• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.269-279
• /
• 2005

In this study, detectors characteristics for simultaneous counting of alpha and beta ray in a pipe were estimated. The detector were composed of thin ZnS(Ag) scintillator and plastic detector. The scintillator for counting alpha particles has been applied a polymer composite sheet, having a double layer structure of an inorganic scintillator ZnS(Ag) layer adhered onto a polymer sub-layer. The other for counting beta particles used a commercially available plastic scintillator. It was confirmed that the detectors were suitable for counting the in-pipe contamination.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.142-144
• /
• 2008

본 논문은 정부의 연구 지원에 의해 참여기업인 (주)동명알피에프에 설치되고 있는 상용인 반연속식 로터리 킬른형 유화 장치 개발 현황에 대해 논하고자 한다. 본 공정의 특징은 지자체에서 수거된 EPR 종말품을 대상 원료로 하였고, 2기의 병렬로 설치된 킬른형 반응기를 사용하여 주기적 처리에 의해 효율적인 동시에,처리량을 크게 향상시켰다.이 반응 시스템은 용융 및 열분해가 동시에 이루어짐에 따라 공정은 단순하지만 생성 오일의 질이 저하되어 후단에 오일 고급화 공정과 정제 공정이 설치되어 최종 제품의 질을 향상시켰다.이에 대한 전반적인 현황과 공정 기술에 대해 언급되었다.

• 한국안전학회지
• /
• 제21권1호
• /
• pp.65-71
• /
• 2006

Flame retardancy and mechanical properties of polyolefinic mixed waste plastics/filler composites were investigated by using inorganic flame retardant(magnesium hydroxide) and PUB(polyurethane block) powder generated from cryogenic insulation process. All composites were obtained by extrusion and after compression molding. The effect of PUB powder on the properties of the composites was studied by tensile and izod impact test, morphology studies and flammability as LOI and UL94 vertical burning test and smoke density. The objective of this work is to obtain good mechanical properties from recycled PP composites with $Mg(OH)_{2}/PUB$ powder as fillers and optimum cost-performance balance, in addition to flame retardant characteristics.

• 자원리싸이클링
• /
• 제6권2호
• /
• pp.5-11
• /
• 1997

일본 전국의 도시쓰레기 배출량은 약 5,020만톤/년(1992년)으로 약 77%가 소각처리되고 최종잔사는 매립처분되고 있으나 최종 처분장의 사용연수가 약 7년으로 도시쓰레기 처분량의 감량이 시급히 요구되고 있다. 이러한 도시쓰레기 중 가연성인 종이, 플라스틱 등이 약 30%를 차지하고 있으며 이들은 연료로 이용될 수 있는 특성을 갖고 있다. 한편 일본의 폐플라스틱 발생량은 1,300만톤/년(1994년)으로이들의 약 23%가 재이용되고 있다. 도시쓰레기의 감량 및 재자원화를 위하여 1995년 6월에 "용기포장 리싸이클법"이 제정되었으며 관련업체별로 폐플라스틱을 회수하여 재이용하고 있다. 또한 최근 플라스틱을 포함한 도시쓰레기를 자원으로 이용하는 material recycle 방책, 유화기술, 소각에너지 이용, 고형 연료화 기술 등의 향후 추진 방향에 대하여 살펴보았다.대하여 살펴보았다.

• 공업화학전망
• /
• 제24권2호
• /
• pp.1-9
• /
• 2021

플라스틱은 가볍고 물성이 뛰어나며 가공이 용이하면서도 낮은 가격 때문에 우리의 실생활에서 매일 사용되고 있다. 동시에 썩지 않는 특성 탓에 폐플라스틱에 의한 환경오염의 문제가 심해짐에 따라 전 세계적으로 일회용 포장재 및 용기에 사용되는 플라스틱의 사용을 금지하는 규제 및 폐플라스틱을 재활용하려는 시도가 늘어나고 있다. 하지만 인류가 지난 수십 년간 생산한 플라스틱은 약 83억 톤이지만 이중 약 10%정도만 재활용 되었을 정도로 폐플라스틱의 재활용 비율은 미비하다. 특히, 최근 코로나 팬데믹으로 인해 택배 및 배달음식 주문량이 늘어남에 따라 플라스틱의 사용량이 급증하여 폐플라스틱의 재활용 필요성은 더욱더 커지고 있다. 본 기고문에서는 불균일 촉매를 이용한 수소첨가 폐플라스틱의 분해에 관한 최신 연구동향을 다루고자 한다. 안정적이고 반응성 및 선택성이 뛰어난 촉매 개발은 폐플라스틱의 효과적인 분해를 위해서 매우 중요하다.

