• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.132-137
• /
• 2012

To enhance the CAE accuracy, the definition of material behavior is one of key influence on the result. In case of plastic material with fiber reinforcement, the anisotropic material behavior should be taken into account to increase of CAE accuracy. BASF has developed an innovative CAE tool, ULTRASIM$^R$, which is capable of generating material models of thermoplastic materials for structural simulation. ULTRASIM$^R$, not only the glass fiber orientation effect, but also the weld line effect, tensile-compression anisotropy, strain rate effect are combined in a non-linear material law, which will be evaluated in a unique failure criterion, thus resulting in an highly accurate CAE approach.

• 한국공간구조학회논문집
• /
• 제13권4호
• /
• pp.41-47
• /
• 2013

For the artistic column used by Glass Fiber Reinforced Plastic(GFRP), the connection of steel with GFRP were needed. Due to the fabricating characteristics of hand laminating, GFRP surfaces had to be connected. Because there were no existed data of these connection, experimental study has to be followed so that the structural strength and buckling mode could be investigated. In this paper, therefore, the axial tests of steel with GFRP were performed. The connection of GFRP's surfaces could be also tested as well. As a result, it could be figured out that the strength of these connections were determined by the adhesive strength.

• 센서학회지
• /
• 제21권2호
• /
• pp.151-155
• /
• 2012

We have investigated a refractive index sensor based on a cladded plastic optical fiber taper. The optical transmission and sensing characteristics of the device were illuminated in terms of ray optics. The sensor devices showed that the optical transmittance strongly depends on the refractive index of the external medium surrounding the tapered region.

• 한국항공운항학회지
• /
• 제17권4호
• /
• pp.42-47
• /
• 2009

Recently, the wide range of the composite materials is used for the making airplanes, trains and automobiles body for the lightweight. Despite having complex structures, composite materials usually have well defined mechanical characteristics. However, composite materials are difficult to understand the fracture mechanism clearly by simple mechanical test. Nondestructive evaluation (NDE) combined with mechanical testing can play a more important role and especially Acoustic Emission Testing (AET) would become known to be a useful tool to assess damage and fracture behavior of composites. In this study The experiment was performed to acquire the acoustic emission signal during tensile test using unidirectional CFRP specimen and the data was analyzed the acoustic emission parameters with the waveform.

• 콘크리트학회지
• /
• 제5권3호
• /
• pp.80-85
• /
• 1993

• 섬유기술과 산업
• /
• 제2권3호
• /
• pp.333-347
• /
• 1998

• 공학교육연구
• /
• 제20권1호
• /
• pp.63-68
• /
• 2017

This research is as a case study of innovative engineering education system through idea factory of korea maritime and ocean university and deals with development of temperature-humidity control device (THCD) for fiber storage on composites in viewpoint of problem solving method. Fiber reinforced plastic (FRP) includes many variables on the composite manufacturing process. Above all, the interfacial adhesion between the fiber and the matrix acts as an important thing that decided mechanical property of the FRP, and also it is profoundly linked to external temperature and relative humidity. High void fraction leads to a result in interlaminar fracture. Therefore, in this research, to establish correlation between fiber reinforcement and fiber storage conditions of temperature and relative humidity we developed a THCD for fiber reinforcement. To evaluate performance of the THCD, glass fiber reinforced plastic (GFRP) is made under the extreme conditions each temperature $34^{\circ}C$, relative humidity 98 % and it can be said that there are the change of mechanical properties according to fiber storage conditions. As a result, the THCD showed sufficient possible application for understanding and applied research of composites field in material engineering. Also, we could check that the necessity of introduction of innovative system such as idea factory existed.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.147-151
• /
• 2001

This study was performed to evaluate the internal and external factors affecting external strength of the 3-layer polymer composite pipes made of polymer mortar and fiber-glass reinforced plastic. Twenty four sandwich type 3-layer polymer composite pipes were made of polymer mortar and fiber-glass reinforced plastic by centrifugal method. The objective of this study was to evaluate the effects the of polymer mortar thickness for and core fiber-glass contents per unit area on external strength of 3-layer polymer composite pipes. For the more economical and practical design of 3-layer polymer composite pipe, further study should be done for the various polymer mortar, fiber-glass and different ratio of the inside/outside FRP thickness.

• 대한기계학회논문집A
• /
• 제39권10호
• /
• pp.963-970
• /
• 2015

다양한 분야에서 금속 재료의 우수한 기계적 특성을 위해 경량화는 필수적이다. 최근에는 보다 효율적인 차체 경량화와 함께 내충격성 강화를 위하여 금속 부품 대신에 섬유 금속 적층판을 이용하는 연구가 활발히 진행되고 있다. 경량화를 위해서 자동차 및 항공기에서 복합재료나 샌드위치 구조로 이루어진 섬유 금속 적층판이 유용하다. 하지만, 섬유 금속 적층판 형태에 따른 기계적 특성이 도출되지 않은 실정이다. 본 논문에서는 적층판 두께 조합에 따른 특성 비교를 위하여 두께를 인자로 하고, 섬유 금속 적층판의 완전 요인 배치법으로 실험을 계획한다. 또한 유한요소 해석을 사용하여 알루미늄 판과 섬유 금속 적층판을 탄성과 소성 해석을 한다. 이를 통해 적층판 두께 조합에 따른 섬유 금속 적층판 형태에 따른 기계적 특성을 분석하고, 굽힘 대변형 거동을 예측하는 유한요소 해석모델을 구축한다.

• Composites Research
• /
• 제16권2호
• /
• pp.26-32
• /
• 2003

레이저 융착된 광섬유의 절단 부위에 대한 보호를 위한 관심이 크게 높아지고 있다 일반적으로 절단된 광섬유의 융착부분은 다른 부위에 비해 상대적으로 매우 취약하며 이러한 이유로 광섬유를 광 통신망에 사용할 때 동일 부분에서의 손실이 추가적으로 일어날 수 있다 일반적으로 광섬유 융착 부위는 일반 광섬유의 파괴 강도에 비해 약 1/10인 0.4～l kg로 감소된다. 이러한 이유로 인해 광 융착 부위의 보강이 절실히 요구되고 있다. 그러나, 이러한 구조물의 대부분이 철심 형태의 구조물을 삽입한 슬리브로 보강됨에 따라 굽힘에 대해 효과적으로 대응하지 못할 뿐 아니라 일단 구조물이 굽혀졌을 경우에는 지속적인 광 손실을 발생시키는 요인이 된다. 이러한 문제점을 보완하기 위하여 복합재료로 제작된 코일형 스프링 구조물 형태의 슬리브가 제안되었다. 이러한 슬리브는 기존의 슬리브의 취약점이었던 직하중에 대해 서로 효과적으로 반응할 뿐 아니라 굽힘 및 인장/압축 하중에도 효과가 있음을 알 수 있었다.