• 한국수산과학회지
• /
• 제33권6호
• /
• pp.524-528
• /
• 2000

식품중에 오염된 Listeria monocytogenes의 열감수성에 미치는 각종 첨가물의 영향과 식품의 처리 가공시에 수반되는 조리기구 수세나 염소, 자외선, 열탕 등 각종 소독처리의 효율성을 확인하였다. 키토산, 솔빈산칼륨 둥은 시험균주 L. monocytogenes H-12의 열 감수성 증대에 유의할 만한 영향을 미치지 못하였으나, 명태 연육에 중합인산염을 $1{\%}$ 첨가할 경우 시험균주의 열감수성은 뚜렷히 증가되었다. 시험균주 L. monocytogenes H-12가 $약 10^4{\~}10^5/cm^2$ 되도록 오염시킨 나무, 플라스틱, 스테인레스 재질의 도마를 흐르는 수도수로 세척하였을 때 스테인레스 도마나 플라스틱 도마의 경우 각각 10초 및 1분 후에는 균이 검출되지 않았으나, 나무 도마에서는 거의 제균효과가 없었다. 스테인레스 및 플라스틱 재질의 도마를 $5{\~}50 ppm$의 염소용액에 10초간 침지하고 수세할 경우 오염균의 제거가 가능하였으나, 나무 도마의 경우 100ppm 염소용액으로 처리하여도 균 수의 감소는 거의 없었다. 15W의 자외선을 30cm 거리에서 시험균주로 오염된 각 재질의 도마에 조사할 경우 스테인레스 및 플라스틱 도마의 경우 5분간 조사 후에는 균이 검출되지 않았으나, 나무 도마에서는 60분 처리 후에도 균이 검출되었다. 각종재질의 조리용 도마에 오염된 시험균주 L. monocytogenes H-12의 열탕처리에 의한 제균조건은 $70^{\circ}C$, 10초 이상으로 확인되었다.

• Archives of Plastic Surgery
• /
• 제36권1호
• /
• pp.113-117
• /
• 2009

Purpose: Although Hydrofluoric acid(HF) is not a strong acid when compared to other hydrogen halides, it is a feared corrosive and is particularly dangerous at higher concentrations. HF burns are characterized by symptoms, often delayed and localized with diluted HF solutions, to include erythema, edema and severe pain. Pain, a well known symptom following exposure to calcium binding. And, EMLA$^{(R)}$ cream is a topical formulation based upon the eutectic mixture of lidocaine and prilocaine and is used in clinical settings to provide pain relief undergoing superficial surgical procedures. The aim of this study is to evaluate effects of EMLA$^{(R)}$ cream, pain - control dressing on the treatment for HF injury wound. Methods: From June 2007 to June 2008, this study was carried out with 10 patients who had HF partial thickness burns. We were applied topically EMLA$^{(R)}$ cream to injured wound with vaseline gauze and 10% calcium gluconate wet gauze dressings. As a principle, in the emergency treatment, partial or complete removal of the bullae along with copious washing with normal saline was done, depending on the degree of HF invasion of the distal digital extremities. The effect of dressing was investigated by visual analogue pain scale. Results: We therefore reviewed 10 cases of HF - induced pain and pain relief treatment principle. The 10 cases who came to the hospital nearly immediately after the injury healed completely without sequelae and EMLA$^{(R)}$ related complications. Conclusion: Proper initial treatment of HF burns are important, if not promptly recognized and properly treated, for produce serious injury. Topical EMLA$^{(R)}$ cream remain a powerful, new advancement for minimizing HF - related pain during dressing procedures. When used appropriately, topical EMLA$^{(R)}$ cream can provide a safe and effective alternative to other forms of HF - pain control treatment.