• 한국잠사곤충학회지
• /
• 제43권1호
• /
• pp.41-48
• /
• 2001

The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3206-3212
• /
• 2023

We developed a miniaturized multi-dimensional radiation sensor system consisting of an inorganic scintillator array and plastic optical fibers. This system can be applied to remotely obtain the radioactivity distribution and identify the radionuclides in radioactive waste by utilizing a scanning method. Variation in scintillation light was measured in two-dimensional regions of interest and then converted into radioactivity distribution images. Outliers present in the images were removed by using a digital filter to make the hot spot location more accurate and cubic interpolation was applied to make the images smoother and clearer. Next, gamma-ray spectroscopy was performed to identify the radionuclides, and three-dimensional volume scanning was also performed to effectively find the hot spot using the proposed array sensor.

• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.137-142
• /
• 2018

Recycled synthetic resin materials produced from waste vinyl and waste plastic contain many foreign substances. Plastic products made from this recycled resin materials containing foreign substances are of poor quality, with reduced the strength and rigidity. Foreign substances include heavy metals, cement, foil, dyed paper and dust. In this study, the scratch-Dies process; which remove foreign sbustances, with precision and automation, through a three-stage mesh filter, is designed. The process is evaluated with finite element analysis according to vibration loading and make. After installing the manufactured equipment, recycled resin was producde, and its heavy metal content was evaluated. Recycled synthetic resin materials were also used plastic products and evaluate their strength. In addition, the change in production was assessed.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.189-193
• /
• 2006

Experiments were performed to investigate the melting characteristics of pellet fuel made of LDPE and PP for a waste plastic firing boiler. Pellet fuel in a burner goes through conduction, convection and radiation transferred from flame in a furnace, and complex thermo/chemical processes. To figure out effects of ambient temperature and size of pellet on melting time pellets with a diameter from 5 mm to 40 mm were made to contact high temperature flue gas generated by a LNG firing pilot burner. Though melting processes of plastics include complicated heat transfer in a burner, parameters are limited to flue gas temperature and size for the simplicity in this study. From the results, melting times of LDPE and PP with a diameter of 5mm are 63 and 62 secs respectively at 600 $^{\circ}C$ while 677 and 583 sees respectively for a diameter of 40 mm. At $900^{\circ}C$, melting times of LDPE and PP with a diameter of 5mm are 21 and 24 sees respectively while 408 and 337 secs respectively for a diameter of 40 mm. It is found that melting time of LDPE is longer than that of PP, and melting times of both in general increase with diameter of pellets. It is thought melting is dependent mostly on melting temperature of plastic. It is expected melting times obtained from the study might be taken into account in designing a pellet firing burner for a boiler

• 산업기술연구
• /
• 제38권1호
• /
• pp.9-13
• /
• 2018

FRP(Fiber Reinforced Plastic) ships are easy to manufacture and repair. Also they are more durable and cheaper than steel wires and neck lines. Therefore FRP ships are widely used in small ships. In Korea, the amount of waste FRP ships is increasing. It is expected that a large amount of waste FRP ships will be generated. Waste FRP ships are emerging as a social problem, such as the difficulty in preserving the marine environment. To improve this, a waste FRP ship melting process system has been developed. In order to construct an effective waste FRP ship processing system, it is necessary to study the treatment facilities location problem. In this paper, we suggest mathematical model to solve optimal location problem of waste FRP Ships and discuss on results by applying it to nine regions selected as candidates for treatment facilities.