• Design & Manufacturing
• /
• 제14권1호
• /
• pp.15-21
• /
• 2020

Smart systems in different application areas such as automotive, medical and consumer electronics require a novel manufacturing method of electronic, optical and mechanical functions into products. Traditional methods including mechanical assembly, bonding of plastic and electronic circuit cause the problems in large size of products and complicated manufacturing processes. In this study, thermoforming and film insert molding were applied to fabricate a dome shaped plastic part embedded with electronic circuits. The deformation of patterns printed on PET film was predicted by thermoforming simulation using T-SIM, and the results were compared with those by experiment. In order to decrease spring-back after thermoforming, the Taguchi method of design of experiment was used. Through ANOVA analysis, it was found that mold temperature was the most dominant parameter for spring-back. By using flow analysis, gate design was performed to decrease injection pressure. During film insert molding, the wash-out of ink printed on film occurred for Polycarbonate. When the resin was changed to PMMA, the wash-out disappeared due to low melt temperature.

• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.31-36
• /
• 2011

CF(Circular Fresnel) POF(Plastic Optical Fiber) daylighting system is a beam daylighting system utilizing solar direct beam radiation. In this study, a CF POF daylighting system has been introduced, developed and applied to KIER test buildings. The CF POF daylighting system consists of three parts: light collector, light transmitter and light diffuser. The light collector includes a Circular Fresnel lens focusing solar direct illuminance by sun tracking. The light transmitter contains the POF cable which has light transmission loss of 4.5% per meter. The light diffuser has about 80% diffuser efficiency. This study aims to evaluate of POF daylighting system performance. At the results of a CFPOF system performance evaluation, the theoretical CFPOF system efficiency was 41.9% and the actual CFPOF system efficiency at the KIER test building was 37.5%. The difference was due partly to the connecting efficiency.

• Journal of Trauma and Injury
• /
• 제32권3호
• /
• pp.187-193
• /
• 2019

Many techniques have been developed for reconstruction of the hand; however, less attention has been paid to foot reconstruction techniques. In particular, reconstruction of the forefoot and big toe has been considered a minor procedure despite the importance of these body parts for standing and walking. Most of the weight load on the foot is concentrated on the forefoot and big toe, whereas the other toes have a minor role in weight bearing. Moreover, the forefoot and big toe are important for maintaining balance and supporting the body when changing directions. Recently, attention has been focused on the aesthetic appearance and functional aspects of the body, which are important considerations in the field of reconstructive surgery. In patients for whom flap reconstruction in the forefoot and big toe is planned, clinicians should pay close attention to flap survival as well as functional and cosmetic outcomes of surgery. In particular, it is important to assess the ability of the flap to withstand functional weight bearing and maintain sufficient durability under shearing force. Recovery of protective sensation in the forefoot area can reduce the risk of flap loss and promote rapid rehabilitation and functional recovery. Here, we report our experience with two cases of successful reconstruction of the forefoot and big toe with a sensate anterolateral thigh flap, with a review of the relevant literature.

• Design & Manufacturing
• /
• 제15권4호
• /
• pp.32-36
• /
• 2021

In this study, the cause of the decrease in transmittance of the outer lens among the causes of the decrease in the amount of light in the automobile headlamp was identified, and the improvement method was selected to determine the effect. The causes of defects that lower the transmittance of the outer lens are divided into a moisture problem and a haze problem. The moisture problem is caused by the temperature difference between the inside and the outside of the head lamp, and the haze problem occurs when the heat inside the head lamp evaporates the haze component contained in the plastic material and attaches it to the outer lens. In order to improve the haze problem that occurs in plastic raw materials, the structures of the bulb light source type headlamp and the LED chip light source type headlamp were analyzed. Among them, the housing material of the LED chip light source type headlamp, which is structurally prone to haze gas, was selected as the test target. In the mass-production injection process of the housing, the drying process was selected as a method to minimize haze gas without adding a separate production process. After extracting a sample every drying time at a constant drying temperature, the sample was put into a haze tester and the residual amount of haze gas was measured. As a result, it was confirmed that the residual amount of Haze gas in the material decreased as the drying time increased.

• 수산해양교육연구
• /
• 제12권2호
• /
• pp.152-163
• /
• 2000

Floating resin pellets including plastics were surveyed from 7 coastal beaches near Young-il Bay during summer and winter season on 1998 ~ 2000 year. Plastic fabrication materials in the survey were founded with 6 items using the following; resin pellets, plastic debris, styrofoams, cigar filters, wood pieces and charcoals. The results deduced in the areas are as follows: 1. The seasonal variability of the all debris is revealed that summer season were remarkably larger than those of winter. This is deduced it is attributed to meteorological effects, e.g, the seasonal wind strength, current vectors and resorts of crowded people for beach enjoy. And the distribution of plastic debris is Pohang Songdo $12.9ea/m^2$, Pohang Bookbu $8.8ea/m^2$, Togoo $4.9ea/m^2$, Chilpo $3.2ea/m^2$, Hwajin $1.4ea/m^2$, Wolpo and Guryongpo $0.8ea/m^2$ respectively. 2. Compared with each beaches, Songdo beach, northern part beach of Pohang city and Togoo beach have higher densities than those of the others. Especially, the highest densities of all debris were discovered in the Songdo beach of Pohang city. 3. The change of density over the whole year was similarly distributed in quantities and fabrication materials. 4. These surveys were founded that the most parts of plastic debris materials were made up with PE and PP.

• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1091-1097
• /
• 2011

본 논문은 자동차용 시트의 내부에 설치되어 탑승자의 등 부위를 지지하여 편안한 승차감을 제공하는 자동차용 시트의 플라스틱 서스펜션 어셈블리 개발에 관한 것이다. 운전자의 허리를 균등하게 지지하여 주는 구조를 갖도록 설계하고 시트 백 프레임과 플라스틱 서스펜션이 원활하게 조합될 수 있는 구조로 개발하고자 한다. 체압 분포 특성을 고려하여 서스펜션의 단품을 설계하고 기능성을 평가하였다. 또한 실제와 동일한 사이즈의 서스펜션을 모델링하고 구조해석을 수행하였다. 기존 스프링 서스펜션과 새로 개발된 플라스틱 서스펜션의 해석결과 및 실제 측정값이 유사함을 확인하고 최적의 해석 및 설계를 확립하였다.

• 한국세라믹학회지
• /
• 제13권1호
• /
• pp.35-44
• /
• 1976

The effect of quartz which exists in clays, especially in kaolin used for the production of chamotte sagger, on the strength of refractory was examined. In this study, a mixture of chamotte 50%, kaolin 25%, plastic clay 25% in ternary component system was selected as a batch composition. To this mixture 1%, 3% and 5% of feldspar and sericite were added respectively. The plastic clay used here was separated under 170 mesh by dry process. Feldspar and sericite were separated under 325 mesh by dry process. Feldspar and sericite were separated under 325 mesh by dry process. In order to change the particle size and the content of quartz, the kaolin was separated under 60, 115, 170 and 325 mesh by wet process, substituted quartz for coarse parts of it. Chamotte was classified into three grades, coarse (5-10mesh): medium (10-20mesh): fine(20-115mesh) and the ratio was 1:1:1. Samples were formed in 0.8xIx10cm size with 12.5% water at 160kg/$\textrm{cm}^2$ pressure, and fired at 130$0^{\circ}C$ for 1 hr. The fired samples were ivnestigated by means of x-ray diffraction analysis and microscopic observation, and the physical properties of them were also examined, such as firing shrinkage, apparent specific gravity and bulk specific gravity, apparent porosity, water absorption and modulus of rupture. The obtained results are as follows: 1. When screened kaolin with low content of quartz was added to fixed chamotte-plastic clay system, the sample lowered modulus of rupture and increased apparent porosity as the size of kaolin became finer. 2. When kaolin under 325 mesh with 7.2-15.81% quartz between 60-325 mesh was added to fixed chamotte-plastic clay system, the sample had higher apparent porosity and lower modulus of ruputure as the size and the amount of quartz became larger. 3. The addition of feldspar and sericite to chamotte-plastic clay system improved apparent porosity and modulus of rupture. The effect of feldspar was better when quartz content was low, although that of sericite was better than quartz content was high.

• 대한두경부종양학회지
• /
• 제24권2호
• /
• pp.203-206
• /
• 2008

Objectives：DFSP(Dermatofibrosarcoma protuberans) is an uncommon, slowly growing, locally invasive malignant tumor that usually presents as a painless, often long-standing mass arising in the dermis of skin. It occurs most frequently on the trunk and proximal parts of the limbs, less commonly in the head and neck region and has a frequent tendency to recur after surgical excision. Clinically, the initial appearance of the tumor similar to that of benign tumor such as keloid and dermatofibroma. Therefore, accurate clinical diagnosis and adequate surgical excision are important. Materials and Methods：We experienced 6 patients of DFSP in head and neck during the recent 6 years, 5 male and 1 female patients. The age of the patients ranged from 31 to 66. As reconstructive methods, the authors used cervicofacial flap, trapezius musculocutaneous flap, TRAM flap, anterolateral thigh free flap and skin graft. Results：The patients were followed up after operation from 24 to 79 months and all remained free of disease except one case, who occurred at forehead area. Conclusion：We present the experience of 6 cases of DFSP occurred in head and neck. We obtained satisfactory results with appropriate diagnosis and treatment which wide excision with surgical margins 3-5cm. We also present an operative plan of this locally aggressive and highly recurrent tumor.

• 한국기계가공학회지
• /
• 제5권1호
• /
• pp.27-32
• /
• 2006

Thermoplastic elastomer(TPE) has many advantages such as high flexibility, high elasticity and high elongation, etc. TPE is easily molded as plastic materials, therefore, many TPE parts are applied as home appliances and mechanical parts. However, its mechanical properties would be changed by injection molding conditions such as melt temperature, mold temperature, injection pressure and holding pressure, etc. In this study, the influences of the injection molding condition on the mechanical properties as tensile strength, hardness of thermoplastic vulcanizates(TPVs), which is one of the TPE, were investigated. By the injection molding experiment, the molding's tensile strength and hardness was influenced on the melt temperature and composition ratio of PP and EPDM. The morphology of moldings were shown by the scanning electron microscope.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.90-96
• /
• 2009

Injection molding process is one of the most important methods to produce plastic parts with high efficiency and low cost. Today, injection molded parts have been increased dramatically the demand for high strength and quality applications. This report investigates that the optimum injection molding condition for minimum of shrinkage. Molding shrinkage is occurred by several reasons such as thermal shrinkage, a hardening process and compressibility. This report concentrate on shrinkage by a hardening process. As Change a holding pressure and holding time, checked deflections of X, Y, Z directions by shrinkage based on same condition. In conclusion, it was found that holding pressure is stronger and holding time is longer, the deflection by shrinkage is smaller because injection molding needs enough time for cooling and high density. The FEM Simulation CAE tool. Moldflow, is used for the analysis of injection molding process.