• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.175-176
• /
• 2017

Many problems in various aspects such as generation of plastic/dry contraction cracks and cold joints can be caused unless proper quality control measures are established in hot weather circumstances. Therefore, this study aimed to compare the crack patterns of concrete by applying a change in 3 surface curing methods such as a mono aluminum-deposited bubble sheet developed to reduce the temperature and cracks through reflection of heat in summer and a PE film and a surface exposure used generally to an actually constructed apartment slab. The study result confirmed that the best concrete crack reduction effect can be obtained with a mono aluminum-deposited bubble sheet.

• Korean Journal of Food Science and Technology
• /
• v.14 no.2
• /
• pp.156-161
• /
• 1982

Three plastic film solar dryers covered with different film layer were constructed by modifying farm vinyl house and studied their performance. The collection efficiency and temperature raising of type C which was covered with double layers of transparent PE and black PVC film was most efficient, followed after B covered with double layer of transparent PE film and type A covered with single layer transparent PE film. The inside temperature of type C was average $18^{\circ}C$ higher than ambient temperature and its collection efficiency showed 31.5% with air flow rate of $3.8m^3/min$. The solar energy collection efficiency of type C was increased in proportion to air flow rate up to 60.2% at $11.3m^3/min$. In demonstration drying test of red pepper in type C, drying capacity per unit area was 2.5 times higher than that of conventional solar drying on straw mat and drying time shortened to about half.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.2
• /
• pp.67-74
• /
• 2010

To a series of vibration records obtained from experimental modal testing using a fixed hammer and roving accelerometers for greenhouse arch structures, modal parameters such as natural frequencies, damping ratios and mode shapes are extracted by applying the two most advanced system identification methods in the frequency-domain up to now, so-called PolyMAX and FDD. The former involves both input and output data, while the latter utilizes only the output data. The possibility of determining the static buckling load, detecting damages, etc., for very slender steel-pipe arches by means of a non-destructive testing method based on vibration measurements is primarily investigated. The extracted modal parameters generally correlated well with those obtained using finite element analysis, demonstrating promising results for further on-going research.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.2
• /
• pp.57-65
• /
• 2010

To determine the static buckling loads and evaluate the structural performance of slender steel pipe-arches such as for greenhouse structures, a series of modal tests using a fixed hammer and roving sensors was carried out, by providing no load, then a range of vertical loads, on an arch rib in several steps. More attention was given to an internal arch where vertical and horizontal auxiliary members are not placed, unlike an end arch. Modal parameters such as natural frequencies, mode shapes and damping ratios were extracted using more advanced system identification methods such as PolyMAX (Polyreference Least-Squares Complex Frequency Domain), and compared with those predicted by commercial FEA (Finite Element Analysis) software ANSYS for various conditions. A good correlation between them was achieved in an overall sense, however the reduction of natural frequencies due to the existence of preaxial loads was not apparent when the vertical load level was about up to 38% of its resistance. Some difficulties related to the field testing and parameter extraction for a very slender arch, as might arise from the influences of neighboring members, are carefully discussed.

• Korean Journal of Agricultural Science
• /
• v.45 no.4
• /
• pp.623-634
• /
• 2018

This experiment was conducted to determine the effects of the pre- and post-harvest variable factors on the processed product of kimchi cabbage. Two kimchi cabbage cultivars, namely 'Chungwang' and 'Dongpung,' were grown in a field and under a plastic greenhouse condition and stored at $5^{\circ}C$ after harvesting with and without low-density polyethylene (LDPE) film packaging. Growths were determined after harvesting while salting characteristics were determined after the processing and storage. The results show that the height, weight and leaf thickness were higher in kimchi cabbages grown in the greenhouse than those grown in the field. The plastic house culture increased the kimchi cabbage growth of the head weight, head height and leaf thickness compared with that of the open field culture. However, the osmolality and firmness were higher in the outdoor cultivated kimchi cabbages. Kimchi cabbage packed in film covered sacks and stored at $5^{\circ}C$ showed lower weight loss than unpacked cabbages during storage. Salt concentration and pH were also affected by the different pre- and post-harvest factors after salting the kimchi cabbages. Salt concentrations of the kimchi cabbage were influenced by various factors such as the cultivars, cultivation methods and storage covering. Though the present findings showed a limited difference in salt concentration and pH between the cultivars of kimchi cabbages, this study suggests that there is a relationship between processed agricultural products and their pre- and post-harvest methods.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.388-395
• /
• 2019

The purpose of this study is to suggest structural model and analyze design factors for the development of small greenhouse standardization model. The average dimensions of small greenhouse desired by urban farmers were 3.3m in width, 1.9m in eaves height, 2.7m in ridge height, 5.7m in length. The cladding materials for small greenhouse were preferred to glass, PC board and plastic film, framework to aluminum alloy and steel, and heating method in electrical energy. In addition, it was analyzed that small greenhouses need to develop structural model by dividing them into entry-level type and high-level type. The roof type that was used for entry-level type was arch shape, framework was steel pipe, cladding material was plastic film. On the other hand, high-level type was used in even span or dutch light type, framework with square hollow steel, cladding materials with glass or PC board. In consideration of these findings and practicality, this study developed four types of small greenhouses. The width, eaves height, ridges height, and length of the small greenhouses of even span type, which were covered with 5mm thick glass and 6mm thick PC board were 3m, 2.2m, 2.9m, and 6m, respectively. The small greenhouse of dutch light type covered with 5mm thick glass was designed with 3.8m in with, 2.2m in eaves height, 2.9m in ridges height, and 6m in length. The width, eaves height, ridges height, and length of the arch shape small greenhouse covered with a 0.15mm PO film were 3m, 1.5m, 2.8m, and 6m, respectively.