• Archives of Plastic Surgery
• /
• 제35권4호
• /
• pp.407-412
• /
• 2008

Purpose: Hydrofluoric acid(HF) is one of the most dangerous mineral acids with the dissociated fluoride ions. The initial corrosive burn is caused by free hydrogen ion, and the second and more severe burn is caused by penetration of fluoride ions into subcutaneous tissues. Silver is a cation producing dressing, an effective antimicrobial agent, but older silver-containing formulations are rapidly inactivated by wound environment, requiring frequent replenishment. But, $Acticoat^{(R)}$ is a relatively new form of silver dressing which helps avoid the problems of earlier agents. The aim of this study is to evaluate effects of $Acticoat^{(R)}$, silver-containing dressing on the treatment for HF injury wound. Methods: From september 2006 to september 2007, the study was carried out with 10 patients who had HF partial thickness burns. $Acticoat^{(R)}$ dressing and 10% calcium gluconate wet gauze dressings in 10 cases. As a principle, in the emergency treatment, partial or complete removal of the nail and early bullectomy along with copious washing with normal saline was done, depending on the degree of HF invasion of the wound. Wound was dressed with $Acticoat^{(R)}$ and 10% calcium gluconate solution. The effect of dressing was investgated by serial bacterial culture and wound exudates assessment. Results: We therefore reviewed 10 cases of HF-induced chemical burns and treatment principle. The 10 cases who came to the hospital nearly immediately after the injury healed completely without sequelae. Conclusion: As the industrial sector develops, the use of HF is increasing more and more, leading to increased incidences of HF-induced chemical burns. The education of patients regarding this subject should be empathized accordingly. In conclusion, $Acticoat^{(R)}$ dressing is a better choice for HF partial thickness burn injuries because of shorter healing time, less pain and more comfortable dressing.

• 한국정밀공학회지
• /
• 제25권1호
• /
• pp.99-107
• /
• 2008

There are being a lot of studies for achievement of high speed Dehydration, high-strength and Lightweight of washing machine in the latest washing machine business. It is essential that strength of mechanical press-Joining (MPJ) for spin drum is improved to attain that target. MPJ of spin drum is composed of seaming and caulking process. Because Seaming process of MPJ has various design factors such as thickness, bending radius, seaming width, caulking press width and the dynamic factor such as multistage plastic working, elastic recovery, residual stress, the optimum conditions can't be easily determined. Using a design of experiment (DOE) based on the FEM (Finite Element Method), which has several advantages such as less computing, high accuracy performance and usefulness, this study was performed investigating the interaction effect between the various design factor as well as the main effect of the each design factor during drum MPJ and proposed optimum condition using center composition method among response surface derived from regression equation of simulation-based DOE.

• 한국토양비료학회지
• /
• 제45권2호
• /
• pp.135-142
• /
• 2012

염류집적 토양의 교환성 양이온을 분석할 때 수용성 양이온이 많이 존재하는 경우 교환성 양이온이 높게 측정될 수 있으므로 수용성 양이온을 제외한 교환성 양이온을 측정하여야 한다. 수용성 양이온을 제거하기 위하여 전처리 과정 중 알콜 등으로 세척을 하거나 전체 양이온을 구한 후 포화 용액 중 녹아있는 수용성 양이온을 빼는 방법이 있다. 본 실험 결과 시설재배지 토양의 경우 전처리에서 세척하는 방법을 사용해도 타당할 것으로 판단되나, Na 함량이 높은 간척지 토양은 포화용액에 녹아있는 수용성 양이온을 빼야 정확한 교환성 나트륨을 구할 수 있다고 판단되었다. 또한 $EC_e$가 4 이하인 토양에서는 수용성 양이온을 제외할 필요가 없었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.37.1-37.4
• /
• 2015

Keratocystic odontogenic tumors can occur in any area of the maxilla or mandible. According to their size, location, and relations with surrounding structures, they are treated by cyst enucleation or enucleation after either marsupialization or decompression. Enucleation is performed when cysts are not large and when only minor damage to adjacent anatomical structures is expected. Although marsupialization and decompression follow the same basic bone-regeneration principle, which is to say, by reducing the pressure within the cyst, the former leaves a large defect after healing due to the large fistula necessary to induce the conversion of the cyst-lining epithelia to oral epithelia; the latter leaves only a relatively small defect, because of the continuous washing carried out by means of a tube inserted into a small hole in the cyst. In the latter case too, a decompressor appropriate for the focal position is required, owing to the importance of maintaining the device and controlling for oral hygiene. We report herein decompression treatment with a patient-customized device for an extensive cyst in the anterior region of the mandible.

