent, filler, and other additives, besides the plasticizer. ${\Delta}T$, Mooney viscosity, and tensile strength increased in order of EPDM < PE-A < PE-B, the probable reason is due to the different crosslinking effect. The three compounds showed similar results for fire resistance and aging resistance after compounding process, but they showed excellent cold resistance owing to the non-polarity of the polymers and sufficient plasticizer content.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.280-286
• /
• 2017

The mechanical and dynamic properties according to the content of filler, plasticizer, and crosslinking agent of rubber composites for Lipseal were measured in this study. The mechanical properties of the composite including the silane coupling agent and silica were found to be superior to those of the composite containing carbon black. It was found that the rebound resilience characteristics were influenced by the crosslink density of sulfur rather than the filler or plasticizer. In the case of recovery, it was confirmed that the elastic restoring force improved in the compression deformation condition and recovery increased as the crosslinking density increased. The rubber composite for Lipseal of this study is expected to improve the manufacturing technology of the rubber composite which can implement the optimum function for recognizing the performance such as oil resistance, durability and compression set.

• Elastomers and Composites
• /
• 제54권1호
• /
• pp.35-39
• /
• 2019

Four different polymer compounds were prepared from four kinds of plasticizers, viz. di-2-ethylhexyl azelate (DOZ), di-2-ethylhexyl adipate (DOA), di-2-ethylhexyl sebacate (DOS), and di-2-butyl sebacate (DBS), for making cable sheaths for ships. Ethylene-vinyl acetate and ethylene-propylene-diene-copolymer as matrix polymers and ethylene-vinyl acetate grafted maleic anhydride as a coupling agent were compounded with a flame retardant, crosslinking agent, filler, and other additives, besides the plasticizer to obtain the polymer compounds. The polymer containing DOZ showed the highest MH and ${\Delta}T$ in the rheology test, while that containing DBS was found to have the lowest tensile strength and highest elongation because of low ${\Delta}T$. The four polymers showed similar values (31.7-31.9) for flame resistance, while the polymer containing DOZ showed the highest value for cold resistance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.75-78
• /
• 2003

This study is to investigate the probability to develop the AE Water-reducing agent which can decrease the bleeding by mixing melamine type super-plasticizer(SP) and methyl cellulose(MC) viscosity agent. According to the result, as the mixing ratio of melamine type SP and MC viscosity agent increases, the bleeding is reduced due to a increase of the air content. When the mixing ratio of melamine type SP and MC viscosity agent is 1:2 and 1;3 at the water content of 165kg/$m^3$ and 175kg/$m^3$ respectively, slump and air content are satisfied and bleeding is reduced to some extent, so this is determined as the mixing ratio of AE water reducing agent for reduction of bleeding. It is prove that the developed AE water reducing agent for reduction of bleeding can reduce the amount of bleeding and prohibit the plastic shrinkage crack by slowing down the bleeding speed. Compressive strength of hardened concrete does not make any difference in comparison with plain concrete.

• 한국지반환경공학회 논문집
• /
• 제11권4호
• /
• pp.33-42
• /
• 2010

구조물 뒤채움재로서 하중경감을 위해 사용되는 경량기포콘크리트는 기포의 소포작용에 의해 체적이 감소하여 재주입하는 문제점이 있다. 따라서 본 연구에서는 체적의 감소 문제를 보완하고자 가소제를 첨가한 가소성 경량기포콘크리트를 제작하였고, 공학적 특성을 실험적으로 규명하고자 하였다. 가소성 경량기포콘크리트의 공학적 특성을 파악하기 위해 배합요소들의 변화에 따른 일축압축강도, 단위중량, flow, pH, 투수시험에 대한 연구를 진행하였다. 실험결과로부터 가소제의 첨가에 따른 공학적 특성을 비교 분석하였고, 에트링자이트의 생성으로 인하여 flow값에 가장 큰 영향을 주는 것으로 나타났다. 가소제의 적정 첨가량은 2~2.4%정도가 적당할 것으로 판단되며, 구조물 배면의 충전재료로 사용하여 하중 경감측면과 재료의 과도한 유동성에 의한 안정성 증가에 큰 효과가 있을 것으로 판단된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.7-10
• /
• 2004

This paper investigated the possibility of quality restoration of deteriorated concrete caused by long distance delivery using chemical admixtures such as superplasticizer. AE agent and retarding agent. According to test results, long distance delivery lead to reducing fluidity and air content markedly, while setting time accelerated. Quality restoration agent(QRA) was made by combining super- plasticizer. AE agent and retarding agent with the proportion of 1:0.0025:0.1. It was confirmed that deteriorated concrete achieved quality restoration with the level of target slump, air content and setting time without strength loss when using QRA with proper amount.

• 폴리머
• /
• 제26권6호
• /
• pp.778-784
• /
• 2002

덱스트란 용액으로 필름을 제조하여 여러 가지 특성들을 살펴보았으며, 가소제 및 가교제를 첨가하거나 저온 플라스마로 표면을 처리함으로써 이러한 특성들을 향상시킬 수 있는 지를 살펴보았다. 덱스트란 필름은 기계적 강도는 우수하였으나 부스러지기 쉽고 수분에 대단히 약한 특성을 보였다 가소제를 첨가할 경우에는 유연성이 크게 개선되는 대신에 기계적 강도가 크게 약화되었다. 하지만, 가소제를 첨가한 다음 가교제로 가교시키거나 함께 첨가할 경우에는 비교적 우수한 기계적 강도와 함께 유연성을 지닌 필름이 제조되었으며, 수분에 대한 저항성도 향상되었다. 또한, 아세틸렌 플라스마로 처리할 경우 필름 자체의 특성은 크게 변하지 않으나 친수성인 표면이 소수성으로 바뀌었다.