• 연구논문집
• /
• s.30
• /
• pp.121-128
• /
• 2000

The failed tube received for this study has been used for approximately 10 year at $330^{\circ}C$ in a steam production boiler tube was fractured in the transversed direction to tube length, and fracture mode was typically intergranulas type without the plastic deformation. The fracture surface was covered by the oxide scale formed from the intermal high pressure steam at high temperature. The microstructure was not nearly thermal-degraded during the service. From this result, we can conclude that the oxide film was proferentialy formed into the grainboundary and this grainboundary oxide film was brittle-fractured by the thermal stress in the longitudinal direction to the tube brittle intergranular fracture mode.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.80-85
• /
• 2018

This study was carried out to clarify the effect of CHO-CO and PO film on air temperature in greenhouse and Korean melon fruit characteristics and yield. On January 8 in 2017, the maximum, minimum and average air temperature in greenhouse covered with CHO-CO film were $38.9^{\circ}C$, $13.4^{\circ}C$ and $20.1^{\circ}C$, respectively. At the same date, the maximum, minimum and average air temperature in greenhouse covered with PO film were $40.0^{\circ}C$, $14.9^{\circ}C$ and $20.3^{\circ}C$, respectively. On August 7 in 2017, the maximum, minimum and average air temperature in greenhouse covered with CHO-CO film were $47.2^{\circ}C$, $23.1^{\circ}C$ and $32.4^{\circ}C$, respectively, and the maximum, minimum and average air temperature in greenhouse covered with PO film were $50.3^{\circ}C$, $23.6^{\circ}C$ and $34.0^{\circ}C$, respectively. The results of investigation of qualities and yields of Korean melons from May 26 to August 15 in 2017 were as follows. The fruit weight of Korean melon harvested in CHO-CO film's greenhouse was 371.6g which was 22.2g less than that of PO film greenhouse. The sugar contents of Korean melon harvested in CHO-CO film greenhouse was $14.5^{\circ}brix$ which was $1.4^{\circ}brix$ greater than that of the fruits harvested in PO film greenhouse. The chromaticity (a-value) of fruit skin of Korean melon harvested in CHO-CO film greenhouse was 12.3 which was 1.5 greater than that of the fruits harvested in PO film greenhouse. The marketable yield rate of Korean melon harvested in CHO-CO film's greenhouse was 89.4% which was 8.0% higher than the fruits harvested in PO film greenhouse. The yield of Korean melon harvested in CHO-CO film's greenhouse was 2694kg per 10 a which was 26% more than that harvested in PO film greenhouse. In conclusion, the CHO-CO film could be effective to produce Korean melon in high temperature season.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.314-320
• /
• 2014

Three leaf vegetables, namely green lettuce, red lettuce (Lactuca sativa) and red-veined chicory (Cichorium intybus) were grown in minigreenhouses covered with two new functional films and conventional polyethylene film (PE). Seedlings of leaf vegetables were transplanted in a plastic troughs filled with soil-perlite mixture. Two functional films were made from polyolefin (PO) material. Measurement of optical characteristics showed that polyolefin films have better transmittance for the photosynthetic active radiation (PAR, 400-700nm) and higher absorptance for the ultraviolet radiation (UV, 300-400nm) in comparison with the conventional PE film. After three months of utilization higher loss in PAR transmittance was observed for conventional PE film. Leaf vegetables growth was enhanced and yield was increased in greenhouses covered by new functional films.

• Plant Disease and Agriculture
• /
• v.5 no.1
• /
• pp.20-26
• /
• 1999

Ultraviolet light is required for the sporulation of Didymella bryoniae, a gummy stem blight fungus in cucurbits such as watermelon, melon, oriental melon, cucumber and pumpkin. In this experiment, the upper limit of wave length for the production of pycnidia of D. bryoniae was 365 nm - 375 nm. Two plastic houses were covered with either common transparent film (wave length longer than 225 nm is transmitted) or UV-absorbing film ( wave lenght shorter than 388 nm is absorbed). In both houses, seedlings inoculated with D. bryoniae were placed in the center of the house at 30 days after transplantation of watermelon (cv. Whanhoseong), and the disease incidences between the houses were compared until 80 days after transplantation. The number of disease lesions and incidence of pycnidia-producing lesions under the UV-absorbing film were reduced by 90% and 80%, respectively, compared to the common transparent film. The internode lengths of plants grown in the two houses were not significantly different, but the plants grown under the UV-absorbing film had longer vines and more leaves than plants under the common transparent film. However, fruit characters such as weight, length, width, rind thick and brix, were not different between the two houses. Occurrence of aphids was reduced in the UV-absorbing film, but those of mites or diseases (powdery mildew and sooty mold) were not different between the houses. These results suggest that disease incidence of gummy stem blight of watermelon in the greenhouse can be controlled by the use of UV-absorbing film.