• 한국토양비료학회지
• /
• 제43권5호
• /
• pp.565-571
• /
• 2010

시설하우스 내 토양의 염류를 제거하기 위한 기존 관수제염의 문제점은 담수 시 염류가 심토층으로 이동하게 되며 심토층으로 이동된 염류는 시설하우스 내 모세관현상으로 다시 표토층으로 용출되어 순환을 하는 것이다. 이를 해결하기 위하여 기존의 관수제염법을 일부 수정한 방법을 개발하였다. 토양을 담수시킨 후 부유물질을 침전시키고 상등액의 일부를 외부로 빼줌으로써 토양 하부로 염류가 이동하지 않도록 하는 방법이다. 이 방법을 통해 심토층으로 염류가 확산이 되지 않았으며 모세관 현상에 의한 염류의 재집적을 방지 할 수 있을 것으로 판단된다. 또한 밖으로 유출되는 상등액에는 질소, 인, 칼리 등 비료성분을 포함하고 있어 비료로 재이용될 수 있을 것으로 판단된다. 소량의 MgO 투여와 30분 침전을 통해 담수의 탁도 성분을 초기 탁도의 95%이상을 침전 시킬 수 있었다. 담수 내에 암모니아와 인을 함유하고 그들의 농도가 줄어든 것으로 보아 일부 struvite 침전이 이루어졌으며 토양 내에서 천천히 용해되어 작물이 이용할 수 있을 것으로 판단된다.

• 한국인쇄학회지
• /
• 제28권2호
• /
• pp.13-30
• /
• 2010

Existing domestic ink market had some problem because of dependence on CPP import, increasing cost, competitive price. For this reason, previous speed of research and developments are very slow. Therefore, develop the new waterborne type of non-chlorine resin, enhance the nation's position with manufacturing outstanding products. Through this thesis, the purpose is mix the polar resin and non-chlorine resin with many proportion and manufacturing better product than existing resin. Pilot production samples have run the test of adhesion, transparency, water resist and resist high pressure car washing. In conclusion, this thesis found that mix acryl Urethane resin and Non-Chlorine resin is the optimum condition.

• Archives of Plastic Surgery
• /
• 제49권2호
• /
• pp.266-274
• /
• 2022

Background Many authors have researched ways to optimize fat grafting by looking for a technique that offers safe and long-term fat survival rate. To date, there is no standardized protocol. We designed a "hydraulic system technique" optimizing the relationship among the quantity of injected fat, operative time, and material cost to establish fat volume cutoffs for a single procedure. Methods Thirty-six patients underwent fat grafting surgery and were organized into three groups according to material used: standard, "1-track," and "2-tracks" systems. The amount of harvested and grafted fat as well as material used for each procedure was collected. Operating times were recorded and statistical analysis was performed to establish the relationship with the amount of treated fat. Results In 15 cases the standard system was used (mean treated fat 72 [30-100] mL, mean cost 4.23 ± 0.27 euros), in 11 cases the "1-track" system (mean treated fat 183.3 [120-280] mL, mean cost 7.63 ± 0.6 euros), and in 10 cases the "2-tracks" one (mean treated fat 311[220-550] mL, mean cost 12.47 ± 1 euros). The mean time difference between the standard system and the "1-track" system is statistically significant starting from three fat syringes (90 mL) in 17.66 versus 6.87 minutes. The difference between the "1-track" system and "2-tracks" system becomes statistically significant from 240 mL of fat in 15 minutes ("1-track") versus 9.3 minutes for the "2-tracks" system. Conclusion Data analysis would indicate the use of the standard system, "1-track," and "2-tracks" to treat an amount of fat < 90 mL of fat, 90 ÷ 240 mL of fat, and ≥ 240 mL of fat, respectively.

• 한국물환경학회지
• /
• 제40권1호
• /
• pp.36-46
• /
• 2024

Microplastics in water resources have been recognized as a serious problem. The discharge of microplastics from wastewater treatment plants is considered a major contributor to environmental pollution in water resources. However, a reliable analytical method for quantifying microplastics in wastewater treatment plants has not yet been established. This study proposes a reliable, quick, and easy analytical method for quantifying microplastics. For the removal of organic particles, preprocessing steps were applied including oxidation, sonication, washing, and sieving. Nile Red staining was used to visualize microplastics, and quantitative analysis was conducted using fluorescent imaging. The stained microplastics were ultimately quantified through image analysis software. Among the preprocessing steps, sonication and washing stages were particularly effective in efficiently removing interfering substances from wastewater, enhancing the accuracy of the microplastic analysis. Additionally, various solvents (methanol, acetone, and N-hexane) for the Nile Red staining solution were tested. When N-hexane was applied as the solvent, the quantity of stained microplastics was lower compared to methanol and acetone. This suggests that N-hexane has a greater potential of reducing false staining and counting of non-plastic particles. In summary, this research demonstrates a robust method for quantifying microplastics in wastewater treatment plants by employing effective preprocessing steps and optimizing the staining process with Nile Red and N-hexane.